• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.727-731
• /
• 2000

This paper presents a new practical autopilot design approach to acceleration control for tail-controlled STT(Skid-to-Turn) missiles. The approach is novel in that the proposed parametric affine missile model adopts acceleration as th controlled output and considers the couplings between the forces as well as the moments and control fin deflections. The aerodynamic coefficients in the proposed model are expressed in a closed form with fittable parameters over the whole operating range. The parameters are fitted from aerodynamic coefficient look-up tables by the function approximation technique which is based on the combination of local parametric models through curve fitting using the corresponding influence functions. In this paper in order to employ the results of parametric affine modeling in the autopilot controller design we derived a parametric affine missile model and designed a feedback linearizing controller for the obtained model. Stability analysis for the overall closed loop sys-tem is provided considering the uncertainties arising from approximation errors. the validity of the proposed modeling and control approach is demonstrated through simulations for an STT missile.

• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.55-62
• /
• 2008

In the construction field, there has been a recent and unprecedented increase in the research and development of modernized Korean traditional buildings, This is because, in today's modern society, the basic needs for survival have already been met and more people are now recognizing the importance of the identity of our unique culture. It is therefore timeous to consider not just how to preserve and use Korean traditional buildings, but also how to develop them into more industrialized and modernized buildings in a practical way. Recently, the direction has been focused on the industrialization of modernized Korean traditional buildings, including their evolution, and development, as well as on the numerous cases where construction has been delayed. In order to industrialize modernized Korean traditional buildings, we need to standardize their form and actively introduce current IT (Information Technology). In order to achieve this, it is absolutely necessary to change from the CADD (Computer Aided Design and Drafting) system to the BIM (Building Information Modeling) system, which reflects the concept of Virtual Architecture. Therefore, the aim of this study is to discuss the possibilities of using BIM system for industrialization of modernized Korean traditional buildings, extend the foundation of the form library, and develop an intelligent modeler. It is also necessary to exemplify a case model for modernized Korean traditional buildings to which BIM is applied.

• Journal of computational fluids engineering
• /
• v.8 no.2
• /
• pp.42-48
• /
• 2003

The issues associated with the application of CFD for ship design are addressed. Doubtlessly at the moment, CFD tools are very useful in evaluating hull forms prior to traditional towing tank tests. However, time-consuming pre-processing is an obstacle in the daily application of CFD tools to improve hull forms. The accuracy of computational modeling without sacrificing the usability of CFD system is also to be assessed. The wave generation is still predicted by using potential panel methods, while velocity profiles entering into propeller plane is solved using turbulent flow solvers. The choice of turbulence model is a key to predict nominal wake distribution within acceptable accuracy. The experimental data for CFD validation are invaluable to improve physical and numerical modeling. Other applications of CFD for ship design than hull form improvement are also given. It is certain that CFD can be a cost-effective tool for the design of new and better ships.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.4
• /
• pp.15-23
• /
• 2002

With the development of a laser scanner of high precision and increased speed, reverse engineering becomes a key approach to reduce the time for the development of new products. But the modeling process is not so automated enough until now. Modeling in real workshops is usually performed by the experienced operators and it requires a skillful technique to get the resultant surface of high quality and precision. In this paper, a systematic solution is proposed to automate the free-form surface generation from the measured point data. Compatibility is imposed to the measured point data during input curve generation. And the compatibility of cross-sectional curve is also considered for the loft surface generation. The data in each step is produced in IGES file format to make an easy interface to other CAD/CAM software without any further data manipulation.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.5-8
• /
• 2002

The issues associated with the application of CFD for ship design are addressed. It is quite certain that the CFD tools are very useful in evaluating hull forms a prior to traditional towing tank tests. However, the time-consuming pre-processing is an obstacle in the daily application of CFD tools to improve hull forms. The accuracy of computational modeling without sacrificing the usability of CFD system is also to be assessed. The wave generation is still predicted by using potential panel methods, while velocity profiles entering into propeller plane is solved using turbulent flow solvers. The choice of turbulence model is a key to predict nominal wake distribution within acceptable accuracy. The experimental data for CFD validation are invaluable to improve physical and numerical modeling. Other applications of CFD for ship design than hull form improvement are also given. It is certain that CFD can be a cost-effective tool for the design of new and better ships.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.966-974
• /
• 1999

