• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.639-647
• /
• 2019

A realistic numerical simulation technology using a Lagrangian Fluid-Structure Interaction (FSI) model was combined with a fracture algorithm to predict the fluid-ice-structure interaction. The failure of ice was modeled as the tensile fracture of elastic material by applying a novel FSI model based on the Moving Particle Semi-implicit (MPS) method. To verify the developed fracture algorithm, a series of numerical simulations for 3-point bending tests with an ice beam were performed and compared with the experiments carried out in an ice room. For application of the developed FSI model, a dropping water droplet hitting a cantilever ice beam was simulated with and without the fracture algorithm. The simulation showed that the effects of fracture which can occur in the process of a FSI simulation can be studied.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.363-367
• /
• 2011

In this paper, friction coefficients between ices and model ship were studied in order to predict the resistance of ice. The friction coefficient is a dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together. The coefficient of friction depends on the materials, roughness on surface, lubrication, etc. We tested and analyzed the friction coefficient for the development of the test methodology. The friction coefficient for ice model test is very dominant to predict the ship performance, so every ice tank uses their own painting technique. In this study, the friction coefficient with changing the moving speed of ice was studies by using a flat plates which were made by the MOERI's paining technique and the basic research for the developing the paining methodology in the MOERI ice model basin was carried out.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.43-49
• /
• 2006

The hull form of icebreaking tanker depends on the trade route and ice characteristic. The hull form has to be designed for icebreaking concept if the vessel is operating in heavy ice and also the hull from has to be optimized for general tanker when the ship is operating in ice-free ocean. This paper presents comparison of ship resistance in pack ice, level ice and open water. Four ships are used to compare the resistance characteristic. One is conventional tanker and three ships are icebreaking tankers. The ice model test was carried out at the IOT (Institute for Ocean Technology, Newfoundland, Canada) and open water test was performed at 55MB (Samsung Ship Model Basin). The ice resistance of conventional tanker was predicted by Colbourne's method. The resistance of open water, pack ice and level ice are compared and discussed. The best hull form of icebreaker is not good in open water performance compare to conventional tanker. This result explains that the hull form of icebreaker and normal tanker have to compromise when the ship is operated in ice and ice-free condition. The result of this paper gives a guide for icebreaking tanker design.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.394-405
• /
• 2020

To assess the station-keeping performance of floating structures in the Arctic region, the ice load should be considered along with other environmental loads induced by waves, wind, and currents. However, present methods for performance evaluation in the time domain are not effective in terms of time and cost. An ice load generation module is proposed based on the experimental data measured at the KRISO ice model basin. The developed module was applied to a time domain simulation. Using the results of a captive model test conducted in multiple directions, the statistical characteristics of ice loads were analyzed and processed so that an ice load corresponding to an arbitrary angle of the structure could be generated. The developed module is connected to commercial dynamic analysis software (OrcaFlex) as an external force input. Station-keeping simulation in the time domain was conducted for the same floating structure used in the model test. The mooring system was modeled and included to reflect the designed operation scenario. Simulation results show the effectiveness of the proposed ice generation module and its application to station-keeping performance evaluation. Considering the generated ice load, the designed structure can maintain a heading angle relative to ice up to 4°. Station-keeping performance is enhanced as the heading angle conforms to the drift direction. It is expected that the developed module will be used as a platform to verify station-keeping algorithms for Arctic floating structures with a dynamic positioning system.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.478-483
• /
• 2012

The speed performances of ice sea trial on the Arctic(2010 & 2011) area were shown different results depend on the ice floe size. Penetration phenomena of level ice was not happened on medium ice floe and tore up by the impact force because the mass of medium ice floe is similar to the mass of Araon which is Korean ice breaking research vessel and did not shut up by the ice ridge or iceberg. The sea trial on the Amundsen sea was performed at the big floe which is classified by WMO(World Meteorological Organization). Three measurements of ice properties and five results of speed trial were obtained with different ice thicknesses and engine powers. To evaluate speed of level ice trial and model test results at the same ice thickness and engine power, the correction method of HSVA(Hamburg Ship Model Basin) was used. The thickness, snow effect, flexural strength and friction coefficient were corrected to compare the speed of sea trial. The analyzed speed at 1.03m thickness of big floe was 5.85 knots at 10MW power and it's 6.10 knots at 1.0m ice thickness and the same power. It's bigger than the results of level ice because big floe was also slightly tore up by the impact force of vessel based on the observation of recorded video.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.120-125
• /
• 2004

