• Structural Engineering and Mechanics
• /
• v.10 no.6
• /
• pp.603-619
• /
• 2000

Analysis of a framed structure for vertical vibration requires a lot of computational efforts because large number of degrees of freedom are generally involved in the dynamic responses. This paper presents an efficient modeling technique for vertical vibration utilizing substructuring technique and super elements. To simplify the modeling procedure each floor in a structure is modeled as a substructure. Only the vertical translational degrees of freedom are selected as master degrees of freedom in the inside of each substructure. At the substructure-column interface, horizontal and rotational degrees of freedom are also included considering the compatibility condition of slabs and columns. For further simplification, the repeated parts in a substructure are modeled as super elements, which reduces computation time required for the construction of system matrices in a substructure. Finally, the Guyan reduction technique is applied to enhance the efficiency of dynamic analysis. In numerical examples, the efficiency and accuracy of the proposed method are demonstrated by comparing the response time histories and the analysis time.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.127-138
• /
• 1997

In this study, a new technique is presented, by which one can define ship hull form with full fairness from the input data of lines. For curve modeling, the de Casteljau Algorithm and Bezier control points are used to express free curves and to establish the unified curve modeling technique which enables one to convert non-uniform B-spline (NUB) curve or cubic spline curve into composite Bezier curves. For surface modeling, the mesh curve net which is required to define surface of ship hull form is interpolated by the method of the unified curve modeling, and the boundary curve segments of Gregory surface patches are generated by remeshing(rearranging) the given mesh curve net. From these boundary information, composite Gregory surfaces of good quality in fairness can be formulated.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.546-551
• /
• 2001

This paper considers the design technique of the real-time control algorithm to implement the electronic interlocking system which is the most important station control system in railway signal field. The proposed technique consists of the structure design and the detail design which are based on the ROOM(Real-Time Object-Oriented Modeling) This proposed technique is applied to the typical station model in order to prove the validity as verifying the performance of the modeled station.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.168-176
• /
• 1998

This paper deals with an application on the mould machining of air intake hose product by using 3-dimensional parametric modeling techniques. The detailed domain is the 3-dimensional product with similar shapes and different sizes which needs too much working time for preparation of modeling or machining due to making a trial and errors repeatedly. Decision making rules for selection of modeling order and technique, and for calculation of cutting conditions, and for determination of sequence and method concerning machining operations are required by interview of expert engineers in the field. The developed expert system of modeling and machining is programmed by using a user programming language under the CAD/CAM software of the Personal Designer. The developed system that aids a mould engineer who is working in the modeling and machining section which deal with air intake hose product provides strong and useful capabilities.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.239-244
• /
• 2009

This paper suggests a precision positioning control technique of a precision positioning stage with coupling effects. The precision positioning stage is supported by four flexible spring hinges and driven by two piezoelectric actuators. The dynamic characteristics of the precision positioning stage is modeled and identified by the FEM analysis. The dynamic characteristics of the stage are also identified by the frequency domain modeling technique based on the experimental data. Reliability of two modeling methods is examined by comparing the numerically and experimentally produced responses of the stage. This paper proposes a sliding mode control technique with integrator to improve the tracking ability of the precision positioning stage to the complex input signal using. To demonstrate the effectiveness of the proposed modeling schemes and control algorithm, experiment validations are performed.

• IE interfaces
• /
• v.12 no.1
• /
• pp.102-113
• /
• 1999

BOM(Bill of Material) is a description of parts, assemblies and raw materials that comprise a product structure. In manufacturing companies that produce various products with short life cycles, it is very important to manage to BOM of products with various options and versions efficiently. This paper describes an effective modeling and implementing technique of Generic BOM Management System(GBMS) for management of number of variant products. In this paper, OMT(Object Modeling Technique) was used to model a generic BOM and Object-Relational Database Management System(ORDBMS) was used to implement the GBMS database. In order to prove the effectiveness of proposed methodology, a case that assembles computer with various options was studied.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.227-232
• /
• 1995

This paper presents a digital modeling technique for the distributed parameter system. The basic idea of the proposed technique is to discretize a continuous system with respect to the spatial coordinate using the approximate methods such as bilinear method and backward difference method. The response of the discretized system is analyzed by Laplace transform and Z transform. The computational result of the proposed technique in a torsional shaft is compared with the exact solution and the result of the finite element method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.91-101
• /
• 2005

In this paper, a technique for the quantitative analysis of the noise jamming effect is proposed. This technique based upon the mathematical modeling for noise jammers and the probability theory for random processes analyses the jamming effect by means of the modeling of the relationship among jammer, radar variables and radar detection probability under noise jamming environment. Computer simulation results show that the proposed technique not only makes the quantitative analysis of the jamming effect possible, but also provides the basis for quantitative analysis of the electronic warfare environment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.2
• /
• pp.225-234
• /
• 2018

A Multibeam Echo Sounder (MBES) is commonly used for rapid seafloor mapping. We herein present a time-domain integrated system simulation technique for MBES development. The Modeling and Simulation (M&S) modules consist of four parts: sensor array signal transmission, propagation and backscattering modeling in the ocean environment, beamforming of the received signals, and image processing. Also, the simulation employs a ray-theory-based algorithm to correct the reconstructed bathymetry, which has errors due to the refraction caused by the vertical sound velocity profile. The developed M&S technique enables design parameter verification and system parameter optimization for MBES. The framework of this technique can also be potentially used to characterize the seabed properties. Finally, typical seafloor images are presented and discussed.

• The KIPS Transactions:PartD
• /
• v.16D no.3
• /
• pp.381-394
• /
• 2009

As a technique to enhance reusability for the created artifacts in software modeling process, the model driven method such like MDA has been applied. Unfortunately, the hierarchical and systematic MDA based development technique using UML is poor yet. This causes the problem that the MDA modeling with high consistency and reusability based on MDA metamodel is not being realized. To solve this problem, this paper proposes a MDA (PIM/PSM) component modeling technique using 2+1 view integrated metamodel. At first, the meta-architecture view model which can represents development process view and MVC view is defined. Then, the hierarchical integrated metamodels per view are addressed separately for modeling process and MVC at metamodel level on the hierarchy of the defined meta-architecture view model. These metamodels are defined hierarchically by layering the modeling elements in PIM and PSM pattern for UML models and GUI models. Appling the proposed metamodel to an ISMS application system, it is shown as a component modeling case study based on MDA. Through this approach, we are able to perform a component model with consistency and hierarchy corresponding to development process and MVC way. Accordingly, this may improve more independence and reusability of model.