• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.224-229
• /
• 1999

이질적인 네트워크를 기반으로한 분산 객체지향 환경에서 대규모의 시스템 증가로 인한 분산객체들의 관리의 복잡성을 해결하기 위하여 분산객체들간의 효과적인 상호협력정책들이 필요하게 되었다. 따라서 본 논문에서는 트레이더의 설비, 목적과 목적의 가중치에 따른 세가지 다른 상호협력 모델(단순협력(light weight trader), 단순교섭(simple negotiation), 연합(federation))을 살펴보므로써 클라이언트에게 보다 나은 서비스 속도 제공 및 선택의 폭을 넓히기 위한 트레이딩 상호협력을 제안했다.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.381-390
• /
• 2008

This paper proposed a conceptual design of bascule bridge, which is a new kind of movable bridge with an aim of reducing the weight of superstructure. Compared with the traditional bascule bridge, the light bascule bridge chooses cable-stayed bridge with inclined pylon as its superstructure; therefore, the functions of balance-weight and structure will fuse into one. Otherwise, it adopts moving counterweight to adjust its center of gravity (CG) to open or close the bridge. In order to lighten the superstructure, it uses contact springs to auxiliary retract, and intelligent prestressing system (IPS) to control the main girder's deformation. Simultaneously the vibration control scheme of structure is discussed. Starting from establishing the mechanical model of bridge, this article tries to analyze the conditions that the design parameters of structure and attachments should satisfy to. After the design procedure was presented, an example was also adopted to explain the primary design process of this kind bridge.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.773-775
• /
• 2011

We analysed privacy, attack model and vulnerability with light-weight RFID System. A specific system's vulnerability depends on its implementation and the applied countermeasures. We can build an RFID system with a satisfactory security level even in a high-risk application area. To do so, however, we must pay attention to the implementation of proportional security measures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.26-31
• /
• 2002

본 연구는 초고속 지능형 라인센터 개발에 관한 것으로서 1 차 년도 볼 스크류 방식의 시험모델에 대한 종합 검토 결과를 바탕으로 2 차 연도에는 리니어 모터를 채택한 라인센터의 시제품 설계에 있어서 고속화를 위한 방안을 모색하고 컴팩트한 경량의 구조를 지향하는 라인 센터 구조물을 설계하였고, 3 차 년도에는 라인센터의 제작 및 종합적인 시험 평가를 통하여 상품화 모델을 정립하고자 하였다.

• 한국시뮬레이션학회논문지
• /
• 제16권3호
• /
• pp.19-28
• /
• 2007

무기체계의 개념설계 단계에서부터 체계 사양 도출 및 관 요구분석의 효과적인 수행을 위한 교전수준(Engagement Level)의 M&S(Modeling & Simulation) 적용을 위해 수중무기체계인 어뢰체계의 표준모델을 구성하였다. 추후 수중 교전 시뮬레이션에 공통적으로 사용될 수 있도록 재사용성(Reusability)과 상호운용성(Interoperability) 및 공학 모델로의 확장성을 고려하였다. 어뢰체계의 표준에 대하여 모델의 WBS(Work Breakdown Structure)를 정의하고 각 하부 모델들 사이의 정보 흐름을 구체화하여 모델간의 입력 및 출력 파라미터를 정의하였다. 어뢰 모델링은 WBS의 하부 모델 중에서 초기입력 장치, 수중운동, 전투탄두, 음향탐지, 유도제어, 추진동력에 대해서 모델링 하였으며, 중어뢰와 경어뢰의 운용상의 차이점을 구분하여 모델링하였다. 표준모델은 가능한 공학 수준 M&S와 동일한 구조를 갖도록 하였으며 앞으로 정립될 V&V(Verification & Validation) 절차에 따라 교전 시뮬레이션에 사용될 다른 체계들과 검증될 것이다.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.48-55
• /
• 2023