There are very few numbers of 115K FPP (Fixed Pitch Propulsion) Tankers for the Baltic ice class IA because the minimum power requirement of FMA (Finish- Swedish Maritime Association) needs quite large engine power and the 40 m Beam is out of calculation range of FMA minimum power requirements. The shipyard has no choice except to increase the engine power to satisfy FMA minimum power requirement Rule. And the operation cost, efficiency of hullform and its building cost are not good from the ship owners' point of view To solve this problem, the experience of ice breaking tanker development and the ice tank test results were adopted. The main idea to reduce the ice resistance is by reducing waterline angle at design load waterline. The reason behind the main idea is to reduce the ice-clearing force. Two hull forms were developed to satisfy Baltic Ice class IA. Two ice tank tests and one towing tank test was performed at MARC (Kvaener-Masa Arctic Research Center) and SSMB (Samsung Ship Model Basin) facilities, respectively. The purpose of these tests was to verify the performance in ice and open water respectively The hull form 2 shows less speed loss compared to Hull form 1 in open water operation but hull form 2 shows very good ice clearing ability. finally the Hull Form 2 satisfying Baltic ice class IA. The merit of this hull form is to use the same engine capacity and no major design changes in hull form and other related designs But the hull structure has to be changed according to the ice class grade. The difference in two hull form development methods, ice model test methods and analysis methods of ice model test will be described in this paper.

• 대한조선학회논문집
• /
• 제55권6호
• /
• pp.497-504
• /
• 2018

Platform Support Vessels operated in the Arctic Ocean support diverse operations of offshore plant in the sea, and the PSV is also needed to support works to exploit the oil and gas in the Arctic Ocean. Both of the ice breaking and the open sea performance have been considered together to secure the enhanced operational performance at the harsh environment in the Arctic Ocean and the open sea as well. In this study, One of the design requirements of a PSV is to guarantee continuous icebreaking performance with 3 knots at 1 m thickness of level ice, where the design draft is 7.5m and the engine power is 13 MW. Three hull forms were designed, and the ice resistance based on empirical formulas was estimated to select the initial hull form having an outstanding performance. The full scale performance of the designed hull forms was predicted by the ice model test conducted in the ice model basin of Korea Research Institute of Ships & Ocean Engineering(KRISO). The analysed results show that the selected hull form satisfies the above design requirement.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.137-137
• /
• 2021

In this study we aimed to enhance streamflow prediction skill of a land-surface hydrological model, WRF-Hydro, over one of the snow dominated catchments lies in Himalayan mountainous range, Astore. To assess the response of the Himalayan river flows to climate change is complex due to multiple contributors: precipitation, snow, and glacier melt. WRF-Hydro model with default glacier module lacks generating streamflow in summer period but recently developed WRF-Hydro-CROCUS model overcomes this issue by melting snow/ice from the glaciers. We showed that by implementing WRF-Hydro-CROCUS model over Astore the results were significantly improved in comparison to WRF-Hydro with default glacier module. To constraint the model with the observed streamflow we chose 17 sensitive parameters of WRF-Hydro, which include groundwater parameters, surface runoff parameters, channel parameters, soil parameters, vegetation parameters and snowmelt parameters. We used Dynamically Dimensioned Search (DDS) method to calibrate the daily streamflow with the Nash-Sutcliffe efficiency (NSE) being greater than 0.7 both in calibration (2009-2010) and validation (2011-2013) period. Based on the number of iterations per parameter, we found that the parameters related to channel and runoff process are most sensitive to streamflow. The attempts to address the responses of the streamflows to climate change are still very weak and vague especially northwest Himalayan Part of Pakistan and this study is one of a few successful applications of process-based land-surface hydrologic model over this mountainous region of UIB that can be utilized to have an in-depth understanding of hydrological responses of climate change.

