• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.1
• /
• pp.1-9
• /
• 1976

Using the computer programs for calculation of natural vibrations of ship's hull developed by the authors et al., an investigation into influences of various parameters on the accuracy of calculation was done through example calculations of a 30,000 DWT petroleum products carrier M/S Sweet Brier built by Korea Shipbuilding and Engineering Corporation. The methodical principles employed for the computer program development are as follows; (a) the ship system is reduced to an equivalent discrete elements system conforming to Myklestad-Prohl model, (b) the problem formulation is of transfer matrix method, and (c) to obtain solutions an extended $G\ddot{u}mbel's$ initial value method is introduced. The scope of the investigation is influences of number of discrete elements, choice of significant system parameters such as rotary inertia, bending stiffness and shear stiffness, and simplification of distributions of added mass and stiffness as trapezoidal ones referred to those of midship section on the calculation accuracy. From the investigation the followings are found out; (1) To obtain good results for the modes up to the seven-noded thirty or more divisions of the hull is desirable. For fundamental mode fifteen divisions may give fairly good results. (2) The influence of rotary inertia is negligibly small at least for the modes up to the 5- or 6- noded. (3) In the case of assuming either bending modes or shear modes the calculation results in considerably higher frequencies as compared with those based on Timoshenko beam theory. However, the calculation base on the slender beam theory surprisingly gives frequencies within 10% error for fundamental modes. (4) It is proved that to simplify distributions of added mass and stiffness as trapezoidal ones referred to those of midship section is a promising approach for the prediction of natural frequencies at preliminary design stage; provided good accumulation of data from similar type ships, we may expect to obtain natural frequencies within 5% error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.871-885
• /
• 2015

The improved DFSA for 2.4GHz multi-tags active RFID is suggested in 2 different ways: 1) simplified tag collection and Ack procedure using query command and 2) modified Schoute's method to control the number of slots in the frame. To evaluate the performance of the improved system we develop the simulation model. Varying the number of tags in the system we track the performance measures such as throughput, recognition time for multi-tags and tag recognition rate during a given time. The suggested method shows the best performance over all measures. Simplification of collection and Ack commands using query commands contributes to reducing tag recognition time. And the modified Schoute's method which controls the frame size using $k_1$ and $k_2$ contributes to throughput improvement and reduces target cognition time by reducing the number of collection rounds.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.190-198
• /
• 2010

Asymmetric model for plasma uniformity by Ar and $CF_4$ was modeled by the antenna structure, the diameter of chamber, and the distance between source and substrate for the development of plasma equipment for 450 mm wafer. The aspect ratio of chamber was divided by diameter, distance from substrate, and pumping port area. And we found the condition with the optimized plasma uniformity by changing the antenna structure. The drift diffusion and quasi-neutrality for simplification were used, and the ion energy function was activated for the surface recombination and etching reaction. The uniformity of plasma density on substrate surface was improved by being far of the distance between substrate wall and chamber wall, and substrate and plasma source. And when the antenna of only 2 turns was used, the plasma uniformity can improve from 20~30% to 4.7%.

• Nuclear Engineering and Technology
• /
• v.43 no.6
• /
• pp.583-592
• /
• 2011

The radiological characteristics for waste classification were assessed for neutron-activated decommissioning wastes from a CANDU reactor. The MCNP/ORIGEN2 code system was used for the source term analysis. The neutron flux and activation cross-section library for each structural component generated by MCNP simulation were used in the radionuclide buildup calculation in ORIGEN2. The specific activities of the relevant radionuclides in the activated metal waste were compared with the specified limits of the specific activities listed in the Korean standard and 10 CFR 61. The time-average full-core model of Wolsong Unit 1 was used as the neutron source for activation of in-core and ex-core structural components. The approximated levels of the neutron flux and cross-section, irradiated fuel composition, and a geometry simplification revealing good reliability in a previous study were used in the source term calculation as well. The results revealed the radioactivity, decay heat, hazard index, mass, and solid volume for the activated decommissioning waste to be $1.04{\times}10^{16}$ Bq, $2.09{\times}10^3$ W, $5.31{\times}10^{14}\;m^3$-water, $4.69{\times}10^5$ kg, and $7.38{\times}10^1\;m^3$, respectively. According to both Korean and US standards, the activated waste of the pressure tubes, calandria tubes, reactivity devices, and reactivity device supporters was greater than Class C, which should be disposed of in a deep geological disposal repository, whereas the side structural components were classified as low- and intermediate-level waste, which can be disposed of in a land disposal repository. Finally, this study confirmed that, regardless of the cooling time of the waste, 15% of the decommissioning waste cannot be disposed of in a land disposal repository. It is expected that the source terms and waste classification evaluated through this study can be widely used to establish a decommissioning/disposal strategy and fuel cycle analysis for CANDU reactors.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.561-571
• /
• 2021

