• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.58-68
• /
• 2000

This paper proposes a sinusoidal modeling of polyphonic audio signals. Sinusoidal modeling which has been applied well to speech and monophonic signals cannot be applied directly to polyphonic signals because a window size for sinusoidal analysis cannot be determined over the entire signal. In addition, for high quality synthesized signal transient parts like attacks should be preserved which determines timbre of musical instrument. In this paper, a multiresolution filter bank is designed which splits the input signal into six octave-spaced subbands without aliasing and sinusoidal modeling is applied to each subband signal. To alleviate smearing of transients in sinusoidal modeling a dynamic segmentation method is applied to subbands which determines the analysis-synthesis frame size adaptively to fit time-frequency characteristics of the subband signal. The improved dynamic segmentation is proposed which shows better performance about transients and reduced computation. For various polyphonic audio signals the result of simulation shows the suggested sinusoidal modeling can model polyphonic audio signals without loss of perceptual quality.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.355-369
• /
• 2004

This paper presents a study of four finite element techniques that can be used to model slabon-beam highway bridges. The feasibility and correctness of each modeling technique are examined by applying them to a prestressed concrete I-beam bridge and a prestressed concrete box-beam bridge. Other issues related to bridge modeling such as torsional constant, support conditions, and quality control check are studied in detail and discussed in the paper. It is found that, under truck loading, the bending stress distribution in a beam section depends on the modeling technique being utilized. It is observed that the behavior of the bridge superstructure can be better represented when accounting for composite behavior between the supporting beams and slab.

• Journal of the Korean housing association
• /
• v.26 no.2
• /
• pp.67-79
• /
• 2015

As the Korean construction market in the apartment housing has changed to a housing consumer focused market, interest and importance on efficient use and management on existing buildings has increased rather than demand for new buildings. Interest of housing consumers on apartment house quality has increased in this market paradigm, and this spontaneously is connected to quality flaw related defect disputes and lawsuits that the importance of defect diagnosis has continuously increased. This defect diagnosis is directly connected to maintenance charges in defect dispute and lawsuit processes that rather objective and highly credible progress of duty is required. However, most defect diagnosis firms today that progress defect diagnosis are using different diagnosis methods and depend on the experience of experienced professionals that there is no standardized defect diagnosis process. Therefore, the purpose of this study is to provide common defect diagnosis process model for defect diagnosis firms utilizing the BPMN (Business Process Modeling Notation) modeling method. It is expected that this will contribute to professional and reliable task performances of concerned defect diagnosis workers. Furthermore, it is expected that design lawsuit damage will be substantially reduced by standardizing defect diagnosis processes.

• Advances in materials Research
• /
• v.1 no.2
• /
• pp.129-146
• /
• 2012

Polycrystalline diamond is an ideal material for parts with micro-holes and has been widely used as dies and cutting tools in automotive, aerospace and woodworking industries due to its superior wear and corrosion resistance. In this research paper, the modeling and simultaneous optimization of multiple performance characteristics such as material removal rate and surface roughness of polycrystalline diamond (PCD) with ultrasonic machining process has been presented. The fuzzy logic and taguchi's quality loss function has been used. In recent years, fuzzy logic has been used in manufacturing engineering for modeling and monitoring. Also the effect of controllable machining parameters like type of abrasive slurry, their size and concentration, nature of tool material and the power rating of the machine has been determined by applying the single objective and multi-objective optimization techniques. The analysis of results has been done using the MATLAB 7.5 software and results obtained are validated by conducting the confirmation experiments. The results show the considerable improvement in S/N ratio as compared to initial cutting conditions. The surface roughness of machined surface has been measured by using the Perthometer (M4Pi, Mahr Germany).

• Journal of the Korea Society for Simulation
• /
• v.12 no.3
• /
• pp.69-81
• /
• 2003

To manage a cluster of distributed server systems, a number of management aspects should be considered in terms of configuration management, fault management, performance management, and user management. System performance monitoring and reporting take an important role for performance and fault management. In this paper, we present distributed system architecture modeling of a performance monitoring and reporting tool. Modeling architecture of four subsystems are introduced: node agent, data collection, performance management & report, and DB schema. The performance-related information collected from distributed servers are categorized into performance counters, event data for system status changes, service quality, and system configuration data. In order to analyze those performance information, we use a number of ways to evaluate data corelation. By using some results from a real site of a company and from simulation of artificial workload, we show the example of performance collection and analysis. Since our report tool detects system fault or node component failure and analyzes performances through resource usage and service quality, we are able to provide information for server load balancing, in short term view, and the cause of system faults and decision for system scale-out and scale-up, in long term view.

