• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.243-252
• /
• 2010

This paper describes a new practical simplification method for feature-based solid models. In this approach, a solid model created using feature modeling operations is first simplified by the suppression of detailed features, and then, if necessary, the model is converted to a surface model to facilitate its modification. Finally, the simplified surface model is delivered to analysis packages. The algorithm was implemented based on CATIA V.5 and applied to mid-surface generation of plastic parts for structural analysis to prove the validity and usefulness.

• 대한전기학회논문지
• /
• 제31권8호
• /
• pp.33-38
• /
• 1982

This paper deals with the simplification of the transfer function in a frequency domain, viz. the integral of the squared errors between the original and the simplified model is minimized and the latter is estimated by the Walsh function. It tries to minimize the errors between the frequency responses of the two functions. This method is compared with the existing method by means of a numercal example. The frequency response of this simplified model approximates closely to that of the original model. The proposed method is simpler in analysis and easier in implementation than the existing methods. Though the Walsh function can be easily generated with the discrete values, it has errors because its zero crossings are not continuous. This method aims at the reduction of the errors in the real parts and the imaginary parts of the two functions by dividing into the more sub-intervals, and selecting the reduced-order model according to the response of the model. As a result, it can be applied for the simplification of higher order functions into lower order functions and for the design of control systems.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1333-1344
• /
• 2019

An integrated approach of model simplification for high burnup spent nuclear fuel is proposed based on material calibration using optimization. The spent fuel rods are simplified into a beam with a homogenous isotropic material. The proposed approach of model simplification is applied to fuel rods with two kinds of interfacial configurations between the fuel pellets and cladding. The differences among the generated models and the effects of interfacial bonding efficiency are discussed. The strategy of model simplification adopted in this work is to force the simplified beam model of spent fuel rods to possess the same compliance and failure characteristics under critical loads as those that result in the failure of detailed fuel rod models. It is envisioned that the simplified model would enable the assessment of fuel rod failure through an assembly-level analysis, without resorting to a refined model for an individual fuel rod. The effective material properties of the simplified beam model were successfully identified using the integrated optimization process. The feasibility of using the developed simplified beam models in dynamic impact simulations for a horizontal drop condition is examined, and discussions are provided.

• 대한전자공학회논문지SP
• /
• 제42권6호
• /
• pp.141-148
• /
• 2005

이동 통신이나 인터넷 채널과 같이 전송용량이 제한적인 환경에서 3차원 물체에 그래픽의 사용이 빈번해 지면서 3차원 모델을 단순화시켜야할 필요성이 증대되고 있다. 삼각형으로 표현된 3차원 물체의 표면을 단순화시키는 경우, 3차원 공간에서의 꼭지점들 중에서 제일 가까운 점 두 개를 선택하여 반복적으로 데이터를 줄여가는 vertex contraction 방법이 많이 사용되고 있다. 이때 단순화 된 점의 위치를 결정하기 위하여 단순화시 발생하는 오차를 계산하여야 한다. 본 논문에서는 새로운 오차 계산법을 제시하여 원 모델과의 오차가 작게 단순화하는 방법을 제안하고, 이를 3차원 모델 데이터에 적용하여 실제 개선결과를 확인한다.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.409-420
• /
• 2007

ASM No. 1 is a very useful model to analyze wastewater treatment system removing organic carbon and nitrogen material. But it isn't adequate to control the wastewater treatment system with real time since it has many material divisions and parameters. So, the purpose of this study is the simplification of ASM No. 1 to control the wastewater treatment system. ASM No. 1 was changed with the model which has 3 material divisions(COD, $NH_4{^+}$, $NO_3{^-}$) and two phases(Aerobic and Anoxic condition). SBR was running with two phases(Phase I and II). Phase II running 20 minutes with aerobic time was used for deciding model parameters and Phase I running 12 minutes with aerobic time was used for proving the simplified model. The simplified model was compared with ASM No. 1 using data of Phase I and II. As a result of model comparison, the simplified model has enough ability to express the variation of $NH_4{^+}$ compound.