Cofferdams made of teel sheet piles are commonly utilized as support structures for excavation of sea-crossing bridge foundations. As cofferdams are often subject to tide variation, it is imperative to consider potential effects of tide on stability and serviceability of sheet piles, particularly, ultralong steel sheet piles (USSPs). In this study, a real USSP cofferdam constructed using new construction technology in Nanxi River was reported. The design of key parts of USSP cofferdam in the presence of tidal action was first introduced followed by the description of entire construction technology and associated monitoring results. Subsequently, a three-dimensional finite-element model corresponding to all construction steps was established to back-analyze measured deflection of USSPs. Finally, a series of parametric studies was carried out to investigate effects of tide level, soil parameters, support stiffness and construction sequence on lateral deflection of USSPs. Monitoring results indicate that the maximum deflection during construction occurred near the riverbed. In addition, measured stress of USSPs showed that stability of USSP cofferdam strengthened as construction stages proceeded. Moreover, the numerical back-analysis demonstrated that the USSP cofferdam fulfilled the safety requirements for construction under tidal action. The maximum deflection of USSPs subject to high tide was only 13.57 mm at a depth of -4 m. Sensitivity analyses results showed that the design of USSP cofferdam system must be further improved for construction in cohesionless soils. Furthermore, the 5th strut level before concreting played an indispensable role in controlling lateral deflection of USSPs. It was also observed that pumping out water before concreting base slab could greatly simplify and benefit construction program. On the other hand, the simplification in construction procedures could induce seepage inside the cofferdam, which additionally increased the deflection of USSPs by 10 mm on average.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.269-269
• /
• 2023

기후 변화로 인한 강우 패턴의 변화는 도심지 방재성능 목표를 상회하는 홍수로 이어져 침수피해를 가중시키고 있다. 이로 인한 도시침수 피해를 저감하기 위하여 도시침수 예측모형 개발이 활발히 이루어지고 있으나, 대규모 관망으로 이루어진 복잡한 도심지 우수관망을 모의하기 때문에 분석속도가 느려 실시간 예측 적용에 한계점이 있다. 도시침수 분석에 가장 많이 활용되는 대표적인 모형인 SWMM(Storm Water Management Model)은 복잡한 관망을 비교적 빠르고 정확히 해석할 수 있어 유용하지만, 이 또한 대도심의 우수관망 모의 시 많은 시간이 소요되며, 관망 정밀도 기준이 정의되어 있지 않아 분석에 어려움이 있다. 이러한 문제점을 해결하기 위하여 본 연구에서는 관망 간소화 기법(유역면적의 밀도, 관거 직경, 관로의 길이 등)을 적용하고, 이에 따른 주요 지선과 간선의 수위 변화와 침수흔적도를 비교하여 분석결과의 정확성을 담보하는 관망 간소화 수준을 파악하고 도시침수 분석 시 적정 간소화 기준과 자동 간소화 방안을 제시하고자 한다. 도시침수 분석 시 우수관망 자동 간소화를 위하여 Python을 활용한 코드를 작성하였으며, SWMM의 .inp 파일을 읽어들여 Dataframe형태로 저장한 후 분석을 위한 데이터 가공, 간소화 기준에 따른 분류, 간소화 대상 수리·수문인자 연산, 인접 간선에 연결, 간소화된 .inp파일 저장의 총 6단계로 구성하였다. 연구 대상지역은 도림천 유역으로 설정하였으며, 초기자료는 맨홀 30,469, 관거 32,443, 소유역 30,586개로 이루어져 있으며, 모의 시간은 약 2시간 30분이 소요되었다. 유역면적 100x100 미만을 대상으로 수행 시 맨홀 9,965, 관거 10,464, 소유역 9,240개로 관거의 복잡도가 약 1/3 감소하였으며, 모의 시간은 약 43분으로 기존대비 약 72% 단축되는 것으로 나타났다. 실제 침수가 발생한 주요지점들을 비교한 결과 R² 0.85 ~ 0.92로 예측모형의 정확도에 큰 영향을 끼치지 않는 것으로 나타났다. 도시침수모형 최적 간소화를 통해 모형의 복잡성을 줄이고, 계산량을 줄여 모형의 수행시간을 단축시킬 수 있으며, 불필요한 우수관망을 제거하거나 병합함으로써, 모형의 예측력 향상과 분석과 해석에 효율적으로 사용될 수 있을 것으로 기대한다.

