• Title/Summary/Keyword: Model-based evaluation

Search Result 5,817, Processing Time 0.033 seconds

Suggestion on Screening Concept of Radionuclides to be Considered for the Radiological Safety Assessment of the Domestic KBS-3 Type Geological Disposal Facility of High-level Radioactive Waste(HLW) (국내 KBS-3 방식 고준위방사성폐기물 심층처분시설 방사선학적 안전성 평가 대상 방사성핵종 목록 선정개념(안) 제언)

  • Sukhoon Kim;Donghyun Lee;Dong-Keuk Park
    • Journal of Radiation Industry
    • /
    • v.17 no.1
    • /
    • pp.45-59
    • /
    • 2023
  • The transport calculation for a wide variety of radionuclides contained in high-level radioactive waste, especially spent nuclear fuel, is computationally difficult, and input data collection for this also take a considerable amount of time. Accordingly, considering limited resources, it is possible to reduce the calculation time while minimizing impact on accuracy by including only radionuclides important to calculation result through applying some criteria among potential radiation source terms that may release into environment. In this paper, therefore, we reviewed and analyzed the screening process performed to select radionuclides to be considered in the safety assessment for the KBS-3 type repository in Sweden and Finland. In both countries, it was confirmed that a list of radionuclides was selected by comprehensively considering screening criteria such as radioactivity inventory, half-life, radiotoxicity, risk quotient, and transport properties, and etc. A comparison of radionuclides included in the radiological safety assessment in both countries suggests that most of nuclides are considered in common, and a few nuclides considered only in one country are due to differences in decay chain treatment or spent fuel types. As of now, since most of information on the disposal facility in Korea has not been determined, it is necessary to comprehensively model release and transport of all radionuclides considered in Sweden and Finland when performing the radiological safety assessment. Based on these results, we derived the screening concept of selecting a list of radionuclides to be considered in the radiological safety assessment for the domestic KBS-3 type geological disposal facility, and this result is expected to be used as technical basis for confirming conformity with the safety objective. In a more detailed evaluation reflecting domestic characteristics in the future, it would be desirable to consider only radionuclides selected in accordance with the screening procedure. However, further research should be conducted to determine the quantitative limit for each criteria.

Three-dimensional accuracy evaluation of post-curing of artificial teeth, denture bases, and denture base monoblocks manufactured by digital light processing (광중합형 프린터로 제작한 인공치아, 의치상, 모노블럭 총의치의 후경화에 따른 3차원 정확성 평가)

  • Dong-Yeon Kim;Cheon-seung Yang;Gwang-Young Lee
    • Journal of Technologic Dentistry
    • /
    • v.46 no.3
    • /
    • pp.84-92
    • /
    • 2024
  • Purpose: To evaluate the effect of post-curing on the three-dimensional (3D) accuracy of artificial teeth, denture bases, and denture base monoblock manufactured using digital light processing (DLP) technology. Methods: Using an edentulous model, a 3D design was made for complete dentures. Three groups were printed by DLP: artificial teeth, denture bases, and denture base monoblock. The models were scanned, subjected to post-curing, and scanned again. Three-dimensional analysis was performed based on the post-treatment differences among the three groups. Statistical analysis was performed using SPSS Statistics ver. 22.0 (IBM), and the Mann-Whitney U-test and Kruskal-Wallis test were employed as nonparametric tests. Results: The complete denture monoblock (CM) and complete denture artificial teeth (CA) groups showed the lowest and highest errors at 15.13 and 23.37 ㎛, respectively. The groups did not show significant differences (p>0.05). In the significance test among the three groups, no significance was found in the CA group; however, significant differences were found between the complete denture base (CB) and CM groups. In addition, the three groups showed significant differences (p<0.05). Conclusion: Although deformation may occur during the post-curing process, it is within the clinically acceptable range. Future comparative studies using different 3D printers and searching for ways to minimize errors through optimization of the post-curing process are warranted.