• 한국수자원학회논문집
• /
• 제52권8호
• /
• pp.531-543
• /
• 2019

최근 발생하는 반복적인 홍수피해를 최소화하기 위한 실시간 도시홍수예보 연구에서는 정확한 유출, 침수결과를 나타내는 모형과 그 모형의 모의시간 단축이 중요한 핵심요소이다. 서울특별시를 비롯한 주요 도시지역의 하수관망은 그 개수는 많고 복잡하여 실시간 도시홍수예보에 적합하지 않아 강우-유출모형의 단순화를 진행한다. 하지만 하수관망의 단순화는 연구자의 주관과 단순화 방식에 따라 유출결과가 크게 달라질 수 있으며 2차원 침수분석에서는 그 차이가 더욱 크게 발생한다. 따라서 본 연구에서는 하수관망의 개수 및 분포가 각각 다른 여러 도시지역의 하수관망을 일정 기준으로 단순화하고 2차원 침수분석을 통해 하수관망 규모에 따른 단순화 모형의 정확성을 평가하고자 한다. 하수관망의 단순화 분석은 서울시의 주요 상습침수구역인 신림, 관악, 도림천 유역을 대상으로 진행하였으며 구축한 SWMM에서 노드의 누가유역면적을 4가지 범위로 나누어 단순화를 위한 범위산정 기준으로 설정하였다. 이를 통해 산정된 단순화 모형의 침수결과는 실시간 도수홍수예보에 적합한 정확도 높은 유출모형 구축에 기여할 수 있을 것으로 기대한다.

• ETRI Journal
• /
• 제34권5호
• /
• pp.791-794
• /
• 2012

We propose an efficient framework to realistically render 3D faces with a reduced set of points. First, a robust active appearance model is presented to detect facial features in the projected faces under different illumination conditions. Then, an adaptive simplification of 3D faces is proposed to reduce the number of points, yet preserve the detected facial features. Finally, the point model is rendered directly, without such additional processing as parameterization of skin texture. This fully automatic framework is very effective in rendering massive facial data on mobile devices.

• 한국콘텐츠학회논문지
• /
• 제3권4호
• /
• pp.69-76
• /
• 2003

최근 컴퓨터 그래픽스 분야에서는 3차원 애니메이션에 대한 연구가 활발히 이루어지고 있다. 3차원 애니메이션에서 중요한 연구 분야 중 하나가 인간을 애니메이션 하는 것이다. 3차원 얼굴을 이용한 애니메이션 제작은 주로 애니메이터에 의해 수작업으로 해당 프레임별로 작업을 진행하므로 많은 노력과 시간, 해당 장비와 3D 소프트웨어를 필요로 했다. 본 논문에서는 정면 얼굴 이미지를 입력하여 쉽고 빠르게 특정얼굴에 근접한 3D 얼굴모델을 생성하는 방법을 구현하였다. 이를 위해 3D 일반모델의 메쉬 데이터를 간략화 하는 기법에 대해서 제안한다.

• 제어로봇시스템학회논문지
• /
• 제6권5호
• /
• pp.339-344
• /
• 2000

This paper is concerned with the simplification of complex linear time-invariant systems. A simple technique is suggested using the well-known least squares method in the frequency domain. Given a high-order transfer function in the s- or z-domain, the squared-gain function corresponding to a low-order model is computed by the least squares method. Then, the low-order transfer function is obtained through the factorization. Three examples are given to illustrate the efficiency of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.65-67
• /
• 1986

The model simplification method of the linear time invariant continuous system is proposed. Using the energy dispersion method the dynamic modes with dominent energy contribution are selected, and the poles of the denomenater are retained. And there is investigated how the dynamic modes affected the system characteristic. The parameters of the numerator are determined by time moment matching method. This method is that the algorithm is simple and also the simplified model found is always stable if the original system is stable, and through examples we assured that this method leads to good results in both transient and steady state responses.