• Korean Journal of Remote Sensing
• /
• v.34 no.5
• /
• pp.709-720
• /
• 2018

In order to optimize the evaluation of biomass in crop monitoring, accurate and timely data of the crop-field are required. Evaluating above-ground biomass helps to monitor crop vitality and to predict yield. Unmanned Aerial Vehicle (UAV) imagery are being assessed for analyzing within field spatial variability for agricultural precision management, because UAV imagery may be acquired quickly during critical periods of rapid crop growth. This study reports on the development of remote sensing techniques for evaluating the biomass of winter crop. Specific objective was to develop statistical models for estimating the dry weight of barley and wheat using a Excess Green index ($E{\times}G$) based Vegetation Fraction (VF) and a Crop Surface Model (CSM) based Plant Height (PH) value. As a result, the multiple linear regression equations consisting of three independent variables (VF, PH, and $VF{\times}PH$) and above-ground dry weight provided good fits with coefficients of determination ($R^2$) ranging from 0.86 to 0.99 with 5 cultivars. In the case of the barley, the coefficient of determination was 0.91 and the root mean squared error of measurement was $102.09g/m^2$. And for the wheat, the coefficient of determination was 0.90 and the root mean squared error of measurement was $110.87g/m^2$. Therefore, it will be possible to evaluate the biomass of winter crop through the UAV image for the crop growth monitoring.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.173-178
• /
• 2015

In these days, the world has been increasing the development of various underwater vehicles such as ROVs (Remotely operated underwater vehicles) and AUVs (Autonomous underwater vehicles). And the importance of submarine's maneuverability is especially being emphasized. Therefore, accurate values of the derivatives in equations of motion are required to control motion of the submarines. The aims of the present study are to experimentally derive Hydrodynamic derivatives derived by the vertical planar motion mechanism (VPMM) model test, and to estimate vertical dynamic stability was estimated by using the linear hydrodynamic derivatives, the hydrodynamic derivatives of the submarine, which have a high propriety, were provided by using the fourier analysis of measured forces and moments. Furthermore it is confirmed that the experimental derivatives shows well agreement with the theoretical estimations, and the dynamic stability of the submarine was estimated as a good state, which implies that the value is greater than zero.

• The Journal of Society for e-Business Studies
• /
• v.16 no.3
• /
• pp.1-22
• /
• 2011

The purpose of this study is to verify the relationship between expectancy confirmation and continuance usage intention in biometric technology. We extend the continuance usage intention model, TAM and expectation confirmation theory by adding perceived privacy, perceived security and trust. Results was analyzed by using structural equations model. The results show that satisfaction and perceived usefulness have positive effect on continuance usage intention in the bright scenario. Perceived privacy and perceived security are positive factors on perceived usefulness, and perceived privacy is positive effect on perceived security. On the other hand, the respondents who are exposed to the dark scenario have negative effects on the perceived privacy, perceived security and trust. And finally, trust has no significant effect on the perceived usefulness.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.453-466
• /
• 2008

In order to examine the generation mechanism of long ocean waves along the west coast of Korea and to understand the amplification process of the long ocean waves, sea level, atmospheric pressure and wind data observed every minute from 2007 March 29 to 2007 April 1 were analyzed and onedimensional numerical ocean model experiments were performed. An atmospheric pressure jump propagated southeastward from Backryungdo to Yeonggwang along the west coast of Korea with speed of $13{\sim}27\;m/s$ between 2007 March 30 23:00 and 2007 April 1 1:30. Average magnitude of pressure jump was 4.2 hPa. As a moving atmospheric jump propagated from north to south along the coast, long ocean waves were generated and the sea level abnormally rose or fell at Anheung, Kunsan, Wido and Yeonggwang. Average amplitude of sea level rise (or fall) was about 113.6 cm. In a one-dimensional numerical ocean model, nonlinear shallow water equations were numerically integrated and a moving atmospheric pressure jump with traveling speed of 24 m/s was used as an external force. While the atmospheric pressure jump travels over 60 m depth ocean, a long ocean wave is generated. Because the propagation speed of the atmospheric jump is almost equal to that of the long ocean wave, Proudman resonance occurs and the long ocean wave amplifies. As the atmospheric pressure jump moves into the coastal area shallower than 60 m, the speed of the long ocean wave decreases and Proudman resonance effect decreases. However, the amplitude of the long ocean wave increases and wave length becomes shorter because of shoaling effect. When the long ocean wave hits the land boundary, amplitude of the long ocean wave drastically amplifies due to reflection. Data analysis and numerical experiments suggest that the southeastward propagation of an atmospheric pressure jump over the shallow ocean, which is a necessary condition for Proudaman resonance, generated the long ocean waves along the west coast of Korea on 2007 March 31 and the ocean waves amplified due to shoaling effect in the coastal area and reflection at the shore.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.202-216
• /
• 2015

