• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.291-298
• /
• 2003

Interfacial crack problems between fiber and matrix in composite materials are discussed. A series of interfacial crack initiation and propagation experiments are conducted using the biaxial loading device for various mode-mixes. Normal crack opening displacement (NCOD) is measured near crack front by a crack opening interferometry and used for extracting fracture parameters. From mixed mode interfacial crack initiation experiments, large increase in toughness with shear components is observed. Initial velocity of crack propagation is very dependent upon the mode-mixes. It increased with positive mode-mix due to the increase of stress singularities ahead of crack front and decreased with negative mode-mix resulting from the increase of the degree of compressive stress behind the crack front. Crack propagation was less accelerated with positive mode-mix than the negative mode-mix.

• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.174-185
• /
• 2012

The purpose of this study is to suggest planning strategy of tenant mix for UEC based on the final result of tenant mix analysis of five different research cases. The following is the comprehensive explanation about the result of tenant mix planning strategy for UEC currently in operation and when planning a new facility. First, overall research cases in this study show the tendency of following an old tradition, which stresses direct sales focusing on retail and dining adaptation. In order to compensate the defect, it is suggested to adopt new type of tenants with the functional mix of retail and dining with entertainment rather than decreasing the proportion of retail and dining tenant and increasing it of entertainment tenant. Second, the floorplan of UEC should adopt racetrack or circuit form that can stimulate shoppers' circular movement so to expose them to as much tenants as possible. Service consumption mode related tenants are required to place on the side or the edge of UEC, while retail consumption mode related tenants should be planned in the center. Among dining consumption mode related tenants, impulse dining tenants like a coffee shop should be placed at the turning point or at the end of the pathway, destination tenants like a restaurant and a food court, on the other hand, is needed to be placed in the center of the space. In case of Entertainment related tenants, destination tenants like bookstore or multiplex should also be placed at the end of the pathway, and on the way to those tenants, it is required to place general tenants that can share target customers with them. On the contrary, game center or record shop like tenants that can stimulate impulse sales should be placed on the visitor's main move or near the other destination tenants. Third, anchor tenants play an important role in gathering people to the UEC, and then induce them to visit the other tenants that are located near the anchors. Thus it is suggested to plan to place general tenants on the same floor as anchor tenants are placed so they can share the characteristics of target customers which create synergy effect.

• Journal of Mechanical Science and Technology
• /
• v.16 no.1
• /
• pp.39-45
• /
• 2002

Initiation and propagation of interfacial crack along bimaterial interface are considered in this study. A biaxial loading device for a single specimen is used for obtaining a wide range of mode-mixities. The specimen is an edge-cracked bimaterial strip of glass and epoxy; the biaxial loading device, being capable of controlling displacements in two perpendicular directions, is developed. A series of interfacial crack initiation and Propagation experiments are conducted using the biaxial loading device for various mixed modes. Normal crack opening displacement (NCOD) is measured near crack front by a crack opening interferometry and used for extracting fracture parameters. From mixed mode interfacial crack initiation experiments, large increase in toughness with shear components is observed. The behavior of interfacial crack propagation analyzed as a function of mode-mix shows that initial crack propagation is delayed with increase of mode-mixity, and its velocity is increased with positive mode-mixity but decreased with negative case. However, it is found that crack propagation is less accelerated with positive mode-mixity than the negative mode-mixity, which may be caused by contact and/or effects of friction between far field and near-tip Held along the interfacial crack.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.48-54
• /
• 2000

This paper describes the effect of molding pressure, specimen geometries for Mixed Mode I/II interlaminar fracture toughness of carbon fiber reinforced plastic composites by using asymmetrical double cantilever beam(ADCB) specimen. The value of $G_{I/IIC}$ as a function of various molding pressure is almost same at 307, 431, 585 kPa. However it shows the highest value under 307 kPa molding pressure. The effect of $G_{I/IIC}$ due to the change of initial crack length of ADCB specimen was almost negligible in this study. It turns out that the condition for mix mode quasi-static crack growth in ADCB specimen is the ratio of the crack length to that of the specimen, i.e., ${\alpha}/L<0.4$.

• Journal of East Asia Management
• /
• v.4 no.2
• /
• pp.39-62
• /
• 2023

Online and offline mixed teaching mode has become an important way to promote the connotative development of higher education. Under the background that offline teaching has become mature, in order to further promote the development of online education, and promote the implementation of the mixed teaching mode, to mix and to provide basis for the construction of the mixed teaching mode, this study takes the online learning effect as the evaluation basis, adopts the online questionnaire survey to conduct statistical analysis of the online learning behavior of 2213 college students, and discusses the differentiation phenomenon of online learning groups from the micro, meso and macro perspectives. It is found that there are significant differences in the online learning effect of college students in terms of the type of learning platform, whether the school implements the online offline mixed teaching mode, education background, grade (bachelor's degree), and region. Colleges and universities should strengthen the promotion of online and offline mixed teaching mode; The online learning platform should improve the platform function and strengthen the functional differentiation design of learning resources for students. Education departments pay attention to the learning effect of online learners in different regions, and bridge the gap in regional education.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.737-744
• /
• 2017