A proposed model of limit equilibrium analysis for stability assessment of underground structure in liquefied ground during earthquakes (지진 시 액상화된 지반 내 지중 구조물의 안정성 평가를 위한 한계평형해석 모델 제안)

  • Ju-Young Oh;Jaehwan Lee;Seokbue Chang
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.26 no.5
    • /
    • pp.435-448
    • /
    • 2024
  • Liquefaction of the ground caused by earthquakes results in significant damage to underground structures such as tunnels, pipelines, manholes, and underground tanks. The uplift of underground structures due to liquefaction has been identified as a major cause of this damage. However, current design practices have not adequately considered the upward displacement of underground structures. This paper proposes an analytical solution based on the limit equilibrium method for cut-and-cover tunnels. Using this solution, a sensitivity analysis was performed on soil cover height, liquefaction depth, ground improvement, and ledge. It was confirmed that the contribution of each factor to the safety factor can be reasonably derived through changes in the safety factor. Although there are still many assumptions and uncertainties that need to be reviewed for their appropriateness, a conservative approach appears to mitigate a significant portion of these uncertainties. This study is meaningful as a stability evaluation method considering the uplift behavior characteristics of underground structures.

Designing Gamification and Analyzing Performance Indicators to Enhance Academic Library Services (대학도서관 서비스 효과 증진을 위한 게이미피케이션 설계 및 성과 지표 분석)

  • Hyeyoung Kim;Hanseul Lee
    • Journal of Korean Library and Information Science Society
    • /
    • v.55 no.3
    • /
    • pp.167-192
    • /
    • 2024
  • Gamification is an effective strategy to enhance the quality of academic library services by encouraging student engagement and participation. This study developed a design framework for the effective implementation of gamification in academic libraries. To this end, a framework based on the information literacy model was developed through a literature review, content analysis of Korean and international case studies, and in-depth interviews with five librarians of academic libraries. The framework outlines the design elements and game mechanisms to be considered at each stage of the process, including task definition, information search, collection, utilization, and integration. Additionally, performance indicators were established to measure the cognitive, emotional, and social impacts of gamification. This study is expected to serve as a foundation for the systematic implementation and evaluation of gamification in academic libraries, ultimately contributing to increased user participation and enhanced learning motivation.

Evaluation of Robust Performance of Fuzzy Supervisory Control Technique (퍼지관리제어기법의 강인성능평가)

  • Ok, Seung-Yong;Park, Kwan-Soon;Koh, Hyun-Moo
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.9 no.5 s.45
    • /
    • pp.41-52
    • /
    • 2005
  • Using the variable control gain scheme on the basis of fuzzy-based decision-making process, Fuzzy supervisory control (FSC) technique exhibits better control performance than linear control technique with one static control gain. This paper demonstrates the effectiveness of the FSC technique by evaluating the robust performance of the FSC technique under the presence of uncertainties in the models and the excitations. Robust performance of the FSC system is compared with that of optimally designed LQG control system for the benchmark cable-stayed bridge presented by Dyke et al. Parameter studies on the robust performance evaluation are carried out by varying the stiffness of the bridge model as well as the magnitudes of several earthquakes with different frequency contents. From the comparative study of two control systems, FSC system shows the enhanced control performance against various magnitudes of several earthquakes while maintaining lower level of power required for controlling the bridge response. Especially, FSC system clearly guarantees the improved robust performance of the control system with stable reduction effects on the seismic responses and slight increases in total power and stroke for the control system, while LQG control system exhibits poor robust performance.

National Genetic Evaluation (System) of Hanwoo (Korean Native Cattle)

