• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4B
• /
• pp.243-251
• /
• 2012

To investigate the characteristics of rip current occurring at Haeundae beach, observations obtained from a buoy and a CCTV were analyzed and numerical experiments were conducted. During observed rip-current events, the CCTV images showed that a couple of wave-trains, which are close to regular waves with slightly different directions, propagated to the beach, and wavelet analyses of data from the buoy showed very narrow-banded spectra with a peak frequency. From the evidences, it was inferred that a known mechanism of generating rip current due to the nodal line area of honeycomb-patterned wave crest was one of the significant factors of rip current occurrences of Haeundae beach. The mechanism has been explained by the following: When two wave-trains with slightly different directions propagate to a beach, wave crests of the incident wave-trains form honeycomb pattern due to nonlinear interaction. The nodal lines of honeycomb pattern are developed in the cross-shore direction. And longshore currents flow toward the nodal line area which has very low wave energy. Consequently their mass flux is expelled through the area toward the sea direction. To confirm the generation, numerical experiments were performed using a nonlinear Boussinesq equation model. In the cases with two incident wave-trains with slightly different directions and with a monochromatic wave propagating over a submerged shoal, it was seen that the honeycomb pattern of wave crests was well developed, and thus rip currents were evolved along the nodal lines.

• Land and Housing Review
• /
• v.7 no.1
• /
• pp.19-29
• /
• 2016

This study proposes the big data policy and case studies in Korea and the application of land and housing of spatial big data to excavate the future business and to propose the spatial big data based application for the government policy in advance. As a result, at first, the policy and cases of big data in Korea were evaluated. Centered on the Government 3.0 Committee, the information from each department of government is being established with the big-data-based system, and the Ministry of Land, Infrastructure, and Transport is establishing the spatial big data system from 2013 to support application of big data through the platform of national spatial information and job creation. Second, based on the information system established and administrated by LH, the status of national territory information and the application of land and housing were evaluated. First of all, the information system is categorized mainly into the support of public ministration, statistical view, real estate information, on-line petition, and national policy support, and as a basic direction of major application, the national territory information (DB), demand of application (scope of work), and profit creation (business model) were regarded. After the settings of such basic direction, as a result of evaluating an approach in terms of work scope and work procedure, the four application fields were extracted: selection of candidate land for regional development business, administration and operation of rental house, settings of priority for land preservation, and settings of priority for urban generation. Third, to implement the application system of spatial big data in the four fields extracted, the required data and application and analytic procedures for each application field were proposed, and to implement the application solution of spatial big data, the improvement and future direction of evaluation required from LH were proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.79-87
• /
• 2015

This paper proposes a floating-type wave energy conversion system that consists of a mechanical part (yo-yo vibrating system, motion rectifying system, and power transmission system) and electrical part (power generation system). The yo-yo vibrating system, which converts translational input to rotational motion, is modeled as a single degree-of-freedom system. It can amplify the wave input via the resonance phenomenon and enhance the energy conversion efficiency. The electromechanical model is established from impedance matching of the mechanical part to the electrical system. The performance was analyzed at various wave frequencies and damping ratios for a wave input acceleration of 0.14 g. The maximum output occurred at the resonance frequency and optimal load resistance, where the power conversion efficiency and electrical output power reached 48% and 290 W, respectively. Utilizing the resonance phenomenon was found to greatly enhance the performance of the wave energy converter, and there exists a maximum power point at the optimum load resistance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.95-101
• /
• 2009

