• Journal of the military operations research society of Korea
• /
• v.15 no.1
• /
• pp.78-94
• /
• 1989

Events that occur within a high 'resolution' combat model often need to be characterized and structured for representation in other models or for detailed analysis purposes. This paper attempts to characterize one of these events, helicopter deaths. The data analyzed for this paper were generated by a high resolution production simulation system, CARMONETTE. The thesis objective is to develop a model to characterize the event of interest, and check the fit of the developed model using a second set of data. The exponential model developed provides not only excellent characterization of Blue helicopter attrition but also sufficient confidence in our results for the purpose of aggregated combat simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.406-412
• /
• 2009

Flight simulation model for helicopter simulator is one of the most important models which affect flight performance and handling quality. It is typical to develop the model based on the raw data and models from the helicopter designers/manufacturers. The approaches in this study were to develop the basic model based on the available resources regarding helicopter operation/maintenance and to tune and validate it based on the flight test results. The basic model was developed with maintenance manuals, flight manuals, analyses, measurements, papers and so on considering that KA-32T data could not be obtained from the manufacturer. The flight test for KA-32T was performed and the reference data for the simulation validation tests were acquired. The flight simulation model was validated to have the fidelity compatible with level C of FAA AC120-63 after comparison and tuning with flight test results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.63.2-63
• /
• 2002

● Introduction ● System Identification ● PD Controller Design ● Verifying the Model & Simulation ● Experiment for Attitude Control ● Results ● Conculsions

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.44-53
• /
• 2009

In this paper, Recursive Least Squares (RLS) and Fourier Transform Regression (FTR) methods for estimating stability and control derivatives of small unmanned helicopter are evaluated together with MMLE technique. Flight data simulated by using a commercial small-scale helicopter model are exploited to estimate the parameters with accuracies for hover and cruise modes. The performances of the system identification methods are also compared by analyzing the responses of the reconstructed systems using estimated derivatives.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.3
• /
• pp.74-83
• /
• 2020

Securing excellent pilots is not only directly linked to the military's improved combat capabilities, but also a way to minimize human and property losses from aircraft accidents. Therefore, a scientific method is needed to diagnose pilot aptitude from the pilot selection process and select those with high accident potential, those who are dropped out of the flight training process, and those who are not suitable for pilot life in advance. Developed countries have implemented pilot aptitude tests to solve these problems early on, but so far, the Korean Army has not introduced a pilot aptitude test system that uses diagnostic tools in the helicopter pilot selection process. Therefore, in this study, scientific diagnostic tools are developed for selecting helicopter pilots, and through this, it is predicted that the number of people who are likely to be dropped out of the training course and who have the potential for accidents will be selected in advance and eliminated in the selection process. In this context, prior research examined the key factors involved in the pilot aptitude test. Through this, the aptitude test items were developed and aptitude tests were conducted on student pilots currently in flight training, and the results of flight training were analyzed.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.154-164
• /
• 2017

This work conducts a validation study for the XH-59A helicopter using a rigid coaxial rotor system in order to establish the techniques of the conceptual design and performance analysis for the lift-offset compound rotorcraft. As a tool for conceptual design and performance analysis, NDARC (NASA Design and Analysis of Rotorcraft) is used for the present study. An assumed mission profile is considered for the conceptual design of the XH-59A. As a validation result of the design, the dimensions and weight of the XH-59A are appropriately designed when compared to the target values since the relative error is less than 0.5%. Then, performance analyses are conducted for the designed XH-59A model with and without auxiliary propulsion in hover and forward flight conditions. The present analyses show good validity since the prediction results compare well with both the flight test and previous analyses. Therefore, the techniques for the conceptual design and performance analysis of the lift-offset compound helicopter are overall considered to be appropriately established. In addition, this study investigates the influence of the lift-offset on the rotor effective lift-to-drag ratio of the XH-59A helicopter with auxiliary propulsion. As a result, the improvement of the rotor effective lift-to-drag ratio can be obtained by appropriately increasing the lift-offset in high-speed flight.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.24-34
• /
• 2007

Closed-loop active twist control of integral helicopter rotor blades is investigated in this paper for reducing hub vibration induced in forward flight. A four-bladed fully articulated integral twist-actuated rotor system has been designed and tested successfully in wind tunnel in open-loop actuation. The integral twist deformation of the blades is generated using active fiber composite actuators embedded in the composite blade construction. An analytical framework is developed to examine integrally twisted helicopter blades and their aeroelastic behavior during different flight conditions. This aeroelastic model stems from a three-dimensional electroelastic beam formulation with geometrical-exactness, and is coupled with finite-state dynamic inflow aerodynamics. A system identification methodology that assumes a linear periodic system is adopted to estimate the harmonic transfer function of the rotor system. A vibration minimizing controller is designed based on this result, which implements a classical disturbance rejection algorithm with some modifications. Using the established analytical framework, the closed-loop controller is numerically simulated and the hub vibratory load reduction capability is demonstrated.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.185-192
• /
• 2005

The aim of this paper is to analyze handling qualities of tiltrotor aircraft(TR-S4) in helicopter flight mode including hovering and forward flight. Analysis of handling qualities is composed of aircraft response to control inputs that effect on stability and controllability. In short term response analysis, bandwidth is the critical parameter for small amplitude motions since it relates to the ability of a pilot to crisply start and stop maneuver. The handling qualities of TR-S4 in helicopter mode are analyzed with a SAS and an attitude controller and are satisfied level 1 in almost criteria with simulation of TR-S4 6-DOF nonlinear model.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.438-442
• /
• 1998

The helicopter system is non-linear and complex. Futhermore, because of absence of an accurate mathematical model, it is difficult accurately to control its attitude. But we can control the non-modeled system with the uncertainty and unstructure using the fuzzy control algorithm. Therefore, we apply optimized fuzzy controllers for the control of its elevation angle and azimuth one using expert's intuitions and knowledges. The simulation and experimental results of the hellicopter simulator CE150 with MATLAB shall be introduced.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.746-749
• /
• 2002

This paper is introducing a radio control helicopter as a new platform of ground truth measurement. This helicopter is normally used for spraying an agricultural chemical. It can do pinpoint hovering and programing flight using DGPS etc., A spectrometer with dual port can measure ground surface and white reference plate at the same time. And it can also take digital images by digital camera. It is needed to collect ground reflectance information as satellite sensor footprint size for satellite data validation. Generally it is possible to get such ground reflectance by an airplane measurement. But it is high cost and not so easy to make a measurement by airplane. Developed validation system can provide such ground reflectance in low cost and easy.