• Journal of Korea Water Resources Association
• /
• v.42 no.2
• /
• pp.105-115
• /
• 2009

The objectives of this study are to deduce a problem of existing subcatchment width equation in Storm Water Management Model(SWMM) and to analyze the suitability of a new adjusted subcatchment width equation on both ideally assumed watersheds and an actual urban watershed area. The problems of existing subcatchment equation are issued on the theoretical review of the equation and from the model application on different types of simplified assumed watershed. The adjusted equation, proposed in this study, that considers the pipe flows in addition to the surface flows on small subcatchment can improve the limitation of existing equation when applied on the assumed watersheds. Also, Gunja watershed with 96.3 ha is selected and collected rainfall-runoff events for the feasibility study of the proposed equation on actual urban watershed area. The results represent that the simulated flows from adjusted equation rather than the simulated flows from existing equation are well agreed with observed ones.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.203-221
• /
• 2011

The purpose of this study is to investigate the applications of Structural Equation Modeling(SEM) into MIS area in recent years. Two methodologies, Lisrel and PLS, are adopted for the method comparison. A research model, based upon TAM(Technology Acceptance Model) is used for the analysis of the data set of a previous study. The research model includes six research variables that are composed of twenty-eight question items. 272 data are used for data analyses through Lisrel v.8.72 and Visual PLS v.1.04. This study shows the statistical results of Lisrel are the same to those of PLS. The contribution of this study can be suggested as the followings; (1) A theoretical comparison of two methodologies is shown, (2) A statistical analysis is done at a real-situated data set, and (3) Several implications are suggested.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.619-628
• /
• 2001

A viscoelastic constitutive equation of rubber is proposed under small oscillatory load superimposed on large static deformation. The proposed model is derived through linearization of Simos nonlinear viscoelastic constitutive model and reference configuration transformation. Statically pre-deformed state is used as reference configuration. The model is extended to a generalized viscoelastic constitutive equation including widely-used Mormans model. Static deformation correction factor is introduced to consider the influence of pre-strain on the relaxation function. The model is tested for dynamic behavior of rubbers with different carbon black fractions. It is shown that the constitutive equation with static deformation correction factor agrees well with test results.

• Journal of Korean Society for Quality Management
• /
• v.39 no.1
• /
• pp.90-97
• /
• 2011

The purpose of this study is to analyze various factors comprising a job satisfaction; determine possible factors that affects job satisfaction. Job satisfaction model is designed to evaluate major factors, such as job stress and strength, and to assess relationship between these factors. Partial least squares algorithm is used to develop a job satisfaction measurement model. To evaluate validity of developed model, survey data of health insurance review and assessment service is to applied.

• Korean Journal of Agricultural Science
• /
• v.49 no.1
• /
• pp.61-75
• /
• 2022

The first purpose of this study is to evaluate the usefulness of pork traceability data, which is monthly time-series data, and to draw implications with regard to its usefulness. The second purpose is to construct a dynamic ecological equation model (DEEM) that reflects the biological characteristics at each growth stage, such as pregnancy, birth and growth, and the slaughter of pigs, using traceability data. With the monthly pig model devised in this study, it is expected that the number of slaughtered animals (supply) that can be shipped in the future is predictable and that policy simulations are possible. However, this study was limited to traceability data and focused only on building a supply-side model. As a result of verifying the traceability data, it was found that approximately 6% of farms produce by mixing great grand parent (GGP), grand parent (GP), parent stock (PS), and artificial insemination (AI), meaning that it is necessary to separate them by business type. However, the analysis also showed that the coefficient values estimated by constructing an equation for each growth stage were consistent with the pig growth outcomes. Also, the model predictive power test was excellent. For this reason, it is judged that the model design and traceability data constructed with the cohort and the dynamic ecological equation model system considering biological growth and shipment times are excellent. Finally, the model constructed in this study is expected to be used as basic data to inform producers in their decision-making activities and to help with governmental policy directions with regard to supply and demand. Research on the demand side is left for future researchers.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.13-26
• /
• 1995