• Journal of Information Technology Services
• /
• v.18 no.4
• /
• pp.135-149
• /
• 2019

Recently, there are many researches for extracting meaningful information from large amount of text data. Among various applications to extract information from text, topic modeling which express latent topics as a group of keywords is mainly used. Topic modeling presents several topic keywords by term/topic weight and the quality of those keywords are usually evaluated through coherence which implies the similarity of those keywords. However, the topic quality evaluation method based only on the similarity of keywords has its limitations because it is difficult to describe the content of a topic accurately enough with just a set of similar words. In this research, therefore, we propose topic keywords reorganizing method to improve the identifiability of topics. To reorganize topic keywords, each document first needs to be labeled with one representative topic which can be extracted from traditional topic modeling. After that, classification rules for classifying each document into a corresponding label are generated, and new topic keywords are extracted based on the classification rules. To evaluated the performance our method, we performed an experiment on 1,000 news articles. From the experiment, we confirmed that the keywords extracted from our proposed method have better identifiability than traditional topic keywords.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.30-38
• /
• 2015

IT security service provides customers with the capability of protecting the networked information asset and infrastructures, and the scope of security service is expanding from a technology-intensive task to a comprehensive protection system for IT environment. To improve the quality of this service, a research model which help assess the quality is required. Several research models have been proposed and used in various service areas, but few cases are found for IT security service. In this work, a research model for the IT security quality has been proposed, based on research models such as SERVQUAL and E-S-QUAL. With the proposed model, factors which affect the service quality and the best quality measure have been identified. And the feasibility of using quantitative measures for quality has been examined. For analysis, structural equation modeling and various statistical methods such as principal component analysis were used. The result shows that satisfaction is the most significant measure affected by the proposed quality factors. Two quality factors, fulfillment and empathy, are the main determinants of the service quality. This leads to a strategy of quality improvement based on factors of emotion and perception, not of technology. The quantitative measures are considered as promising alternative measures, when combined with other measures. In order to design reliable quantitative measures, more work should be done on target processing time and users' expectation. It is hoped that work of this research will provide efficient tools and methods to improve the quality of IT security service and help future research works for other IT service areas.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.6
• /
• pp.827-841
• /
• 1999

The air quality simulation models in wide use for air quality impact assessmetns are reviewed. After an intensive survey and comparative study upon the environmental impact assessment reports submitted to Ministry of Environment during 1990~1998, we could identify the major common problems with the air quality impact assessment procedures. Several remedies are presented here, including use of the screening models applicable to the complex terrain.

• Research in Mathematical Education
• /
• v.26 no.3
• /
• pp.253-270
• /
• 2023

This study aims to investigate the extent to which Korean high school textbooks incorporate opportunities for students to engage in the mathematical modeling process through tasks related to exponential and logarithmic functions. The tasks in three textbooks were analyzed based on the actions required for each stage in the mathematical modeling process, which includes identifying essential variables, formulating models, performing operations, interpreting results, and validating the outcomes. The study identified 324 units across the three textbooks, and the reliability coefficient was 0.869, indicating a high level of agreement in the coding process. The analysis revealed that the distribution of tasks requiring engagement in each of the five stages was similar in all three textbooks, reflecting the 2015 revised curriculum and national curriculum system. Among the 324 analyzed tasks, the highest proportion of the units required performing operations found in the mathematical modeling process. The findings suggest a need to include high-quality tasks that allow students to experience the entire process of mathematical modeling and to acknowledge the limitations of textbooks in providing appropriate opportunities for mathematical modeling with a heavy emphasis on performing operations. These results provide implications for the development of mathematical modeling activities and the reconstruction of textbook tasks in school mathematics, emphasizing the need to enhance opportunities for students to engage in mathematical modeling tasks and for teachers to provide support for students in the tasks.

• Journal of Korean Society for Quality Management
• /
• v.23 no.3
• /
• pp.57-68
• /
• 1995

In this paper, we consider possibility that the multiple errors occur in each testing stage. At present, software reliability modeling is considered as a part of software reliability quality assurance in software engineering. However they dealt with the software growth model for the single error debugging at each testing stage until now. Hence it is necessary to study software reliability with multiple errors debugging. Therefore we propose software reliability growth modeling and estimate the parameters in the proposed software reliability growth model for the multiple errors debugging at each testing stage.