• 대한지리학회지
• /
• 제42권2호
• /
• pp.165-176
• /
• 2007

티벳고원의 서쪽, 중부 카라코람의 인더스 강이 지나는 Skardu 근처에서 발견된 약 1.3km의 두께를 보이는 Bunthang 시퀀스의 절대 연대측정을 우주 기원 동위원소인 $^{10}Be$과 $^{26}Al$의 비를 이용해서 측정했으며 약 2백 65만년전에 급격하게 퇴적된 것으로 확인되었다. 이러한 퇴적시기는 지금까지 발견된 가장 오래된 직접적인 빙하활동의 증거로서 이전의 고지자기 연구와도 일치한다. Bunthang 시퀀스는 아래에서부터 빙퇴석, 호성 퇴적물, 하천 퇴적물 그리고 다시 호성 퇴적물로 이루어지며 어떠한 단층운동의 증거도 발견되지 않는 점으로 미루어 볼 때 분지의 생성은 빙하의 하방침식에 의해서 만들어졌으며 빙하의 후퇴와 더불어 proglacial과 paraglacial 프로세스에 의해서 생성된 것으로 판단된다. 이 지역에 있어서 신생대의 활발한 지반 활동은 인더스 강의 구배를 변형시킴으로써 연구지역과 같은 국지적인 호소퇴적층의 활발한 퇴적을 용이하게 하였으며 또한 지반운동과 빙하의 침식에 의한 사면의 불안정성은 이러한 국지적 퇴적 작용을 더욱 촉발시켰을 것으로 판단된다. 이전의 연구와 본 연구의 결과로써 지난 제4기 동안 빙하의 활동이 약해진 것으로 보건데 지난 마지막 빙기 최성기를 정점으로 티벳고원에 커다란 빙상이 존재했다는 가설은 틀린 것으로 보인다. 이 지역에서 제4기 동안의 빙하 활동의 축소는 희말라야 산맥과 카라코람 산맥 중심의 급격한 융기로 인해 Indian monsoon의 유입이 줄어든 것에서 기인한 것으로 추측된다.

• 대한조선학회지
• /
• 제32권4호
• /
• pp.57-63
• /
• 1995

극지개발을 위해서는 극지의 혹독한 자연환경을 대상으로 하는 과학지식과 극지에서 사용되는 특수시설과 장비를 설계, 시공 그리고 운용하는 공학기술이 요구된다. 극지관련 공학기술은 저 온용재료 관련기술, 도로나 교량, 건축물과 같은 극한지 천연자원의 시추와 생산, 수송을 위한 해양구조물과 파이프라인 관련기술, 그리고 얼음의 재료특성에 관한 이론 및 실험으로 크게 구 분할 수 있다. (Table 1). 극지용 구조물과 빙해항행선박 (쇄빙선) 은 일반 해역에서 운용되는 구조물에 비해 형상, 구조강도, 의장, 저온특수설비 등에서 새로운 개념의 기술이 요구되기 때 문에 금후 국내 조선해양산업계가 지향해야 할 고도의 기술집약형 건조물이다. 또한 최근 들어 국내에서도 시베리아 천연자원의 해상운송을 위해 빙해역을 운항할 수 있는 유조선이나 일반 화물선을 확보해야할 필요성이 대두되고 있으며, 또한 국내 조선업계의 생산기술이 비약적으로 발전함에 따라 외국으로부터의 빙해항행선박의 수주도 이루어지고 있으나 아직 이들 선박의 설계를 위한 독자적인 기술은 미흡한 현실이다. 극지개발은 이론적 접근과 함께 실험에 의한 신뢰성 있는 자료를 축적해야 한다. 이를 위해서는 빙해수조(,ice model basin)의 건조나 빙역학 실험을 위한 냉동실험실 (cold room)의 건립을 위한 초기투자가 절실히 요구되며 산업계의 수 요에 따른 포괄적인 산학협동연구가 진행되어야 할 필요가 있다. 빙해수조와 냉동실험실은 빙 해역에 직접 접하지 않은 국가에서 극지공학 연구에 참여하기 위한 필수적인 시설인데 table 2에 대표적인 빙해수조의 설치장소와 규모에 대하여 정리하였다. 이 글은 우리 나라가 쉽게 접할 수 없는 극지환경을 이해하고 가까운 장래에 예상되는 수주경쟁에 대비하여, 국내외의 극지개발 동향을 분석하고 이에 대한 국내의 극지관련 연구의 현황과 앞으로의 전망을 살펴보기 위하여 준비된 것이다. 이 글에서는 극지공학 일반보다는 조선해양분야에 관련된 내용만으로 국한한다.