In this paper three turbulence models including two-equation model by Blumberg and Mellor (1987), one-equation model with mixing length formula of Blackadar's (1962), and zero-equation model of Prandtl's (1925) were compared in homogeneous, unstratified channel flows. Steady flows which a steep-sided trapezoidal trench with uniform discharge, tidal flow and steady wind-driven flow in finite channels are considered in detail. Steady flows in a trench and tidal flows in a finite channel were reproduced fairly accurately and there was virtually no difference among results of three turbulence models. However, In case of steady wind-driven flow only two-equation model reproduced the important features of experimental data. the other two models underestimated the surface velocity. In tidal and wind-driven flows with negligibly small adjective and diffusive effects, the two-equation model gives rise to parabolic profile of eddy viscosity with maximum at the mid0depth, and the one and zero equation model based on Blackadar formula linear profile with maximum at the surface.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.76-82
• /
• 2009

The NIOSH lifting equation has been used as a dominant tool in evaluating the hazard levels of lifting tasks. Although it provides two different ways for each simple and complex lifting task, the NIOSH simple lifting equation is almost used for not only simple tasks but also complex tasks. However, most of lifting tasks in industries are in the form of complex lifting. Therefore some errors occur inevitably in the evaluation of complex lifting tasks. Among complex lifting tasks, a multi-stacking task is the most popular in lifting tasks. To compensate the error in the evaluation of multi-stacking tasks by using the NIOSH simple lifting equation, a set of calculations for finding LIs(Lifting Indices) was performed for the systematically varying multi-stacking tasks. Then a regression model which finds the equivalent height in simple lifting task for multi-stacking task was established. By using this model, multi-stacking tasks can be evaluated with less error. To validate this model, some real multi-stacking tasks were evaluated as examples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1270-1275
• /
• 2005

Rolling process to fabricate a strip with even thickness is significant to enhance the quality of the strip. The thickness of a strip can be effectively controlled by pair-cross mills. However, pair-cross mill generates thrust in the axial direction of roller and causes skewness, deflection, twist and even accidental roll chock failure. Therefore, accurate estimation of the thrust of the pair-cross mill during rolling process is necessary to monitor the failure of roll and the quality of products. An empirical equation given by Mitsubishi Heavy Industry (MHI) is hitherto employed, where the thrust is expressed in terms of rolling force, reduction ratio and crossed angle. However it turns out that the MHI empirical equation provides somehow inaccurate and unsuitable thrust in practical rolling processes. Moreover, we learn that three parameters involved in MHI equation are coupled each other. In this paper, axiomatic design principle is employed to select appropriate parameters involved in approximate equation in order to make parameters uncoupled. A quadratic equation using response surface method with new parameters is suggested. The accuracy of the approximate model is examined by comparing with real experimental data.

• Journal of Families and Better Life
• /
• v.24 no.1 s.79
• /
• pp.11-30
• /
• 2006

The purpose of this study was to verify a Structural Equation Model that constructed the causations among the leisure constraints, leisure. motivation, and leisure participation. This model posits that constraints determine motivation to participation. Concretely, structural and interpersonal leisure constraints(contextual factors) will affect interpersonal leisure constraints in the light of ecological perspective. Also, leisure constraints will affect leisure motivation based on self-determination theory that may influence leisure participation indirectly. A survey questionnaire was administered to 301 elderly in an institution for the elderly. A measurement model and a structural equation model estimates by Maximum Likelihood method(ML method) utilizing LISREL 8.0 ver. The analysis showed that a goodness of fit is good of structural equation model presented in the study. And, all hypothesis adopted about causations among the leisure constraints, leisure motivation, leisure participation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.97-103
• /
• 1997

DO concentration in the aquatic system is important for the water quality management perspective. Water quality model uses available reaeration coefficient (K2) estimation equations in calculating DO, however, they might include inevitable uncertainty that the model output can be less reliable. In this study, the calibrated QUAL2E model for the Passaic River in New Jersey, U.S., was used to examine the effect of K2 estimation equation on the output DO concentration of the river. The model was run with six commonly used equations separately with all the other conditions remained same. The result showed that the output DO concentration profiles varied widely with different equations, and maximum difference was 4.96 mg/L for the same location which is unacceptably large. It implies that the development of reliable equation is required for proper water quality management. The unreliable model output can lead to a wrong decision in water quality management such as unnecessarily high or too low treatment of wastewater, which will cause serious effect on the community economically and socially in either case. Generating more reliable model output with slight investment to develop a site specific K$_2$ equation can improve the decision making process significantly and is highly recommended.