• Geomechanics and Engineering
• /
• v.34 no.6
• /
• pp.683-696
• /
• 2023

The destruction and fracture of rock masses are crucial components in engineering and there is an increasing demand for the study of the influence of rock mass heterogeneity on the safety of engineering projects. The numerical manifold method (NMM) has a unified solution format for continuous and discontinuous problems. In most NMM studies, material homogeneity has been assumed and despite this simplification, fracture mechanics remain complex and simulations are inefficient because of the complicated topology updating operations that are needed after crack propagation. These operations become computationally expensive especially in the cases of heterogeneous materials. In this study, a heterogeneous model algorithm based on stochastic theory was developed and introduced into the NMM. A new fracture algorithm was developed to simulate the rupture zone. The algorithm was validated for the examples of the four-point shear beam and semi-circular bend. Results show that the algorithm can efficiently simulate the rupture zone of heterogeneous rock masses. Heterogeneity has a powerful effect on the macroscopic failure characteristics and uniaxial compressive strength of rock masses. The peak strength of homogeneous material (with heterogeneity or standard deviation of 0) is 2.4 times that of heterogeneous material (with heterogeneity of 11.0). Moreover, the local distribution of parameter values can affect the configuration of rupture zones in rock masses. The local distribution also influences the peak value on the stress-strain curve and the residual strength. The post-peak stress-strain curve envelope from 60 random calculations can be used as an estimate of the strength of engineering rock masses.

• Journal of Korean Society for Quality Management
• /
• v.51 no.3
• /
• pp.381-401
• /
• 2023

Purpose: The purpose of this study was to understand the perception of medical staff to propose an infected patient transport robot as a means of responding to infectious diseases. Methods: The data collected through the survey was analyzed through AHP analysis. The measurement tools used in this study were derived through the SERVQUAL model and Focus Group Interview(FGI), and consisted of four detailed questions for each of five classes: tangible, reliability, responsiveness, assurance, and empathy. Results: As a result of the study, there are concerns about risk factors that may occur in areas where medical staff intervention is minimized. Above all, we confirmed the consensus that safety should be the top priority during the process of robots to transport patients. In particular, highlighted were the resolution of device errors that may occur during the process for transporting patients and easy provision of the first aid. Additionally, the ability to monitor patients and suppress infection factors turned out to be important, which was directly related to the simplification of the role of medical staff and work efficiency. Conclusion: As one of the means of effectively controlling infectious diseases in a pandemic situation, a robot to transport the infected patient was considered. However, in order to commercialize this, specific verification of the safety of medical staff and patients is needed, and empirical data on providing the first aid, patient monitoring, and infection factor suppression should be presented.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.429-435
• /
• 2017

In order to increase the therapeutic effect of radiation, there has been an increase in the use of conventional photon therapy. The intensive care unit should pay more attention to the radiation safety evaluation due to the higher energy and the larger facility compared to the existing Photon treatment. These radiation safety evaluations are mainly performed by using Monte Carlo simulation, and the first thing to be done is geometric modeling. The Heavy-ion treatment facility uses synchrotron as the accelerating device, which is difficult to precisely model geometrically and is mostly modeled briefly. This study investigated the effect of simplification and precise implementation of Dipole magnet among the components of synchrotron acceleration device on the radiation safety evaluation. The results show that the simplified geometric model is overestimated with the precisely implemented geometric model. Therefore, it is considered that the radiological safety evaluation results in more reliable results of the precise geometric modeling.

• Journal of Environmental Impact Assessment
• /
• v.21 no.3
• /
• pp.483-501
• /
• 2012

The purpose of this study was to apply a multi-metric model of Lentic Ecosystem Health Assessments(LEHA) for environmental impact assessments of Cheongpyung Reservoir during 2005 - 2006 and assessed the ecological model values. The ecosystem model of LEHA was composed of eleven metrics such as biological parameters($B_p$), physical parameters($P_p$), and chemical parameters($C_p$), and determined the rank of ecological health by the criteria. The variables of $B_p$ were metrics of % sensitive species($M_2$, NMS) and insectivore species($M_5$, % $I_n$), which decrease as the water quality degradates, and these metric values were low as 1.5% and 32.4%, respectively. In contrast, the proportions of tolerant species and omnivore species as the other $B_p$ parameters were 43% and 62%, respectively, which indicate a degradation and disturbance of the ecosystem. Riparian vegetation coverage($M_9$, % $V_c$) as a variable of $P_p$, were higher in the 2nd than 1st survey, and decreased toward the dam site from the headwaters. This was due to a habitat simplification(modifications) by frequent bottom dredging of sand and rocks. The variables of $C_p$ were two metrics of specific conductivity($M_{10}$, $C_I$) as an indicator of ionic contents(cations and anions) and the Trophic State Index(TSI) based on chlorophyll-a($M_{11}$, $TSI_{CHL}$) as an indicator of trophic state. These metric values of $C_p$ had high temporal variations, but low spatial variations on the main axis of the reservoir along with the ecological health of a good condition. The environmental impact assessments using the LEHA multi-metric model indicated that the model values of LEHA averaged 30.7 in 1st survey(fair - poor condition) vs. 28 in 2nd survey(poor condition), indicating a temporal variation of the ecological health. The model values of LEHA showed a minimum(28) in the lacustrine zone(S5) and ranged from 29 to 30 in the other locations sampled, indicating a low longitudinal variation. Overall, environmental impact assessments, based on LEHA model, suggest that chemical water quality conditions were in good, but biological conditions were disturbed due to habitat modifications by frequent dredgings in the system.