• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.401-412
• /
• 2014

This study is purposed on showing an effective process for coordinate transformation of cadastral maps, based on the local datum, in the World Geodetic System (WGS) for Cadastral Reform Project (CRP). The process follows three steps: coordinate adjustment, datum transformation and distortion modeling. The first procedure is that point coordinates on local datum has to be adjusted by those GPS observed point-to-point distances, using trilateration. Secondly, the adjusted coordinates need to be transformed to WGS by applying the Affine model, while the verification of the methodology is implemented under numerical experiments. To conduct this procedure, 195 points in the same coordinate origins in Seoul and 61 points in several different origins in Incheon are used in the estimation. As a result, there are less than 2cm coordinate differences between transformed coordinates and measured ones at everywhere. Also, it is remarkable that the transformation does not depend on either of the particular common points or the sizes of computed region. Therefore, this suggested methodology is expected to easily provide identifications and corrections for points-deviations for improved quality of the cadastral map by distortion modeling through CRP.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.427-434
• /
• 2003

In this paper, we present a speech-based Environmental Control System(ECS) and its application. In the concrete, an ECS using the speech recognition and an portable wheelchair lift control system with the speech synthesis are developed through the simulation and the embodiment. The developed system apply to quadriplegic man and we evaluate the result of physical effect and of mental effect. Speech recognition system is constructed by real time modules using HMM model. For the clinical application of the device, we investigate the result applied to 54-years old quadriplegic man during a week through the questionnaires of Beck Depression Inventory and of Activity Pattern Indicator. Also the motor drive control system of potable wheelchair lift is implemented and the mechanical durability is tested by structural analysis. Speech recognition rate results in over 95% through the experiment. The result of the questionnaires shows higher satisfaction and lower nursing loads. In addition, the depression tendency of the subject were decreased. The potable wheelchair lift shows good fatigue life-cycle as the material supporting the upper wheelchair and shows the centroid mobility of safety. In this paper we present an example of ECS which consists of real-time speech recognition system and potable wheelchair lift. Also the experiments shows needs of the ECS for korean environments. This study will be the base of a commercial use.

• Journal of Korean Home Economics Education Association
• /
• v.1 no.1
• /
• pp.1-17
• /
• 1989

Present, we cannot expect the maximum studying effect in a home economics and the drill unit of secondary schools because of several problems. Such problems can be enumerated as follows. 1. The explaination of a making process in texts would be difficult for the students who have a poor understanding to grasp. 2. The much effort would be made due to teacher’s repeated exhibition, by which the progress of a text might be unreasonable. 3. The teachers unaccustomed to the drill might treat it carelessly and become to avoid it. 4. The skill to grasp a general work flow might be lack. Baseing on such problems, this researcher did using a medium of Video in teaching method of home economics. For this purpose, the quality of Video Tape would be important. Above all, we made out the script of Video Tape through advices of specialists in Video medium, majors in home economics, and the students teaching of home economics and the concerned persons, by which we recorded a gather skirt, as a finished goods, especially of the characteristics of each kind of a skirt. Next, we recorded and produced the total steps from a preparation of skirt-making to a finishing as using a V.T.R. shot technique. The Video would be screened and the supplemented explaination of a teacher would be added in a step of instruction. In the development of instruction, students would begin the making. The expected effects according to using Video Tape are as follows. 1. The making order of text would be exhibited by a model directly and the explaination of a narrator would be added concurrently, by which students would understand it easily as confirming each step. 2. All students can watch these steps owing to a close up, one of the V.T.R Techniques. Accordingly, the teacher’s efforts would be decreased and the proper progress of a text could be maintained because of no repeated exhibition of a teacher. 3. To the teachers unaccustomed to and interested in a drill, the medium would become a subsidiary means. 4. Study all steps of a making, students would become to understand the general flow of a work. Therefore, it might be possible to generalize another units of a making. However though this study was designed don a basis of such effects, the using effects based on only the existing study results, and was focused on the production of a medium. Because this research would be a teacher and there was noncooperation of secondary schools, it was impossible to experiment in schools, which was the prime limitation of this study. Therefore we should be experiment further for the continuous studying.