In the narrow water channel, which has been frequently deployed in the artificial canal in the South Korea due to the lack of available land, solitary wave type ship induced waves can occur. In order to test this hypothetical view, we carried out the numerical simulation. Numerical model consists of Navier-Stokes Equations and VOF, and the verification is implemented using the data by PIANC (1987) and the analytical model derived in this study. It was shown that numerically simulated front wave height are much larger than the one by PIANC (1987), and the fluctuation of free surface near the channel bank persists much longer (around 20s). For the case of stern waves, numerically simulated wave height are somewhat smaller than the data by PIANC (1987). These results seriously deviates from the general characteristics of ship induced waves observed in the wide water channels, and leads us to conclude that ship induced waves is severely affected by the width of water channel. It was also shown that the currents from the channel banks toward a ship, and currents from the ship toward the channel banks are alternatively occurring due to reflection at the channel banks. The velocity of currents reaches its maximum at 0.90 m/s, and these values are sustained through the entire depth. which implies that severe scourings at the channel bottom can be underway.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.65-70
• /
• 1987

In Girder to measure the pressure and weight decrease of drying sample during the vacuum drying process of food, sensing devices were designed and constructed with strain gauge. Microcomputer based vacuum drying system was made up of these devices interfaced to apple II microcomputer. The electrical output signal from vacuum sensor which constituted with Bourdon tube whereon strain gauge attached were digitalized and input to microcomputer through the MC 6821 interface I.C. chip. The relationship between read-out digital value (D) from microcomputer and readings of vacuum gauge (P, mmHg) was P=-146.136+3.620D'(r=0.9994) The pressure control of vacuum dryer was successfully conducted in the range of $400{\sim}600\;mmHg$ accuracy. The digitalized load cell output (D) could be correlated with the real weight (W, g) as W=-14,000+0.585D (r=0.9998) Drying curves of green red pepper under $64^{\circ}C$, $400{\sim}600\;mmHg$ was similar to those of red pepper and differently affected by the degree of vacuum pressure but was varied according to their shape (cut or whole). Moisture movement of green red pepper during the vacuum drying process was fitted to Page model. The empirical equations obtained were $M-M_e/M_o-M_e={\exp}\;(-0.0673{\theta}^{1.177})$ and $M-M_e/M_o-M_e={\exp}\;(-0.0655\;{\theta}^{1.477})$ for whole and cut green red pepper, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.97-106
• /
• 2011

Purpose: This review article was written to theoretically compare the depressing force (pressure, adhesion) to the cornea between when the spherical lenses were being tightly and flat fitted. Methods: Mathematical equations and their numerical solution programs (model) were formulated to calculate the depressing (adhesion) force to the cornea by both the tightly and flat fitted contact lenses. Based on this proposed model the effects of parameters characterizing a contact lens such as BCs, diameters, edge shape and corneal shape (ratio of long and short corneal axis, p) on the depressing force to the cornea were predicted/analyzed in both tightly and flat fitting regimes. Results: Corneal adhesion increased as the corneal p-value increased. Adhesion increase caused by the increased p-value was much larger in flat fitted case than in tight fitted one. Corneal adhesion reduced abruptly as the BC increased in flat fitting regimes while the adhesion rise was insignificant in tight fitting ones. Reduction in corneal adhesion due to lens-size increase was predicted to be insignificant in both tight and flat fitting regimes. Both the lens edge shape (edge angle) and thickness were relevant only in tight fitting regime. Corneal adhesion increased as the increased with tight-fitted lenses. As the thickness of tight fitted lenses increased, corneal adhesion inversely decreased. Conclusions: The two most significantly affecting the depressing force to cornea were found to be the degree of corneal bending toward the periphery and the BCs of lenses.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.23-29
• /
• 2003