Geopolymer Concrete is typically proportioned with activator solution leading to moderately high material cost. Such cost can be enduring in high value added applications especially when cost savings can be recognized in terms of reduction in size of the members. Proper material selection and mix proportioning can diminish the material cost. In the present investigation, a total of 27 mixes were arrived considering the mix parameters as liquid-binder ratio, slag content and sodium hydroxide concentration to study the mechanical properties of geopolymer concrete (GPC) mixes such as compressive strength, split tensile strength and flexural strength. The derived statistical Response Surface Methodology is beleaguered to develop cost effective GPC mixes. The estimated responses are not likely to contrast in linear mode with selected variables; a plan was selected to enable the model of any response in a quadratic manner. The results reveals that a fair correlation between the experimental and the predicted strengths.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.325-331
• /
• 1994

Organic extracts of diesel- exhaust particulates were analyzed for mutagenicity using Ames Salmonella typhimurium assay system. An experimental diesel microbus used was drived on the chassis dynamometer according to CVS-75 mode. The samples were taken from the mixed gases in a dilution tunnel. With a high-volume air sampler equipped with double filter holders, particulate matters were collected on a teflon-coated glass fiber filter placed behind a activated carbon filter. After ultrasonic extraction with benzene- ethanol and evaporation to dryness, the residue was dissolved in dimethylsulfoxide. Each sample was tested toward 2 strains, TA100 and TA98 by the pre-incubation method in the absence and presence of S-9mix. Average concentration of diesel- exhaust particulates was about 116.6mg/m$^3$, and 44.1~62.2 ％ to the total weight of particulates, consisted of organic matters. The mutagenicities of diesel- exhaust particulate organic matters were 4,512 and 2,205 revertants/m$^3$ toward TA100 without and with S-9mix, respectively. Those toward TA98 were 13,367 and 3,715 revertants/m$^3$, respectively.

• Journal of the Korean Society of Costume
• /
• v.51 no.5
• /
• pp.17-28
• /
• 2001

The purposes of this study were to arrange and analyze the Oriental Mode in 20th century fashion and to clarify that Oriental dress and its ornaments appearing as the main subject of Occident fashion gradually The results were as follows : First, Oriental Mode in 1900-1950s was prescribed as the 'Orientalism' to be expressed Occidental imperialistic viewpoint. Therefore, the Orient was used as the simple recording mark of the imperialism product or commercial motive and it was reflected in fashion. Second, it was explained in 1960-1970s as the 'Folklore Orientalism' that focus was moved into the folklore costume of Orient. Third, in 1980s, 'Ethnic' was conspicuous that reflected the traditional costume in the area of non-christianity. Especially, it was the decade that the Middle East attracted attention. Fourth, Oriental Mode in 1990s appeared as the 'Fusion' that Oriental and Occidental elements were mixed and compromised on equal terms. Fifth, it was expressed as a word 'Zen' that had natural fiber, moderate color and silhouette to be most basic and concise about human body at the end of 1990s. This study could confirm that the center of fashion was being converted into the Orient gradually. This may be understood as the pluralistic culture phenomenon. Namely, eclectic principle to recognize mutual style and individualistic nature and to utilize and mix was made, and this brought the conversion into Oriental sense of value.

• IE interfaces
• /
• v.14 no.1
• /
• pp.30-38
• /
• 2001

Logistics network management has become one of the most important sources of competitive advantage regarding logistics cost and customer service in numerous business segments. Logistics network simulation is a powerful analysis method for designing and planning the logistics network optimally in an integrated way. This paper introduces a logistics network simulator, LONSIM, developed by author. LONSIM deploys a mix of simulation and optimization functions to model and analysis logistics network issues such as facility location, inventory policy, manufacturing policy, transportation mode, warehouse assignment, supplier assignment, order processing priority rule, and vehicle routes. LONSIM is built with AweSim 2.1 and Visual Basic 6.0, and executed in windows environment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.599-606
• /
• 1999

Water extracts of persimmon leaf tea(PLTE), green tea(GTE) and oolong tea(OTE), at the con centration used for human consumption, were examined for inhibitory effects on the mutagenicity of major classes of dietary and environmental mutagens including indirect acting mutagens, B[ ]P (benzo[ ]pyrene), IQ(2 amino 3 methylimidazo[4,5 f]quinoline), 2 AA(2 aminoanthracene) in the presence of S9 mix and direct acting mutagen, 4 NQO(4 nitroquinoline 1 oxide) without S9 mix, using the modified Ames Salmonella/microsome assay. PLTE, GTE and OTE showed very potent and concentration dependent antimutagenic effects against indirect acting mutagens B[ ]P and IQ. At the maximum concentration(16,200 g/plate) of each tea extract, number of colonies decreased in a dose dependent manner up to 82~100%. Similar inhibition of PLTE, GTE and OTE were seen at higher concentration in the mutagenicity of the 2 AA following an initial increase in the activity at lower concentration. However, the mutagenicity of the direct acting mutagen 4 NQO were not suppressed at lower concentration of the three tea extracts, and higher concentration of the tea extracts enhanced mutagenic activity of the mutagen. There were no differences in the mode of antimutagenesis between PLTE, GTE, and OTE, in both Salmonella typhimurium TA98 and TA100 strains against the same mutagen. In conclusion, the water extracts of persimmon leaf tea, green tea and oolong tea possess marked antimutagenic potential against a variety of important dietary and environmental indirect acting mutagens, but the activity was not observed against the direct acting mutagens. These results suggest that the mode of inhibitory action may not have resulted from direct interaction between tea extracts and the mutagens, but rather from indirect metabolic inactivation of mutagens by tea extracts.