• 제목/요약/키워드: Model-ship correlation

검색결과 66건 처리시간 0.021초

선박 조종성능 연구를 위한 선체형상 파라메터와 유체력미계수와의 관계분석 (The study on ship's manoeuvrability through the analysis of the relationship of between hydrodynamic coefficient and ship hull parameter)

  • 임남균;권석암;양희준;김세은
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.103-107
    • /
    • 2005
  • 연구는 선박 설계 초기단계에서 선형 변화에 따른 선박 조종성능 추정에 관한 내용을 다루었다. 선박제원을 대표하는 파라메터 그리고 선미형상의 변화를 민감하게 반영할 수 있는 새로운 파라메터를 선정하는 작업을 수행하였다. 이렇게 선정된 파라메터와 유체력 미계수와 상관관계를 알아보기 위하여 구속모형 실험을 수행하였다. 그 결과 기존의 기본적인 선박제원 중 상관도가 높은 파라메터를 가려낼 수 있었다. 또한 선미형상의 새로운 파라메터와 조종성능과의 상관도를 추정할 수 있었다. 이를 활용하면,초기 선형 설계시 선형변화 및 수정에 따른 조종성능 추정에 활용할 수 있을 것으로 판단된다.

  • PDF

Development of an Optimal Hull Form with Minimum Resistance in Still Water

  • Choi Hee-Jong;Kim Mun-Chan;Chun Ho-Hwan
    • Journal of Ship and Ocean Technology
    • /
    • 제9권3호
    • /
    • pp.1-13
    • /
    • 2005
  • A design procedure for a ship with minimum total resistance has been developed using a numerical optimization method called SQP (Sequential Quadratic Programming) to search for optimized hull form and CFD(Computational Fluid Dynamics) technique. The friction resistance is estimated using the ITTC 1957 model-ship correlation line formula and the wave making resistance is evaluated using a potential-flow panel method based on Rankine sources with nonlinear free surface boundary conditions. The geometry of hull surface is represented and modified using B-spline surface patches during the optimization process. Using the Series 60 hull ($C_B$ =0.60) as a base hull, the optimization procedure is applied to obtain an optimal hull that produces the minimum total resistance for the given constraints. To verify the validity of the result, the original model and the optimized model obtained by the optimization process have been built and tested in a towing tank. It is shown that the optimal hull obtained around $13\%$ reduction in the total resistance and around $40\%$ reduction in the residual resistance at a speed tested compared with that of the original one, demonstrating that the present optimization tool can be effectively used for efficient hull form designs.

앙상블 기법을 이용한 선박 메인엔진 빅데이터의 이상치 탐지 (Outlier detection of main engine data of a ship using ensemble method)

  • 김동현;이지환;이상봉;정봉규
    • 수산해양기술연구
    • /
    • 제56권4호
    • /
    • pp.384-394
    • /
    • 2020
  • This paper proposes an outlier detection model based on machine learning that can diagnose the presence or absence of major engine parts through unsupervised learning analysis of main engine big data of a ship. Engine big data of the ship was collected for more than seven months, and expert knowledge and correlation analysis were performed to select features that are closely related to the operation of the main engine. For unsupervised learning analysis, ensemble model wherein many predictive models are strategically combined to increase the model performance, is used for anomaly detection. As a result, the proposed model successfully detected the anomalous engine status from the normal status. To validate our approach, clustering analysis was conducted to find out the different patterns of anomalies the anomalous point. By examining distribution of each cluster, we could successfully find the patterns of anomalies.

주성분 분석을 통한 선박 조종 중 4자유도 동역학 특성 연구 (A Study on 4DOF Ship Dynamics in Maneuver by Principal Component Analysis)

  • 김동환;김민창;이승범;서정화
    • 대한조선학회논문집
    • /
    • 제61권1호
    • /
    • pp.29-43
    • /
    • 2024
  • The present study concerns a feasibility study for applying principal component analysis to ship dynamics in maneuver. Using the four degrees of freedom standard modular model for ship dynamics maneuver simulations of large angle zigzag tests with rudder deflection angle variations are conducted. The datasets of ship motion, hydrodynamic force, and moment during the maneuver are acquired to identify the principal modes. The covariance matrix of obtained ship dynamics variables shows a strong linear correlation between the motion, hydrodynamic force, and moment, except the surge force. Four eigenvectors of the covariance matrix are selected as the principal modes of ship dynamics. Using the principal modes, ship motion in turning circle and zigzag tests is reconstructed, showing good agreement with the original data.

모형선과 실선의 상관관계 추정을 위한 등가평판의 수치해석 및 적용 (Numerical simulation of flow around an equivalent plate for model-ship correlation)

  • 김영민;박미연;이희범
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제1회(2012년)
    • /
    • pp.109-112
    • /
    • 2012
  • 선박의 저항을 추정하는 일은 선박설계에 있어 가장 기본적인 작업이다. 그러나 선박의 크기는 매우 크기 때문에 일반적으로 모형선 실험을 통해 선박의 저항을 추정한다. 이 때, 모형선 실험은 Froude 수를 기준으로 수행하게 되는데 이 때문에 모형선과 실선의 Reynolds 수가 서로 다른 영역에 놓이게 된다. 따라서 모형선 실험에서 얻어진 데이터를 실선에 그대로 적용할 수 없기 때문에 모형선-실선 저항추정법을 사용하게 된다. 본 연구에서는 이러한 모형선-실선 저항추정법에 사용되고 있는 2 차원 외삽법을 살펴보고 이 기법에 사용되고 있는 ITTC 마찰저항곡선을 등가평판 주위의 유동장 해석결과와 비교하였으며 ITTC 마찰저항곡선에 대해 고찰하였다.