In this study, on the structure simulation for manufacturing a high strength/light weight 48V battery housing for a mild hybrid vehicle was conducted. Compression analysis was performed in accordance with the international safety standards(ECE R100) for existing battery housings. The effect of plastic materials on compressive strength was analyzed. Three models of truss, honeycomb and grid rib for the battery housing were designed and the strength characteristics of the proposed models were analyzed through nonlinear buckling analysis. The effects of the previous existing rib, double-sided grid rib, double-sided honeycomb rib and double-sided grid rib with a subtractive draft for the upper cover on the compressive strength in each axial direction were examined. It was confirmed that the truss rib reinforcement of the battery housing was very effective compared to the existing model and it was also confirmed that the rib of the upper cover had no significant effect. In the results of individual 3-axis compression analysis, the compression load in the lateral long axis direction was the least and this result was found to be very important to achieve the overall goal in designing the battery housing. To reduce the weight of the presented battery housing model, the cell molding method was applied. It was confirmed that it was very effective in reducing injection pressure, clamping force and weight.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2020년도 춘계학술발표대회
• /
• pp.483-486
• /
• 2020

Age estimation and gender classification for human is a classic problem in computer vision. Almost research focus just only one task and the models are too heavy to run on low-cost system. In our research, we aim to apply multitasking learning to perform both task on a lightweight model which can achieve good precision on embedded system in the real time.

• 항공우주기술
• /
• 제6권1호
• /
• pp.35-44
• /
• 2007

본 연구에서는 선미익을 채용한 경항공기인 반디호의 수출형 시제기에 대한 플러터 해석을 수행하였다. 내부 하중 생성용 유한요소모델을 기초로 강성 모델을 작성하였고, 중량 통제를 위한 중량 DB에 근거하여 중량 모델을 작성하였다. 공력모델은 DLM을 이용하였다. 작성된 모델을 이용하여 1차 플러터 해석을 수행하였다. 이를 토대로 주요 진동 모드를 구분해 내고, 지상진동시험을 수행하여 진동 특성을 획득하였다. 획득된 고유진동수를 근거로 유한요소모델의 수정이 이루어졌고 2차 해석이 수행되었다. 해석 결과 주요 플러터 근의 특성을 정리하였다. 가장 중요한 플러터 근은 롤 운동을 갖는 강체 모드와 반대칭 주익 피칭 모드의 연계 모드로 판명되었다.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.1-5
• /
• 2019

In this study, micro cellular injection molding of automobile head lamp housing with uneven thickness structure was performed to obtain improvement on deformation and light-weight of the part. The thickness of the presented model was uniformly modified to control the deformation of the molded part. In order to maximize the lightweight ratio, the model having an average thickness of 2.0 mm were thinly molded to an average thickness of 1.6 mm. GFM(Gas Free Molding) and CBM(Core Back Molding) technology were applied to improve the problems of the conventional foam molding method. Equal Heat & Cool system was also applied by 3D cooling core and individual flow control system. Warpage of the molded parts with even cooling was minimized. To improve the mechanical properties of foamed products, complex resin containing nano-filler was used and variation of mechanical properties was evaluated. It was shown that the weight reduction ratio of products with light-weighted injection molding was 8.9 % and the deformation of the products was improved from the maximum of 3.6 mm to 2.0 mm by applying Equal Heat & Cool mold cooling system. Also the mechanical strength reduction of foamed product was less than 12% at maximum.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.92-99
• /
• 2006

Design capability for high safety vehicle with light weight is crucial to enhancing competitive power in vehicle market. The structural foam can contribute to restraining section distortion in body members undergoing bending collapse at vehicle crash. In this study, first, the validation of analysis model including structural foam model for simulating fracture behavior was discussed, and the bending collapse characteristics of five representative section types were analyzed and compared. Next, with changing the laminate foam shape, load carrying capability and absorbed energy were observed. The results suggests a design strategy of body members filled with laminate foam, leading to effectively elevating bending collapse characteristics with weight increase in the minimum.