Random numbers are used in many sorts of applications. Some applications, like simple software simulation tests, communication protocol verifications, cryptography verification and so forth, need various levels of randomness with various process speeds. In this paper, we propose a fast pseudorandom generator module for embedded systems. The generator module is implemented in hardware which can run in two modes, one of which can generate random numbers with higher randomness but which requires six cycles, the other providing its result within one cycle but with less randomness. An ASIP (Application Specific Instruction set Processor) was designed to implement the proposed pseudorandom generator instruction sets. We designed a processor based on the MIPS architecture,, by using LISA, and have run statistical tests passing the sequence of the Diehard test suite. The HDL models of the processor were generated using CoWare's Processor Designer and synthesized into the Dong-bu 0.18um CMOS cell library using the Synopsys Design Compiler. With the proposed pseudorandom generator module, random number generation performance was 239% faster than software model, but the area increased only 2.0% of the proposed ASIP.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.4
• /
• pp.9-20
• /
• 2011

Future warfare paradigm is changing to network-centric warfare and effects-based operations. In order to find first and strike the enemy in the battlefield, friendly unit requires real-time target acquisition, intelligence collection, accurate situation assessment, and timely decision. The rapid development in advanced sensor technology and wireless networks requires a significant change in operational concepts of the battlefield surveillance. In particular, the introduction of a battlefield surveillance sensor network system is a big challenge to the ground forces which have lack of automated information collection assets. Therefore this paper proposes an ontology-based context-aware framework for the battlefield surveillance sensor network system which is needed for early finding the enemy and visualizing the battlefield in the ground force operations. Compared with the performance of existing systems, the one of the proposed framework has shown highly positive results by applying the context systems evaluation method. The framework has also proven to be satisfactory by the structured evaluation method using device collaboration. Since the proposed ontology-based context-aware framework has a lot of advantages in terms of scalability and reusability, the ground force's reconnaissance and surveillance system can be widely applied to expand in the future. And, ontology-based model has some weak points such as ontology data size, processing time, and limitation of network bandwidth. However, these problems can be resolved by customizing properly to fit the mission and characteristics of the unit. Moreover, development of the next-generation communication infrastructure can expedite the intelligent surveillance and reconnaissance service and may be expected to contribute greatly to expanding the information capacity.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.59-64
• /
• 2017

There are three sorts of voices of female vocalists: soprano, mezzo-soprano, and contralto according to the transliteration. Among them, the soprano has the highest vocal range. Since the voice is generated through the human vocal tract based on the voice generation model, it is greatly influenced by the vocal tract. The structure of vocal organs differs from person to person, and the formants characteristic of vocalization differ accordingly. The formant characteristic refers to a characteristic in which a specific frequency band appears distinctly due to resonance occurring in each vocal tract in the vocal process. Formant characteristics include personality that occurs in the throat, jaw, lips, and teeth, as well as phonological properties of phonemes. The first formant is the throat, the second formant is the jaw, the third formant and the fourth formant are caused by the resonance phenomenon in the lips and the teeth. Among them, pronunciation is influenced not only by phonological information but also by jaws, lips and teeth. When the mouth is small or the jaw is stiff when pronouncing, pronunciation becomes unclear. Therefore, the higher the accuracy of the pronunciation characteristics, the more clearly the formant characteristics appear in the grammar spectrum. However, many soprano singers can not open their mouths because their jaws, lips, teeth, and facial muscles are rigid to maintain high tones when singing, which makes the pronunciation unclear and thus the formant characteristics become unclear. In this paper, in order to confirm the accuracy of the pronunciation characteristics of soprano singers, the experimental group was selected as the soprano singers A, B, C, D, E of Korea and analyzed the grammar spectrum and conducted the MOS test for pronunciation recognition. As a result, soprano singer B showed a clear recognition from F1 to F5 and MOS test result showed the highest recognition rate with 4.6 points. Soprano singers A, C, and D appear from F1 to F3, but it was difficult to find formants above 2kHz. Finally, the soprano singer E had difficulty in finding the formant as a whole, and MOS test showed the lowest recognition rate at 2.1 points. Therefore, we confirmed that the soprano singer B, which exhibits the most distinct formant characteristics in the grammar spectrum, has the best pronunciation accuracy.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.221-232
• /
• 2016