• Communications of Mathematical Education
• /
• v.20 no.3 s.27
• /
• pp.425-441
• /
• 2006

Entering upon 21th, the internet which bring the digital era, are changing the paradigm of education and cultivating creative and challenging person, which is the core of competitive power in knowledge-information society, is more emphasized than ever. To meet the needs of the present times, it has been concentrating its effort to improve learning-environment using e-Learning in the field of teaching. E-schoolbooks that were introduced recently by way of showing an example are representative case of this intention. Though many e-learning contents are being developed, the more speedily a society grow, the shorter the life of contents are. Moreover, the contents developed are impossible to use directly for tele-education system, so standard types adjusted for various kind of system are showing up. Among them the leading standard type is SCORM(Sharable Content Object Reference Medel) made in ADL(Advanced Distributed Learning) Corporation. The KERIS' Cyber Home Education System adopted this and is using it. So, in this study, we set the goal at designing and developing an e-learning contents and an experiment-focused mathematics that suit the KERIS' Cyber Home Education System on the basis of SCORM.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.467-485
• /
• 2015

The market share of private brand(PB) is growing at a rapid pace. Based on the previous studies, consumers pay more attention to the extrinsic cues when they buy the PB products. This paper proposes an integrated model to examine how the retailer credibility which is one of the important extrinsic cues affects perceived quality variation, value consciousness, attitude to PB, and PB product purchase intention. Also, familiarity with PB is regarded as a moderating variable that can interact with retailer credibility. An analysis of 199 useable questionnaires found that retailer credibility has a significant impact on the attitude to PB, directly and indirectly. Further, the moderating effect of familiarity with PB was significant. For this, we interpret that when consumers are more familiar with the private brand, they tend to have few bias toward the quality of PB. These findings provide several effective strategies for the development of PB, such that retailers must improve consumer's familiarity with PB via various promotions like free samples or testing events. Academic and practical implications of the study findings and future research directions are also discussed.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.51-59
• /
• 2002

This paper deals with development of a damage risk assessment system for adjacent buildings to under-passing tunnel face considering 3D-ground movement. The system consists of building and ground information module, monitoring data module, settlement evaluation module, and building damage risk assessment module. The major modules, settlement evaluation module and building damage assessment module, are based on settlement estimation model suggested by Attewell et al (1982) and the building damage assessment method by Mair et al. (1996). After estimating 3D-ground movements due to tunneling with settlement evaluation module, damage assessment far buildings is performed using building damage risk assessment module. The developed system has two major functions; 1) calculation of 3D-settlement with ground loss ($V_{s}$)or maximum settlement ($w_{max}$) and inflection point (i) using various empirical formulae, monitoring data, numerical results, and so on; 2) assessment of damage risk for adjacent buildings of arbitrary section with position change of tunnel face. The field data given by Boscadin and Cording (1989) leer the case of two-storied masonry building near the Metro tunnel in Washington D.C. was simulated to verify the applicability of the developed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1744-1751
• /
• 2011

The concept of the advanced concept technology demonstration (ACTD) has previously been introduced in USA in order to make it possible to rapidly transfer advanced technologies developed in commercial sectors to develop weapon systems in the defense area. Since then in Korea several ACTD programs have been developed and being carried out However, there are few program management methods suitable for the characteristics of the ACTD programs, which requires stringent management of the program requirements and risks due to the radically shortened development time. In this paper such a problem has been addressed and as a solution approach the quality function deployment (QFD) method has been adopted, which is being served as a successful model in various areas such as manufacturing. The QFD method is used in our study to improve communication between various stakeholders involved in the ACTD programs and also to reduce risks related to requirements. Specifically we have developed the ACTD standard templates based on the QFD method and discussed how to use the developed templates. Finally, the application of the study result is demonstrated through the ACTD program of flight information demonstration system and also specific ways are suggested to use the standard templates, to manage requirements, and to reduce risks.

• Journal of Technologic Dentistry
• /
• v.35 no.2
• /
• pp.157-171
• /
• 2013

Purpose: This study aims to present a database for the development of a healthcare management program based on the survey and analysis of self reported psychosomatic symptoms among the current dental technology students. Methods: Subjects of our study are 480 dental technology major students enrolled in a third year college located Gyeonggi, Chungcheong, and Gangwon province. Using a random sampling, we conducted a self-report survey from August 30, 2011 to October 28, 2011 and 418 reports were collected as feedback and we put an analysis on them. Results: 1. The average physical self symptom was 20.49, which is higher than the average mental self symptom(18.54). Of the subcategories of psychosomatic self symptom, we observed multiple subjective symptoms as the highest one(37.77), and aggression as the lowest(13.77). 2. As to gender, both physical and mental self symptom were statistically significant with the scale score of(p<.001). The scale score of subcategories is as follows; multiple subjective symptoms(I, p<.001), eye and skin(B, p<.001), digestive(C, p<.001), impulsiveness(H, p<.001), lie scale(L, p<.001), mental instability(J, p<.001), depression(K, p<.001), aggression(F, p<.001), irregularity of life(G, p<.001), mouth and anal(D, p<.05), nervousness(E, p<.05). 3. As for obesity, statistical significance was shown with the scale scores of physical self symptom(p<.001), multiple subjective symptoms(I, p<.001), digestive(C, p<.001), aggression(F, p<.001), depression(K, p<.01), irregularity of life(G, p<.01), respiratory(A, p<.05), eye and skin(B, p<.05), impulsiveness(H, p<.05), mental instability(J, p<.05). The scale scores in the environmental quality and life satisfaction were shown as follows; depression(K, p<.001), lie scale(L, p<.01), and irregularity of life(G, p<.05). 4. We employed multiple regression analysis to take account of general factors affecting psychosomatic self symptoms, and drew that the explanatory power of the model was proved with the scales of physical self symptom(4.1%) and mental self-symptom(3.6%). Obesity was a factor that affects physical self symptom with the scale score of(p<.01), and environmental quality and life satisfaction(p<.01) and obesity(p<.05) affect mental self symptom. Conclusion: In this analysis we observed obesity of dental technology students can influence their psychosomatic self symptoms. In this sense, it would be reasonable to develop a healthcare management and education programs that help the students maintain a healthy weight and promote their health.

