• Journal of Ginseng Research
• /
• 제17권3호
• /
• pp.219-223
• /
• 1993

Assessment of root weight grade system for the numeral definition in Korea ginseng was tried by investigation of 13 boxes of the 15-root-grade of 4-year-old white ginseng as a model. In this case satisfaction to theoretical value was 58% in root weight and 50% in root number. The coefficient of variation (CV) was high (35%) for individual root weight in package. The CV of tap root weight 1 among package is low (7.1%) even though there was no significant correlation between tap root weight : and lateral root weight among roots. The mean percentage of tap root to root weight in each package ranged 61 to 74% with CV range of 16.5 to 33.2%. The CV was not much different between 1st and 2nd lateral root weight and the means was above 60%. Strict practice of numeral definition of root weight grade system will be prerequisite for chemical standardization of Korea ginseng.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.635-641
• /
• 2007

The construction starts its business by receiving the order from client and owner. The client presents requirements and related information so that the desired result can come out while the designer and the builder express and implement the building according to set objectives and goals of project based on information on project environment and presented requirements. Because the construction project makes decisions on such objectives at its early stage and previous stage becomes the situation for decision making of next stage as the computation to implement decisions get performed. Accordingly, this study has mentioned necessity of requirement analysis and systematization of construction project, analyzed the work of construction's early stage and resented a plan for objective of construction project requirement definition model in which requirements engineering has been applied and using it while making decisions on designing.

• 한국측량학회지
• /
• 제39권6호
• /
• pp.363-369
• /
• 2021

정밀도로지도는 자율주행차의 기본 인프라로 활용되어 최신 도로정보가 신속하게 반영되어야 한다. 하지만 현재 정밀도로지도 공정 중 객체 도화 및 구조화 편집과정이 수작업으로 이루어지며 주요 구축 대상인 도로 노면선 표시의 레이어를 생성하는데 가장 오랜 시간이 소요된다. 이에 본 연구에서는 선행 연구에서 기학습된 포인트넷(PointNet) 모델을 통해 색상 유형(백색, 청색, 황색)이 예측된 도로 노면선 표시의 포인트 클라우드를 입력 데이터로 활용하였고, 이를 기반으로 본 연구에서는 도로 노면선 표시 레이어의 도화 및 구조화 편집을 자동화하는 방법론을 제안하였다. 제안한 방법론을 통해 구축한 3차원 벡터 데이터의 활용성을 검증하기 위해 정밀도로지도 품질검사 기준에 따라 정확도를 분석하였다. 벡터 데이터의 위치정확도 검사에서 수평 오차와 수직 오차에 대한 평균제곱근오차(RMSE: Root Mean Square Error)는 0.1m 이내로 나타나 적합성을 검증하였으며, 구조화 편집 정확도 검사에서 선표시 유형과 선규제 유형의 구조화 정확도가 모두 88.235%로 나타나 활용성을 검증하였다. 따라서, 본 연구에서 제안한 방법론으로 정밀도로지도를 위한 도로 노면선 표시의 벡터 데이터를 효율적으로 구축할 수 있는 것을 알 수 있었다.

• 시스템엔지니어링학술지
• /
• 제11권2호
• /
• pp.75-83
• /
• 2015

This paper describes modeling & simulation(M&S) model for dynamic analysis of helicopter rotor blades. Simulation model is developed using Dymola tool which implements the open source language - Modelica. Modelica is appropriate for developing multibody dynamic analysis model. To develop an M&S model efficiently, model based systems engineering(MBSE) is applied. Some diagrams such as requirement diagram, block definition diagram and sequence diagram etc. are drawn to capture the concept of M&S model. This activity is done utilizing the open source tool - Papyrus.