The impact of the recent small business start-up competition in the market, has become overheated. It is effected by early retirement of a generation of youth employment. This study is a study on the impact of SEMAS(Small Enterprise and Market Service) system operating of the funding system, education support programs, and consulting support system on the business performance of small business owners. It has surveyed 272 business owners, in Gyeongsangnam-province. The study includes specific support system for usage frequency and satisfaction and conducted from January 2013 to September 2015. In addition, it analyzes characteristic that motivation, business model, item, owner's experience, sales and demographic by small business owner. Analysis results, the management performance of small business that uses financial support system and consulting support system is shown to be high. But education support system is the opposite effect. As a result, the management performance is related to industry experience. Therefore education support system need to be reorganized to the support depends on the development stage. This study was conducted to help small business owners entered the start-up market and a decision-making person with a policy decision.

• The Korean Journal of Malacology
• /
• v.32 no.3
• /
• pp.185-188
• /
• 2016

PANM-DB (version 1.0) was constructed as a web-based interface for the analysis and annotation of Next-Generation Sequencing (NGS) data of Mollusca, Arthropoda, and Nematoda. The database collected the sequences of Protostomes (Mollusca, Arthropoda, and Nematoda) from the NCBI Taxonomy Browser, and the same were compiled in a multi-FASTA format and stored using the formatdb program. This improved the processing of the RNA-seq sequences in terms of speed and hit percentage. PANM-DB has been successfully used for the transcriptome annotation of butterfly, land snail, and other commercial mollusca. We have improved the database by updating the same with new sequences and version 2.0 contains a total of 7,571,246 protein sequences (two times more as compared to version 1.0). Furthermore, the updated version contains the Cephalopoda database. The constructed web interface is available that independently analyses following these updates that is an improvement of the mollusks BLAST server. The updated version of PANM-DB will be helpful for the analysis of the NGS based sequencing data of non-model species, especially Mollusca, Arthropoda, Nematoda.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.305-314
• /
• 2017

Ocean wave energy harvesting is still too expensive despite developing a variety of wave energy converter (WEC) devices. For the cost-effective wave energy harvesting, it can be an effective measure to use existing breakwaters or newly installed breakwaters for both wave control and energy harvesting purposes. In this study, we investigated the functionality of both breakwater and wave-power generator for the oscillating water column (OWC)-type wave energy converter (WEC) installed in a pneumatic floating breakwater, which was originally developed as a floating breakwater. In order to verify the performance of the breakwater as a WEC, the air flow velocity from air-chamber to WEC has to be evaluated properly. Therefore, air flow velocity, wave transformation and motion of floating structure was numerically implemented based on BEM from linear velocity potential theory without considering the compressibility of air within the chamber. Air pressure, meanwhile, was assumed to be fluctuated by the motions of structure and the water level change within air-chamber. The validity of the obtained values can be determined by comparing the previous results from the numerical analysis for different shapes. Based on numerical model results, wave transformation characteristics around OWC system mounted on the fixed and floating breakwaters, and motions of the structure with air flow velocities are investigated. In summary, all numerical results are almost identical to the previous research considering air compressibility. Therefore, it can be concluded that this analysis not considering air compressibility in the air chamber is more efficient and practical method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.181-186
• /
• 2015

It is necessary to develop an effective waste salt treatment technology for the minimization of radioactive waste generation from the pyroprocessing of spent nuclear fuel. For this reason, the separation characteristics of NdCl₃ from LiCl-KCl eutectic salt in a reactive distillation process using Li₂CO₃ or K₂CO₃ were observed. NdCl₃ was converted into oxychloride (NdOCl) or oxide (Nd₂O₃) in the reaction model between NdCl₃ and the carbonates using HSC-Chemistry, and this result was confirmed in the reactive distillation test of the LiCl-KCl-NdCl₃ system using the carbonates. Based on these results, the reactive distillation process conditions were determined to separate NdCl₃ into an oxide form (Nd₂O₃) which can be easily fabricated into a final waste form.