  • Park, B.;Choi, T.;Kim, S.;Oh, S.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.26 no.2
    • /
    • pp.151-156
    • /
    • 2013
  • Hanwoo (Also known as Korean native cattle; Bos taurus coreanae) have been used for transportation and farming for a long time in South Korea. It has been about 30 yrs since Hanwoo improvement began in earnest as beef cattle for meat yield. The purpose of this study was to determine the trend of improvement as well as to estimate genetic parameters of the traits being used for seedstock selection based on the data collected from the past. Hanwoo proven bulls in South Korea are currently selected through performance and progeny tests. National Hanwoo genetic evaluations are implemented with yearling weight (YW), carcass weight (CW), eye muscle area (EMA), backfat thickness (BF) and marbling score (MS). Yearling weights and MS are used for selecting young bulls, and EMA, BF, and MS are used for selecting proven bulls. One individual per testing room was used for performance tests, and five individuals per room for progeny tests. Individuals tested were not allowed to graze pasture, but there was enough space for them to move around in the testing room. Feeds including roughages and minerals were fed ad libitum, and concentrates were provided at the rate of about 1.8% of individual weight. Overall means of the traits were $352.8{\pm}38.56$ kg, $335.09{\pm}44.61$ kg, $77.85{\pm}8.838\;cm^2$, $8.6{\pm}3.7$ mm and $3.293{\pm}1.648$ for YW, CW, EMA, BF and MS. Heritabilities estimated in this study were 0.30, 0.30, 0.42, 0.50 and 0.63 in YW, CW, EMA, BF and MS, respectively, which are similar to results from previous research. Yearling weight was 315.54 kg in 1998, and had increased to 355.06 kg in 2011, resulting in about 40 kg of improvement over 13 yrs. YW and CW have improved remarkably over the past 15 yrs. Breeding values between 1996 and 2000 decreased or did not change much, but have moved in a desirable direction since 2001. These improvements correspond with the substantial increase in use of animal models since the late 1990s in Korea. Hanwoo testing programs have practically contributed to the improvement in aspects of quality and quantity. In sum, the current selection system is good enough to accommodate circumstances where fewer sires are used on many more cows. Although progeny tests take longer and cost more, they seem to be appropriate under the circumstances of the domestic market with its higher requirement for better meat quality. Consequently, accumulative data collection, genetic evaluation model development, revision of selection indices, as well as cooperation among farms, associations, National Agricultural Cooperative Federation, universities, research institutes, and government agencies must be applied to the Hanwoo selection program. All these efforts will assist the domestic market to secure a competitive position against imported beef under Free Trade Agreement trade system and will provide farmers with higher profits as well as the public with a higher quality of beef.

Analysis on Relation between Rehabilitation Training Movement and Muscle Activation using Weighted Association Rule Discovery (가중연관규칙 탐사를 이용한 재활훈련운동과 근육 활성의 연관성 분석)

  • Lee, Ah-Reum;Piao, Youn-Jun;Kwon, Tae-Kyu;Kim, Jung-Ja
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.46 no.6
    • /
    • pp.7-17
    • /
    • 2009
  • The precise analysis of exercise data for designing an effective rehabilitation system is very important as a feedback for planing the next exercising step. Many subjective and reliable research outcomes that were obtained by analysis and evaluation for the human motor ability by various methods of biomechanical experiments have been introduced. Most of them include quantitative analysis based on basic statistical methods, which are not practical enough for application to real clinical problems. In this situation, data mining technology can be a promising approach for clinical decision support system by discovering meaningful hidden rules and patterns from large volume of data obtained from the problem domain. In this research, in order to find relational rules between posture training type and muscle activation pattern, we investigated an application of the WAR(Weishted Association Rule) to the biomechanical data obtained mainly for evaluation of postural control ability. The discovered rules can be used as a quantitative prior knowledge for expert's decision making for rehabilitation plan. The discovered rules can be used as a more qualitative and useful priori knowledge for the rehabilitation and clinical expert's decision-making, and as a index for planning an optimal rehabilitation exercise model for a patient.

A fundamental study on the development of feasibility assessment system for utility tunnel by urban patterns (도심지 유형별 공동구 설치 타당성 평가시스템 개발에 관한 기초 연구)

  • Lee, Seong-Won;Sim, Young-Jong;Na, Gwi-Tae
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.19 no.1
    • /
    • pp.11-27
    • /
    • 2017
  • The road network system of major domestic urban areas such as city of Seoul was rapidly developed and regionally expanded. In addition, many kinds of life-lines such as electrical cables, telephone cables, water&sewerage lines, heat&cold conduits and gas lines were needed in order for urban residents to live comfortably. Therefore, most of the life-lines were individually buried in underground and individually managed. The utility tunnel is defined as the urban planning facilities for commonly installing life-lines in the National Land Planning Act. Expectation effectiveness of urban utility tunnels is reducing repeated excavation of roads, improvement of urban landscape; road pavement durability; driving performance and traffic flow. It can also be expected that ensuring disaster safety for earthquakes and sinkholes, smart-grind and electric vehicle supply, rapid response to changes in future living environment and etc. Therefore, necessity of urban utility tunnels has recently increased. However, all of the constructed utility tunnels are cut-and-cover tunnels domestically, which is included in development of new-town areas. Since urban areas can not accommodate all buried life-lines, it is necessary to study the feasibility assessment system for utility tunnel by urban patterns and capacity optimization for urban utility tunnels. In this study, we break away from the new-town utility tunnels and suggest a quantitative assessment model based on the evaluation index for urban areas. In addition, we also develop a program that can implement a quantitative evaluation system by subdividing the feasibility assessment system of urban patterns. Ultimately, this study can contribute to be activated the urban utility tunnel.