This paper introduces modeling and its modal analysis procedure for exact and closed form solution of in-plane vibrations of general Timoshenko frame structures using exact dynamic element method(EDEM). The derivation procedure of the exact system dynamic matrices for Timoshenko beam frames is described. A new modal analysis procedure is also proposed since the conventional modal analysis schemes are not adequate for the proposed, exact system dynamic matrix. The proposed method provides exact modal parameters as well as all kinds of closed form solutions for general frame structures. Two numerical examples are presented for validating and illustrating the proposed method. The numerical study proves that the proposed method is useful for dynamic analysis of frame structures.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.17-24
• /
• 1998

Noweays, The flow of international relations have to competition with product of each nation, a means of this competitoveness is developmennt of goods based on nation culture. That is in need to development of design have color of our country make sure of original design. Now we need a positive opposed to wants of consumers with expaneded market, so as to need of develogment of distinctive design. And then, this stuey have purpose analory of distinctive design as a ilustrate to case of traditional design with on a conjoint analysis, look into the modeling method and meaning of traditional design. At first, it setting up the base of design development, as a present into a investigate to extract course of shape's element for design distinction. And look around about the developing case of domestic company and modeling method, a pattern of traditional design development, As on of distinction's way has doing conjoint analysis for abstract to character of traditional form and have devdloping to product with a present expression elements and design concept for a basis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.27-34
• /
• 1993

Precast large panel structures behave differently form frame and monolithic wall structures under external loads, because of the distinct planes of weakness in the horizontal and vertical joints between panels. These joints may slide and open during shaking, producing large localized changes in the bending and shear stiffness of individual walls. The structural behavior of large precast panel buildings depends on the relative strength and stiffness of the panels and joints. Special modeling are thus required for the analysis of precast panel connections. This study suggests a new analytical modeling and method to obtain the rational estimation of discontinuity and slip movements form the connections of precast large panel structures .

• Journal of the Korea Society for Simulation
• /
• v.11 no.2
• /
• pp.55-66
• /
• 2002

VHDL has been. widely used in modeling and simulation of hardware designs. However, complex relationship between components of the designs makes the VHDL modeling problem very difficult. Furthermore, after the initial creation of VHDL models, they evolve into many versions over their lifetime. To cope with such difficulties, this paper proposes a new methodology for the management of VHDL models supporting versions. Its conceptual bases are system entity structure and relational database. Within the methodology, a family of hierarchical structures of a design is organized in the form of VHDL model structure. It is, in turn, represented in the form of relational tables. Once the model structure is built in such a way, a specific simulation model which meets design objective is pruned from the model structure. The details of VHDL codes are systematically synthesized by combining it with the primitive models in a model base. These algorithms are also defined in terms of relational algebraic operations.

• Explosives and Blasting
• /
• v.23 no.1
• /
• pp.47-54
• /
• 2005

An explosion modeling technique was developed by using the spherical discrete element code, $PFC^{3D}$, which can be used to model the dynamic stress wave propagation phenomenon. The modeling technique is simply based on an idea that the explosion pressure should be applied to a $PFC^{3D}$ particle assembly not in the form of an external force (body force), but in the form of a contact force (surface force). A test blast was conducted for a RC column, whose dimension was $600\times300\times1800$ in millimeters. The initial velocities of the surface movements were measured to be in the range of $14\~18\;m/s$ with the initiation times of $1.5\~2.0m$. Then the blasting procedure was simulated by using the modeling technique. The particle assembly representing the concrete was made of cement mortar and coarse aggregates, whose mirco-properties were obtained from the calibration processes. As a result, the modeling technique developed in this study made it possible for the burden to move with the velocity of $17\~24\;m/s$, which are slightly higher values compared to those of the test blast.