• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.158-167
• /
• 2012

This research began by considering that, although architecture and architectural culture of the last two decades seem to have rediscovered ornament and some recent studies have reconsidered the ornamental issues of contemporary buildings, there is currently some difficulty in providing a synthetic investigation of this topic, because of the complex nature of the contemporary architectural situation. Following this premise, this research provides some reference points for further studies that will aim to expand the understanding, and attempt to classify and hypothesize the future of contemporary ornamental phenomena. Based on the assumption of the historical continuity of ornamental problems, and adopting the relation - both technical and aesthetic - between ornament and structure as one of the crucial issues to link past and present problems, the study firstly defines two categories and two sub-categories concerning the relation between ornament and structure, namely: a) ornament integral with the structure and b) ornament applied to the structure; a1) ornament visually expressing the structure and a2) ornament not visually expressing the structure. The study then reviews the historical development of ornament from ancient times to the present in the light of the above mentioned categories, and finally discusses the principles of traditional and modern ornament thus analyzed in relation to contemporary ornamental trends, as identified in selected case studies. Some common points between past and contemporary experiences are revealed in order to facilitate further investigations. In particular, the analysis shows a certain trend in contemporary architecture for a strong link between ornamental treatment and the structure of the building and a current tendency among contemporary designers to keep the exterior appearance of the building project separate from the design of the rest of the construction.

• KIEAE Journal
• /
• v.9 no.5
• /
• pp.47-52
• /
• 2009

Currently, the environmental issue is of great urgency and sensitivity to the future of our planet. Global warming caused by increased CO2 concentration has an alarming impact on the earth's fragile environment. Droughts throughout the world are causing crop failures. Wildfires now burn with far greater rage. Melting ice caps and glaciers are causing floods. Sea levels are rising. Warm unseasonable winters are threatening our fragile eco-systems. Global warming is no longer a theory; it is an obvious fact we are confronted with every day, and the only way we can prevent it is to take action now. The need to reduce CO2 emissions and try to become carbon neutral is of national importance and leadership. We have become so reliant on fossil fuels that nearly everything we do generates CO2 emissions; from our modern farming practices to transport, to the electricity used to turn on a light, boil water in a kettle or cook our meals. A reduction of 50% of CO2 emissions can easily be achieved by decreasing the energy amount used. We tracked the carbon footprint throughout the electricity and heating energy use in homes and confirmed the amount of carbon emissions according to its consumptions. In order to reduce the carbon generation from housing constructions, such as Passive House concept of buildings or low energy buildings, we must adjust its applications best fit to our conditions. And technical elements should be applied to improve our conditions, and the methodology should be actively sought. Most of all, each individual's recongnition who uses these elements is more important than any other solutions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.209-222
• /
• 2014

NCW is a new operational concept for modern warfare to improve the ability to conduct combat by connecting command and control system via network. To realize NCW integrating information sharing system between multiple platforms, CDL is considered as a key component for high-speed transmission of ISR data. Accordingly, further studies to enhance the performance of CDL are being performed around the world, and our government has also developed self-reliant CDL, MPI-CDL. However, the maximum data rate and networking performance of current CDL still fall short of the objective to enable multiple systems to share the large ISR data. Therefore, in this paper, we analyze the development flow and international technical trends of CDL, and present an approach for enhancing data rate and networking capacity of the next generation CDL.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.75-80
• /
• 2006

ILO has contributed for seafarers to promote conditions of employment and decent work through maritime labour standards. Between 1920 and 1996, a total of 39 Conventions and 29 Recommendations concerning seafarers have been adopted, which demonstrates the import part of ILO activities devoted to seafarers' questions. But many instruments were outdated, deficient and not reflective of modern practice, many contained technical detail which discouraged ratification. the Governing Body of ILO, at its 262nd Session(March-April 1995), decided to set up a Working Party regarding the revision of maritime labour standards. This Working Party initiated its examination of maritime instruments to 273rd Session(November 1998) of the Governing Body. The review made by the Working Party has concluded that existing maritime Conventions were considered either up to date or were identified for promotion, most of which were approved by the Governing Body. Therefore, ILO started to create a single, coherent instrument embodying as far as possible all up-to-date standards of existing maritime labour convention. The Maritime Labour Convention 2006 has been adopted in February 2006. This paper aims to analyze the significance of this convention and the influence regarding to maritime labour affairs in the field of shipping industry.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.115-119
• /
• 2007

ILO has contributed for seafarers to promote conditions of employment and decent work through maritime labour standards. Between 1920 and 1996, a total of 39 Conventions and 29 Recommendations concerning seafarers have been adopted, which demonstrates the important part of ILO activities devoted to seafarers' questions. But many instruments were outdated, deficient and not reflective of modern practice, many contained technical detail which discouraged ratification. The Governing Body of ILO, at its 262nd Session(March-April 1995), decided to set up a Working Party regarding the revision of maritime labour standards. This Working Party initiated its examination of maritime instruments to 273rd Session(November 1998) of the Governing Body. The review made by the Working Party has concluded that existing maritime Conventions were considered either up to date or were identified for promotion, most of which were approved by the Governing Body. Therefore, ILO started to create a single, coherent instrument embodying as far as possible all up-to-date standards of existing maritime labour conventions. The Maritime Labour Convention 2006 was adopted in February 2006. This paper aims to analyze the significance of this Convention and the influence regarding to maritime labour affairs in the field of shipping industry.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.47-53
• /
• 2005