• 로봇학회논문지
• /
• 제17권4호
• /
• pp.425-430
• /
• 2022

As robots are considered one of the mainstream digital transformations, robots with machine vision becomes a main area of study providing the ability to check what robots watch and make decisions based on it. However, it is difficult to find a small object in the image mainly due to the flaw of the most of visual recognition networks. Because visual recognition networks are mostly convolution neural network which usually consider local features. So, we make a model considering not only local feature, but also global feature. In this paper, we propose a detection method of a small marker on the object using deep learning and an algorithm that considers global features by combining Transformer's self-attention technique with a convolutional neural network. We suggest a self-attention model with new definition of Query, Key and Value for model to learn global feature and simplified equation by getting rid of position vector and classification token which cause the model to be heavy and slow. Finally, we show that our model achieves higher mAP than state of the art model YOLOr.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1105-1108
• /
• 2005

Media service model is divided into 3 models that are Client Pull, Server Push, and IPP(Interleaving Pull & Push) model. In most single VOD(Video On Demand) environment, Client Pull model was sufficient to play the movie Because most media contents has a low bitrate and resolution. But according to an increment of the demand of the high definition media, Client Pull model is not sufficient. Parallel VOD environment is made of several of VOD servers and provides the parallel media stream simultaneously for one client. We compared and analyzed the performance of service models with respect to network delay and data size in buffer in the single and parallel VOD environment and we found that IPP service model keeps the least network delay and stable client buffer state in the parallel VOD environment.

• 대한수학회지
• /
• 제43권4호
• /
• pp.885-897
• /
• 2006

A new mathematical model of pumping heart coupled to lumped compartments of blood circulation is presented. This lumped pulsatile cardiovascular model consists of eight compartments of the body that include pumping heart, the systemic circulation, and the pulmonary circulation. The governing equations for the pressure and volume in each vascular compartment are derived from the following equations: Ohm's law, conservation of volume, and the definition of compliances. The pumping heart is modeled by the time-dependent linear curves of compliances in the heart. We show that the numerical results in normal case are in agreement with corresponding data found in the literature. We extend the developed lumped model of circulation in normal case into a specific model for arrhythmia. These models provide valuable tools in examining and understanding cardiovascular diseases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.37-38
• /
• 2018

BIM(Building Information Modeling) in the architecture, VDC(Virtual Design and Construction) defined CIFE(Center for Integrated Facility Engineering) of Stanford university in USA, and Data-driven design definition issued by TECDOC-1284 of IAEA are doing data-level design generated by 3D CAD technology, integrating and managing related information based on the 3D model, and Using 3D models effectively during nuclear power plant life cycle. 3D model of domestic nuclear power industry is using interference review between design fields, 4D system linked 3D construction model and schedule activity, but the 3D model generated in the design phase is effectively not utilized during the construction, operation, decommissioning. therefore, This study is aimed to suggest 3D model LOD(Level of Detail) advancement method through the analysis of existing literature, 2D drawings, and 3D models throughout nuclear power plant lifecycle.

• 한국전자거래학회지
• /
• 제2권2호
• /
• pp.55-74
• /
• 1997

In this paper, the concept of coordination under the setting of cooperative multiagent systems is examined. Based on the concept, a computational model in which the key constructs of coordination can be precisely defined is developed. This model can serve as a basis for developing software systems designed to support coordination in Eletronic Commerce. Coordination is viewed as management of conflicting demands on finite resources by actors or acitivities. The model views coordination as a cycle of four phases: the definition phase, the conflict resolution phase, the action phase, and the adaptation phase. Then, a formal model of coordination, both as a phenomenon and as a process is devloped. Within the context of this model, important concepts such as decomposability, informational privacy, informational decentralization, and informational efficiency are examined.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.277-285
• /
• 1997

In this paper, the definition to flexibility is examined through the literature and re-classified to set up an evaluation model. Flexibility is classified into three categories to find the flexibility types for evaluation. The flexibility type called as manufacturing flexibility is defined and a model is developed to make the performance evaluation possible, The manufacturing flexibility has a heavy relationship to the machine flexibility; and 5 flexibility types out of 8 have relationship to the machine flexibility. This indicates that it is possible to have a pretty good evaluation measure if the machine flexibility related types could be evaluated using a model. There are four different inter-arrival times in the model. A big time saving is observed if the processing time is set equal to 72 second. This indicates that a flexibility affects the system a lot if the inter-arrival time is close to the processing time. The model used in this paper includes multi-processes in a production line with machine failure. However, development of realistic models with buffer between processes and some of the flexibility types not included in this model are remained for further research.