Transonic two-phase flow of Saturated humid air, in which relative humidity is 100%, with various condensation processes around thin airfoils is investigated. The study uses an extended transonic small-disturbance(TSD) model of Rusak and Lee [11, 12] which includes effects of heat addition to the flow due to condensation. Two possible limit types of condensation processes are considered. In the nonequilibrium and homogeneous process, the condensate mass fraction is calculated according to classical nucleation and droplet growth rate models. In the equilibrium process, the condensate mass fraction is calculated by assuming an isentropic process. The flow and condensation equations are solved numerical1y by iterative computations. Results under same upstream conditions describe the flow structure, field of condensate, and pressure distribution on airfoil's surfaces. It is found that flow characteristics, such as position and strength of shock waves and airfoil’s pressure distribution, are different for the two condensation processes. Yet, in each case, heat addition as a result of condensation causes significant changes in flow behavior and affects the aerodynamic performance of airfoils.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.5-13
• /
• 2008

Purpose: This review article was written to investigate what kind of forces are acting on the contact lens fitted on the cornea and its subsequent motion. Methods: A capillary action-induced force develops in the tear layer between the lens and cornea, which leads to the restoring force due to difference in layer thickness according to lens rotation. The characteristics of the lens movement can be determined by the various factors such as friction between eyelid and lens, acceleration force based on blinking and the restoring force incorporated with the viscous damping force. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped motion of lenses. The model predicts the time dependence of lenses during and after the blink varying the BC, blink period and eyelid pressure. Results: It was found that both the blink period and lid pressure increases the movement increases because of the enhanced lid friction. As the BC increases the viscous damping reduces due to the lacrimal layer's increase which resulted in the enhanced lens motion. After blink the lens illustrates the damped oscillation because of the restoring force by the increased lacrimal layer thickness and reduced viscous resistance. The time for the lens to return to the equilibrium shortens as the BC increase because of the resistance reduction. Conclusions: The movement of the contact lens is governed by the characteristics of the lacrimal layer between the lens and cornea as well as the lid blink.

• Journal of Distribution Science
• /
• v.11 no.5
• /
• pp.43-53
• /
• 2013

Purpose - The purpose of this study is to analyze the effectiveness of customer relationship management (CRM) support policies for facilitating traditional markets, especially with respect to customer acquisition and maintenance, and to investigate the factors affecting CRM. Research design, data, and methodology - We analyzed the CRM efficiency of traditional markets in 16 cities and provinces in Korea on the basis of DEA analysis and Malmquist productivity analysis. The DEA model calculates a ratio of the weighted mean of various inputs to the weighted mean of various outputs and measures the efficiency of a specific decision making unit (DMU), which is compared to the reference group that has a similar input-output structure. The input variables are coupon, event, parcel service, premiums, while is the number of customers per day. Further, through regression analysis, we analyzed CRM-related factors affecting traditional markets' customer appeal and revenue growth. Results - We obtained the results of the efficiency of traditional markets in 16 provinces. The traditional markets in Seoul, Busan, and Jeju were found to be efficient in a model CCR that used the number of customers per day as an output variable, while Chungbuk, Jeonbuk Province, and According to the results of the DEA analysis and Malmquist productivity analysis, large cities such as Seoul, Busan, and Jeju showed efficiency in CRM-related investment businesses in traditional markets for attracting customers. The Malmquist analysis results confirmed that the productivity of traditional markets increased from 2008 to 2010. The results of the regression analysis revealed that the "customer acquisition/maintenance factor" and the "offering of customer convenience facility factor" were significant to the daily average number of customers, which is a dependent variable. The results of the test with the mediating variable, "number of customers," and the final dependent variable, "sales revenue," were rejected. However, the variable "customer acquisition /maintenance" was found to affect sales revenue positively. Conclusions - It is necessary to enhance the business not only for promotional activities to attract customers, but also to strengthen customer relationships among CRM businesses, such as through the management of key customers. The regression analysis results showed that CRM businesses have yet to produce an increase in sales revenues in traditional markets. Therefore, to help customers who visit traditional markets to keep buying products, it is necessary to prepare various investment methods and provide support to improve "customer loyalty." This study has a limitation in terms of CRM-related statistics. Therefore, in the future, it is necessary to conduct a survey of customers who use traditional markets to analyze the markets by type and size as well as the CRM-related factors. Based on the analysis, we will try to perform a variety of statistical analyses, including structural equations.