  • PDF

자유항주모형시험과 회귀분석을 통한 선체 동역학 모델의 개발 (Development of Ship Dynamics Model by Free-Running Model Tests and Regression)

  • 김기원;김호용;최성은;나기인;이혁;서정화
    • 대한조선학회논문집
    • /
    • 제59권3호
    • /
    • pp.173-182
    • /
    • 2022
  • The present study suggests a procedure of establishing a ship dynamics modeling by regression of free-running model test results. The hydrodynamic force and moment of the whole model ship is derived from the low-pass filtered acceleration in the turning circle and zigzag maneuver tests. Force and moment of the propeller and rudder are separated from that of the whole ship to acquire the hull force and moment terms, based on the principles of the component model. The low-pass filter frequency is verified in prior to dynamics modeling, to find the threshold frequency of 2.5 Hz. The dynamics modeling of the hull is compared with the component modeling by captive model tests. Because of strong correlation between sway velocity, yaw angular velocity, and heel angle, each maneuvering coefficient is not able to be validated, but the whole modeling shows good agreement with the captive model tests.

해상교통류 시뮬레이션에 의한 해상교통안전관리평가에 관한 연구 (A Study on Assessment of Vessel Traffic Safety Management by Marine Traffic Flow Simulation)

  • Park Young- Soo;Jong Jae-Yong;Inoue Kinzo
    • 한국시뮬레이션학회논문지
    • /
    • 제11권4호
    • /
    • pp.43-55
    • /
    • 2002
  • Vessel traffic safety management means the managerial technical measures for improving the marine traffic safety in general terms. The main flow of vessel traffic safety management is that: 1) Traffic Survey, 2) Replay by Marine Traffic Flow Simulation, 3) Quantitative Assessment, 4) Policy Alternatives, 5) Prediction·Verification. In the management of vessel traffic safety, it is most important to establish assessment models that can numerically estimate the current safety level and quantitatively predict the correlation between the measures to be taken and the improvement of safety and the reduction of ship handling difficulties imposed on mariners. In this paper, the replay model for traffic flow simulation was made using marine traffic survey data, and the present traffic situation became replay in the computer. An attempt was made to rate the current safety of ports and waterways by applying the Environmental Stress model. And, as a countermeasure for traffic management, by taking of, the promotion of total traffic congestion in early morning rush hour, the correlation between traffic control rate and the reduction in ship handling difficulties imposed on mariners was predicted quantitatively.

  • PDF

Relation between P-D value of Autopilot and Transfer Distance under Wind Pressure

  • Seong, Yu-Chang
    • 한국항해항만학회지
    • /
    • 제32권4호
    • /
    • pp.271-277
    • /
    • 2008
  • When performing steering by an autopilot (automatic steering gear), a sensitivity adjustment is mainly determined by P value and D value. These values differ in the optimal combination by model of ship and external forces. This research was carried out simulation case studies and examined movement of Pure Car Carrier, which easily received ship by wind pressure influence in low speed We investigated the relation of horizontal migration(transfer) of ship's body and P-D value. Based on it, four parameters of P-D at approaching berth could be suggested Hence there were suggestions of parameters; Distance to maximum lee point, Time to maximum lee point, Time to return to original course and Time to 300th second. The correlation of these parameters and P-D value were also considered. As a result, we think that this index, like formulated P-D, leads to an easy and safe navigation by utilizing these indices.

A New Sound Reception System using a Symmetrical Microphone Array and its Numerical Simulation

  • Choi Jae-Woong;Kim Ki-Jung
    • Journal of Ship and Ocean Technology
    • /
    • 제8권3호
    • /
    • pp.18-25
    • /
    • 2004
  • Sound reception system is required to detect the sound and the quadrantal direction of the other ship's horn sound, to overcome the effects of enclosed wall for navigation space, functioning as a sound barrier. However, the realized systems can only provide quadrantal information of the other ship. This paper presents a new arrangement of microphones, having geometrically symmetric deployment with the same distances between sensors and the same angles between adjacent sensors with respect to the geometrical center. The sound pressures received at microphones are transformed into the related envelope signals by applying Hilbert transform. The time delays between microphones are estimated by the correlation functions between the derived envelope signals. This envelope base processing mitigates the noises related to the reflection by ship and sea surface. Then, the directional information is easily defined by using the estimated time delays. The suggested method is verified by the generated signals using boundary element method for a small ship model with sea surface wave. The estimated direction is quite similar to the true one and therefore the proposed approach can be used as an efficient sound reception system.

저항, 자항시험에 있어서의 불확실성 해석 (Uncertainty Analysis for the Resistance and Self-Propulsion Test of Ship Model)

  • 박동우;김민규;강선형
    • 대한조선학회논문집
    • /
    • 제40권5호
    • /
    • pp.1-9
    • /
    • 2003
  • To predict the powering performance of full scale ships from the towing tank tests, resistance, propeller open water and self-propulsion tests are conducted. Model tests inevitably include the experimental error defined as the sum of two types of uncertainties, bias and precision errors. The induced errors in each element of model test are propagated through various routes and correlated with one another. The correlation coefficients are very important in the uncertainty analysis. The coefficient gives a direction(increase or decrease) for a value of error in individual elements. If the coefficient is not used accurately, the error bounds of the individual elements are overestimated or underestimated. In this study, the new methodology is applied to the uncertainty analysis of HMRI's towing tank tests, thus error bounds of each element is suggested and verified by several repetitive experiments.