• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.158-167
• /
• 1994

The design concept of varaiable structure control is useful not only to stochasic systems but also to adaptive control systems. The Dynamic equation of vertical three linkage robot was derived. And it was simplyfied according to the scheme of control strategy. And we specify the form of model. Thereafter the error dynamic equation was derived between the real state of the plant and state of the model. Some simulations were performed to control robot manipulator applying the methodology of the variable structure model following adaptive control.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.62-68
• /
• 2002

To satisfy the requirement of the one axis linear positioning system, which is following control of the desired trajectory without following error and is the high positioning accuracy, feed-forward loop having cogging force model is proposed. In the one axis linear positioning system with linear PM motor, cogging force acting as disturbance is modeled analytically. Analytic model of cogging force is verified by result measured from positioning system constructed with linear PM motor. Measured result is very similar with proposed analytic model. Cogging force model is used as feet forward loop in control scheme of linear positioning system. Cogging force feed-forward'loop is obtained from analytic model of cogging farce. Trajectory following error is reduced from 300nm to 100nm by applying the proposed cogging farce feed-forward loop. By using analytic model of cogging force, the control scheme is simplified. Also this analytic model is applicable to calculation of characteristic value of positioning system in design process.

• 융합신호처리학회논문지
• /
• 제5권2호
• /
• pp.138-142
• /
• 2004

본 논문은 모델추종 제어을 위한 PID제어기법을 제안한다. 이산시간영역에서 제어성능을 개선하기 위해 제안하였고, PID 제어계에 새로운 전치 보상기를 삽입하여 모델추종제어계가 되도록 하였다. 외란이나 부하변동에 의해서 계의 응답이 변할 때 PID 제어기의 이득을 재조정할 필요가 있다. PID 제어계에서 각 PID 이득이 제어계의 성능을 크게 좌우하게 되므로 신경망을 PID제어기에 결합하여 제어계의 성능을 향상시켰고 제안한 제어계에서 PID제어기의 이득은 역전파 알고리즘에 의해 자동적으로 조정되어지도록 하였다. 모델추종 제어계의 제어성능을 확인하기 위하여 제어대상을 직류 서보 전동기의 각 위치로 하였다. 이것을 위치 제어계에 적용하여 실험을 통해 그 성능을 증명하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.931-936
• /
• 1993

Optimal model following control scheme is to design the controller which makes the response of real system follow that of desirable model. This kind of design scheme is developed for first order system. We extends the scheme for second order system regarding the characteristics of mechanical second order system for vibration suppression of flexible structures. The model of mechanical second order system is obtained using suitable damping ratios and natural frequencies. Using this scheme, we can design the good controller which uses the characteristic of second order system. Numerical examples are presented which were used optimal model following control scheme.

• 한국조명전기설비학회지:조명전기설비
• /
• 제13권2호
• /
• pp.234-234
• /
• 1999

The aim of this paper is to suggest a design method of the optimal model following control system using genetic algorithm (GA). This control system is designed by applying GA with reference model to the optimal determination of weighting matrices Q, R that are given by LQ regulator problem. The method to do this is that all the diagonal elements of weighting matrices are optimized simultaneously by GA, in the search domain selected adequately. And we design the model following control system to boi1er-turbine equipment by the proposed method. The model following control system designed by this method has the better command tracking performance than that of the control system designed by the trial-and-error method. The effectiveness of this control system is verified by computer simulation.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.159-173
• /
• 2007

In this paper, an intelligent sliding-mode position controller (ISMC) for achieving favorable decoupling control and high precision position tracking performance of permanent-magnet synchronous motor (PMSM) servo drives is proposed. The intelligent position controller consists of a sliding-mode position controller (SMC) in the position feed-back loop in addition to an on-line trained fuzzy-neural-network model-following controller (FNNMFC) in the feedforward loop. The intelligent position controller combines the merits of the SMC with robust characteristics and the FNNMFC with on-line learning ability for periodic command tracking of a PMSM servo drive. The theoretical analyses of the sliding-mode position controller are described with a second order switching surface (PID) which is insensitive to parameter uncertainties and external load disturbances. To realize high dynamic performance in disturbance rejection and tracking characteristics, an on-line trained FNNMFC is proposed. The connective weights and membership functions of the FNNMFC are trained on-line according to the model-following error between the outputs of the reference model and the PMSM servo drive system. The FNNMFC generates an adaptive control signal which is added to the SMC output to attain robust model-following characteristics under different operating conditions regardless of parameter uncertainties and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed intelligent sliding mode position controller. The results confirm that the proposed ISMC grants robust performance and precise response to the reference model regardless of load disturbances and PMSM parameter uncertainties.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.373-376
• /
• 1986

This paper proposes a robust model following control system which realizes good properties such as asymptotic stability, disturbance rejection and model following with reduced sensitivity for plant parameter variation. This algorithm can be easily applied to the multivariable control systems and the control structure is simple. As an example the aircraft control system of a convair C-131B is designed and its characteristics are examined by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.372-375
• /
• 1996

In this paper, a designing method of model following control system for linear descriptor system with disturbances is proposed. The features of this method are:1) both the physical structure of the system and the physical system variables properties can be preserved because there is no necessary to make transformation of this system. 2) boundedness of internal states are proved by means of coprime factorization of descriptor system.

• 제어로봇시스템학회논문지
• /
• 제11권3호
• /
• pp.207-213
• /
• 2005

This paper deals with an autonomous flight guidance and control algorithm design for TR301 tilt-rotor airplane under development by Korea Aerospace Research Institute for simulation purpose. The objective of this study is to design autonomous flight algorithm in which the tilt-rotor airplane should follow the given waypoints precisely. The approach to this objective in this study is that, first of all, model-based inversion is applied to the highly nonlinear tilt-rotor dynamics, where the tilt-rotor airplane is assumed to fly at helicopter flight mode(nacelle angle=0 deg), and then the control algorithm, based on classical control, is designed to satisfy overall system stabilization and precise waypoint following performance. Especially, model uncertainties due to the tiltrotor model itself and inversion process are adaptively compensated in a simple neural network(Sigma-Phi NN) for performance robustness. The designed algorithm is evaluated in the tilt-rotor nonlinear airplane in helicopter flight mode to analyze the following performance for given waypoints. The simulation results show that the waypoint following responses for this algorithm are satisfactory, and control input responses are within control limits without saturation.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.130-140
• /
• 2000

In this paper the reference model following control(RMFC) scheme through the optimal control theory is investigated for the independent rear wheel steering(IRWS) vehicle. RMFC vehicle follows the dynamic performance of a virtual vehicle as a reference model deisgned in the controller. Linear vehicle model of two degres-of-freedom is used to derive control scheme which is applied to full vehicle for evaluating handling performances. And 4WS vehicle through RMFC is compared to the conventional 2WS vehicle and 4WS vehicle in the J-turn test. The RMFC logic is also extended to IRWS vehicle, IRWS with RMFC shows not only the excellent handling performance but salso some advantages in terms of the directional stability and responsiveness from the simulation results.