The evaluation of Soil Erosion Risk of Urban Area based on Geospatial Information (공간정보를 활용한 도심지 토사유실 위험도 평가)

  • Lee, Geun-Sang
    • Journal of Cadastre & Land InformatiX
    • /
    • v.45 no.2
    • /
    • pp.57-70
    • /
    • 2015
  • Recently, soil erosion have been thickening from heavy rainfall according to climate change. These soil erosion is main reason to cause landslide, the water quality, agricultural counterproductivity and so on. Therefore, it is important to find out the main source area to cause soil erosion using geospatial data including DEM, soil map and land cover those are very sensitive to soil erosion modeling. This study evaluated soil erosion using RUSLE model. Hyoja 4-Dong and Pyonghwa 2-Dong among Wansan-Gu showed high as 10,869 ton/yr and 10,477 ton/yr respectively and Ua 2-Dong of Deokjin-Gu showed high as 17,603 ton/yr in soil erosion. And Hyoja 1-Dong and Pyonghwa 1-Dong among Wansan-Gu showed high as $1,485.7ton/km^2$ and $1,297.0ton/km^2$ respectively and Inhu 3-Dong of Deokjin-Gu showed high as $2,557.7ton/km^2$ in unit soil erosion that was applied to the evaluation of soil erosion potential. It is anticipated that achievement of this study can apply to forecast and prepare the risk of soil erosion and debris flow in urban area.

Study on Genetic Evaluation for Linear Type Traits in Holstein Cows

  • Lee, Deukhwan;Oh, Sang;Whitley, Niki C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.23 no.1
    • /
    • pp.1-6
    • /
    • 2010
  • The objectives of this study were to i) investigate genetic performance for linear type traits of individual Holstein dairy cows, especially focusing on comparative traits, and to estimate genetic variances for these traits using actual data, and ii) compare genetic performance and improvement of progeny by birth country of the cows. Linear type traits defined with five comparative traits on this study were general stature composite (GSC), dairy capacity composite (DCC), body size composite (BSC), foot and leg composite (FLC), and udder composite (UDC). These traits were scored from 1 to 6 with 1 = poor, 2 = fair, 3 = good, 4 = good plus, 5 = very good and 6 = excellent. Final scores (FS) were also included in this study. Data used was collected from the years 2000 to 2004 by the Korea Animal Improvement Association (KAIA). Only data of more than five tested cows by herd appraisal date and by sires having more than ten daughters were included to increase the reliability of the data analyses. A total of 30,204 records of the selected traits, which was collected from 26,701 individuals having pedigree information were used. Herd appraisal date, year of age, lactation stage (grouped by month), and time lagged for milking (in hours) were assumed as fixed effects on the model. Animal additive genetic effects considering pedigree relationship and residual errors were assumed with random effects. Year of age at appraisal date was classified from one to nine years of age, assigning the value of nine years of age for animals that were greater than or equal to nine years of age. From our results, the estimate for heritability was 0.463, 0.346, 0.473, 0.290, and 0.430 on GSC, DCC, BSC, FLC and UDC, respectively. The estimate for FS heritability was 0.539. The greatest breeding values for GSC were estimated for Canada, with the breeding values for American lines increasing for 10 years starting in 1989 but tending to decrease after that until 2004. For DCC, the breeding values for American and Canadian lines showed similar patterns until 1999, after which the breeding values for the American lines declined sharply. For BSC, data from Korea, Canada and the USA followed similar trends overall except when the breeding values of the American lines decreased starting in 1999. Overall, the methods used to evaluate genetic performance in this study were acceptable and allowed for the discovery of differences by country of genetic origin, likely due in part to the American use of selection indexes based primarily on milk yield traits until methods for evaluating other traits began to emerge.