• Korean Journal of Computational Design and Engineering
• /
• v.13 no.4
• /
• pp.286-295
• /
• 2008

Construction industry, which is a composite industry being performed by organic combination of various tasks, gives birth to a various of information in the stages of planning, designing, and maintenance management. In particular, the drawing information is broad in the scope of use because it contains all information about buildings as wall as bid, materials, contracts. Therefore, the management of drawing information security is one of the most important factors, which determines the success of failure of business. The major findings and result of this study are as follows to control the distributed drawing information in the collaboration environment. 1) Analysis for function and practical use of DRM in the construction industry. 2) Proposal for applications of DRM that can secure IFC model-based drawing information in the collaboration environment. 3) Extraction from additional IFC entities to apply DRM to part 21 physical files 4) Analysis for functions which are necessary in DRM application prototype system and development of the system. 5) Development IFC model-based DRM prototype system.

• Journal of KIBIM
• /
• v.10 no.4
• /
• pp.98-109
• /
• 2020

Based on the prior research which developed the consistency review checklist of the BIM model and 2D drawing through the drawing analysis of the construction documents phase, the apparent limits of the existing template and the template development items were derived. As well, the BIM-based drawing templates of the construction documentation phase were developed and verified using ArchiCAD BIM software. The developed template was then applied to the actual project model in the construction documents phase, and, as a result, 50% of existing work elements could be utilized as templates. This is an increase of more than 30% over the existing template utilization elements, and it is analyzed to be effective in practical application and utilization. Based on the results of this study, if the BIM model construction criteria matching the drawing's utilization purpose are presented, while at the same time the BIM data interlocking and drawing template development studies are conducted, the utilization of BIM data can be maximized and additional drawing work can be minimized to increase the percentage of template utilization elements. In addition, it is believed that this can employed to address functional and institutional problems of BIM-based drawing and make a contribution to the activation of BIM.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.68-69
• /
• 2018

The construction drawing is a collection of knowledge that has accumulated knowledge and experience of designers and is highly valuable for recycling in the future. BIM is a process and technology that acquires and manages the information needed for the whole life cycle of a building. In order to recycle digitalized 2D drawings in BIM Tool, it is required to use 3D information based on the drawing information to save and reuse them, but there is little research on related methods or system development. In this study, 3D elements are created based on 2D drawing information, and libraries are constructed, and BIM Tool is used to improve the recyclability of drawing information.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.6
• /
• pp.412-421
• /
• 2006

Recently, the needs for sharing and exchanging drawing information between 2D and 3D data in complex facilities are well recognized throughout the construction industries. The purpose of this study is to propose an information framework to represent 3D IFC (Industry Foundation Classes) -based drawing of building services in complex facilities as 2D drawing. In this study, 1) attributes of building service objects which are used in 3D CAD system are analyzed and present drawing standards are analyzed, 2) based on the analysis, an information framework is developed to represent 3D model in 2D representation, and 3) further more, to test a compatibility of the information sharing framework, number of standardized APIs and an IFC2Dbrowser are developed during the study.

• The Journal of Society for e-Business Studies
• /
• v.7 no.2
• /
• pp.39-53
• /
• 2002

In the Korean domestic construction field, there are a lot of problems related to construction information exchange and sharing owing to the absence of construction drawing information exchange standard. To remedy the aforementioned inefficiency effectively, it is necessary to apply the STEP standard which is known as an international standard for achieving the establishment of Construction CALS. This study focus on suggesting a methodology to activate the STEP based construction drawing information exchange standard to the current construction drawing information exchanging and sharing practice. In this paper, the domestic and foreign standardization projects related to the construction drawing information have been investigated and analyzed. In addition, a methodology of applying and activating the STEP standard has been suggested. Finally, a verification and certification methodology for applying the CALS/EC construction drawing information exchange standard(STEP) have been suggested.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.256-264
• /
• 2006

Currently, it is necessary to share and exchange drawing information between 2D and 3D data in AEC(Architecture, Engineering & Construction) fields. The authors suggest an information model framework to express IFC(Industry Foundation Classes)-based drawing of 3D AEC products as 2D drawing. In this study, 1) an information framework has been developed to enable sharing and exchange of AEC product model by adding various information factors, 2) standardized APIs and an IFC2DBrowser are developed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.259-261
• /
• 2015

In order to provide a safe and secure electronic navigational chart information services, AIS information, information on aids to navigation, maritime safety information, weather information, information on a variety of birds such as the data fused S-100 standards-based e-Navigation system should be established. S-101 ENC implement Rendering Engine analyzes the Drawing Instruction set generated by Portrayal Engine of the S-100 General Portrayal Model for is a job to be followed to establish the e-Navigation System to implement the S-101 ENC Should be. In this paper, we analyze the Drawing Instruction of the existing S-57 ENC and S-101 ENC is the basis for the implementation of the S-101 ENC.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2002

As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.

• Journal of Korea Multimedia Society
• /
• v.9 no.12
• /
• pp.1596-1606
• /
• 2006

There has been more increased the development of 3D technique since many 3D contents of 3D graphic model, 3D mobile/computer game, and 3D CAD have been serviced in Web or industry fields. Therefore, the watermarking system is more required to protect the copyright for 3D contents. Currently there has been researched about the watermarking for 3D graphic model of mesh or NURBS. However, watermarking technique based on CAD design drawing leaves something to be desired yet. This paper proposed the watermarking technique for 3D CAD design drawing using Line and Arc components. After drawing out Line and Arc components from designed drawing, we embed the watermark into both the length of Line component and the radius of Arc component. Experimental results verified that the proposed algorithm satisfies the transparency about watermarked drawing and also has the robustness against several attacks by using public CAD tool.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2022

The goal of this paper is to create a deep learning model based on triplet loss for generating similar child drawing selection algorithms. To assess the similarity of children's drawings, the distance between feature vectors belonging to the same class should be close, and the distance between feature vectors belonging to different classes should be greater. Therefore, a similar child drawing selection algorithm was developed in this study by building a deep learning model combining Triplet Loss and residual network(ResNet), which has an advantage in measuring image similarity regardless of the number of classes. Finally, using this model's similar child drawing selection algorithm, the similarity between the target child drawing and the other drawings can be measured and drawings with a high similarity can be chosen.