• Journal of Distribution Science
• /
• v.15 no.3
• /
• pp.61-72
• /
• 2017

Purpose - The ICT development is affecting the consumer behaviors in selecting channel or distribution system. This study aims to advance the theory on the influence and interaction with omni-channel behaviors. Specifically, analyzing moderating variable is category knowledge that effect between propensity of brand loyalty and its precedence factor which is perceived difference, perceived value, authenticity and consumer-brand relationship. Research design, data, and methodology - The subject of this research is consumers who purchase goods in omni-channel situation. The hypothesis of this research is derived from the literature of the preceding research analysis on brand loyalty, omni-channel and consumer behaviors. This study have constructs that were defined operationally with reference to previous studies, and the research model was designed to figure out the structural relationship among perceived difference, perceived value, authenticity, consumer-brand relationship and brand loyalty. From 2016 Sept. 1 to Dec. 31, a questionnaire survey was performed targeting customers using omni-channel. 327 questionnaire survey had conducted. 316 survey data were used for empirical analysis except data that had missing and wrong value. AMOS(structural equation) was used to confirm the hypothesis which developed by researcher. Results - The results of this study are as follows. First, an authenticity has significant effect on brand loyalty. Second, in the omni-channel situation, but perceived differentiation, perceived value, consumer-brand relationship does not affect brand loyalty. According to this result, it is judged that it is easy to search for information in the situation of omni-channel and integrated decision making is done without distinction between channels. Third, category knowledge has moderating effect between brand loyalty and precedence factors. When the category knowledge level is low, preceding factors have a significant effect on brand loyalty. when the category knowledge level is high, the preceding factors did not have a significant effect on brand loyalty except the authenticity. Conclusions - This study finds out omni-channel's phenomenon is different from other distribution channel phenomenon. In the situation of omni-channel, it is suggested that brand loyalty may be relatively low for a certain brand because it raises the knowledge level of the category. Then this study provides a managerial implications based on the role of the moderate effect on category knowledge, brand loyalty and omni-channel.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.75-80
• /
• 2019

Sales of the Korean clothing industry grew to 16.9 percent on-year in 2010, but the growth rate dropped to 3 percent from 2011 to 2016 and the overall market began to slump to 1.1.6 percent in 2017. The competitiveness of clothing companies is also a major sector in logistics capability, and the average logistics cost of domestic clothing companies is 8.3 percent of sales in 2011, higher than the average 8 percent of domestic industries, and 36.4 percent of the total storage cost in 2011, higher than the 28.8 percent share of the total storage cost of domestic companies. As domestic production conditions such as wage hikes and labor disputes worsened in the 1990s, production facilities were rapidly moved overseas, which led many clothing companies to have no production facilities or a minimal production base in Korea and focus on marketing and design capabilities. The total storage capacity and storage efficiency of the logistics center became very important as the products were changed to the form of mass warehousing and small-volume forwarding. Research shows that building column spacing, a model of this research, can affect the amount of hanger rack storage empirically, so for sustainable growth of clothing companies, it is necessary to improve competitiveness in the logistics market by reducing costs and improving efficiency to overcome difficulties in corporate management. Because logistics costs are 8.3 percent and operating profit to sales ratio is 2 percent, it is expected that operating profit will increase by 41.5 percent if logistics costs are reduced by 10 percent. If 10% of storage cost is saved based on storage cost, operating profit is expected to increase by 15% To strengthen the competitiveness of the clothing industry, a reduction in logistics costs is essential. Therefore, the purpose of this study is to provide hints that logistics experts can have empirically small amounts in reducing storage costs through column spacing adjustment of logistics centers that have not been dealt with statistically until now, and to contribute to the continued growth of clothing companies and the development of the domestic logistics industry.