The efficiency of fabrication (fab) operation is one of the key factors in order for a semiconductor manufacturing company to stay competitive. Optimization of manpower and forecasting manpower needs in a modern fab is an essential part of the future strategic planing and a very important to the operational efficiency. As the semiconductor manufacturing technology has entered the 8-inch wafer era, the complexity of fab operation increases with the increase of wafer size. The wafer handling method has evolved from manual mode in 6-inch wafer fab to semi-automated or fully automated factory in 8-inch and 12-inch wafer fab. The distribution of manpower requirement in each specialty varied as the trend of fab operation goes for downsizing manpower with automation and outsourcing maintenance work. This paper is to study the specialty distribution of manpower from the requirement in a typical 6-inch, 8-inch to 12-inch wafer fab. The human resource planning in today’s fab operation shall consider many factors, which include the stability of technical talents. This empirical study mainly focuses on the human resource planning, the manpower distribution of specialty structure and the forecast model of internal demand/supply in current semiconductor manufacturing company. Considering the market fluctuation with the demand of varied products and the advance in process technology, the study is to design a headcount forecast model based on current manpower planning for direct labour (DL) and indirect labour (IDL) in Taiwan’s fab. The model can be used to forecast the future manpower requirement on each specialty for the strategic planning of human resource to serve the development of the industry.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2017

Objectives: The major objectives of this study are to review the requirements for the advancement of occupational safety and health administrative organization and to propose measures to establish an Occupational Safety and Health Executive. Methods: The problems of occupational safety and health administrative organization in korea were examined empirically and cases of occupational safety and health administrative organizations in developed countries were investigated (United Kingdom, United States, Germany, and Japan). A plan for establishing an Occupational Safety and Health Executive was proposed over the short and medium term. Results: An occupational safety and health administration is characterized by a professional and technical nature, and even more so in modern society. Therefore the greatest value required by an occupational safety and health administrative organization is expertise. In addition, administrative values it requires include efficiency, specificity, independence, and activity. The Korean occupational safety and health administrative organization has a number of problems in terms of these values. The most appropriate way to realize these values is to establish an Occupational Safety and Health Executive. It is desirable to establish such an Occupational Safety and Health Executive in a phased manner taking into consideration its relationship with Korea Occupational Safety and Health Agency(KOSHA), including KOSHA's functional adjustment Conclusions: In order to solve the deep-seated problems in occupational safety and health administrative organization and to advance occupational safety and health administration in Korea, it is necessary to establish an Occupational Safety and Health Executive as a foundation for achieving an advanced industrial safety and health administration.

• Geomechanics and Engineering
• /
• v.11 no.1
• /
• pp.1-39
• /
• 2016

The finite element method (FEM), discrete element method (DEM), and Discontinuous deformation analysis (DDA) are among the standard numerical techniques applied in computational geo-mechanics. However, in some cases there no possibility for modelling by traditional finite analytical techniques or other mesh-based techniques. The solution presented in the current study as a completely Lagrangian and mesh-free technique is smoothed particle hydrodynamics (SPH). This method was basically applied for simulation of fluid flow by dividing the fluid into several particles. However, several researchers attempted to simulate soil-water interaction, landslides, and failure of soil by SPH method. In fact, this method is able to deal with behavior and interaction of different states of materials (liquid and solid) and multiphase soil models and their large deformations. Soil indicates different behaviors when interacting with water, structure, instrumentations, or different layers. Thus, study into these interactions using the mesh based grids has been facilitated by mesh-less SPH technique in this work. It has been revealed that the fast development, computational sophistication, and emerge of mesh-less particle modeling techniques offer solutions for problems which are not modeled by the traditional mesh-based techniques. Also it has been found that the smoothed particle hydrodynamic provides advanced techniques for simulation of soil materials as compared to the current traditional numerical methods. Besides, findings indicate that the advantages of applying this method are its high power, simplicity of concept, relative simplicity in combination of modern physics, and particularly its potential in study of large deformations and failures.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.9-17
• /
• 2003

The UV hard coating materials are attracting more and more attention to modern industry, in terms of the development of low or non solvent coating materials which will contribute to economizing both materials and energy and to reducing pollution. This study was performed in order to invent UV curable coating materials containing colloidal silica which have actual industrial applications. As results of experiments, the oligomers type and the concentration of colloidal silica acrylate oligomer (SAOC) have an influence on various especially, The properties of UV hardening cooling, such as chemical, abrasion resistance and weatherability, were greatly enhanced, the impact properties of coated polycarbonate substrate were improved compared with the noncoated that. The UV cured films containing 30 wt% SAOC obtained showed the best properties.

• Cross-Cultural Studies
• /
• v.45
• /
• pp.33-54
• /
• 2016

This study presents a comparative analysis of the calligrammic poetic dictions shown in the poems of the French poets Guillaume Apollinaire and Paul Eluard and in those of the Korean poet Lee Sang. They were adventurers in the avant-garde movement who used experimental techniques that led to futurism, expressionism, cubism, dadaism, and surrealism. They applied a typographic technique that combined pictorial arrangements of fonts, shapes of compositions and between lines, letters of the alphabet, mathematical symbols, and graphical elements, such as circles or lines, to make up a poem that also looked like a painting. Their works, valued as visual lyric poems, break up language and combine anti-poems. They rejected traditional poetic dictions or grammar, but developed a paratactic poem that freely uses letters and symbols. Their calligrammic poetic dictions arouse dynamic images like space extension. Lee Sang's calligrams seem like abstract paintings that apply geometric symbols like those used in technical drawings. As a result, crossing the boundaries between language and pictorial art by using experimental materials and techniques, their poems deconstruct the creative standards of rational and traditional poetic dictions, creating an adventurous, expressive technique. Their calligrammic, avant-garde poems introduced a new spirit of art into both French and Korean modern poetic literature.