• 한국광학회지
• /
• 제15권1호
• /
• pp.22-27
• /
• 2004

본 논문에서는 광도파로와 광섬유사이에서 광손실을 줄이기 위한 모드 크기 변환기를 설계하였다. 설계된 모드 크기 변환기는 주기적으로 분리된 테이퍼 광도파로로 구성된 모드 크기 변환기이며, 공정상의 적용이 용이한 수평 테이퍼 구조를 선택하였다. 높이와 폭이 3$\mu\textrm{m}$${\times}$3$\mu\textrm{m}$이며 1.5%실리카 광도파로의 경우 파장이 1550nm 파장에서 최적의 모드 크기 변환기 설계 파라미터는 테이퍼 영역의 길이가 500$\mu\textrm{m}$이고, 분리된 광도파로의 길이는 5$\mu\textrm{m}$이며, 주기의 Duty-Cycle은 0.95, 광도파로와 광섬유의 접속면에서의 폭은 1.3$\mu\textrm{m}$이였다. 이 때 결합손실은 0.33㏈/point로 광섬유와 광도파로를 직접 연결할 때 보다 1.27 ㏈/point가 감소하였다.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.80-82
• /
• 1998

A new fiber coupling scheme using thermally over-expanded core(TOEC) fiber was proposed and demonstrated. In the coupling experiment between 1.3${\mu}{\textrm}{m}$ FP-LD and the proposed TOEC fiber with a tapered hemispherical microlens. superior performances such as a long working distance, a high coupling efficiency, and large misalignment tolerances were verified experimentally.

• 한국광학회지
• /
• 제18권4호
• /
• pp.280-285
• /
• 2007

다중모드 광섬유 테이퍼(taper)를 이용하여 레이저와 광섬유 혹은 두 개의 서로 다른 광섬유 사이의 효과적인 광결합을 위한 모드 크기 변환기를 제안하고 구현하였다. 이 소자의 입력 단은 다중 모드 구조이고 출력단은 단일 모드 구조이다. 소자의 구조 및 광원과 소자사이의 결합 조건이 결합 효율에 미치는 영향을 이론적으로 분석하였다. 이론적 결과는 제안된 소자가 가우시안 빔을 단일모드 광섬유로 거의 손실 없이 결합할 수 있는 것을 보였다. 제안된 소자를 두 개의 마이크로 토치가 부착된 장비를 이용해 제작하였다. 실험 결과 제작된 다중모드광섬유 테이퍼를 통해 $50\;{\mu}m$ 빔 크기를 가지는 가우시안 빔을 단일모드 광섬유로 효과적으로 결합할 수 있는 것을 보였다. 소자의 삽입 손실은 1.3 dB였다.

• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.28-35
• /
• 2006

Substructure coupling or component mode synthesis may be employed in the solution of dynamic problems for large, flexible structures. The model is partitioned into several subdomains, and a generalized Craig-Bampton representation is derived. In this paper the mode sets (normal modes, constraint modes) is employed for model reduction. A generalized model reduction procedure is described. Vaious reduction methods that use constraint modes is described in detail. As examples, a flexible structure and a 10 DOF damped system are analyzed. Comparison with a conventional reduction method based on a complete model is made via eigenpair and dynamic responses.

• 천문학회보
• /
• 제41권2호
• /
• pp.35.3-36
• /
• 2016

Density and velocity perturbations in scales most relevant for the first galaxy formation are strongly affected by large-scale density perturbations, velocity-divergence perturbations and the baryon-cold dark matter (CDM) streaming velocities. Even at redshifts as high as z~200, this mode-mode coupling imprints a significant impact on the small-scale perturbations, at the wavenumber k >${\sim}100Mpc^{-1}$, as was calculated in our recent work. This implies that cosmological initial conditions based on the usual linear theory is no longer valid in these scales. We present a new cosmological initial condition generator, BCCOMICS, which generates initial conditions for the cold dark matter (CDM) and baryons in scales most relevant for the first galaxy formation. BCCOMICS is based on the linear perturbation theory including the mode-mode coupling terms, and generates cosmological initial conditions for the SPH-basded code GADGET and the AMR-based code ENZO. We also present our preliminary result on the cosmic variance of the first galaxy formation, studied by using BCCOMICS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.367-370
• /
• 2004

This paper present a new disk-type piezoelectric transformer. The input side of the transformer has a crescent-shaped electrode and the output side has a focused poling direction. The piezoelectric transformers operated in each transformer's resonance vibration mode. The electrodes and poling directions on commercially available piezoelectric ceramic disks were designed so that the planar or shear mode coupling factor $(k_p,\;k_{15})$ becomes effective rather than the transverse meed coupling factor $(k_{31})$. A single layer prototype transformer, 26[m] in diameter and 2.0[mm] thickness, was fabricated, such as step-up ratio, power transformation efficiency and temperature were measured.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.114-118
• /
• 2013

In this study, coupled mode piezoelectric devices for AE sensor application with excellent displacement and piezoelectric characteristics were simulated using ATILA FEM program, and then fabricated. Displacements and electromechanical coupling factors of the piezoelectric devices were investigated. The simulation results showed that excellent displacement and electromechanical coupling factor were obtained when the ratio of diameter/thickness was 1.0. The piezoelectric device of ${\Phi}/T$= 1.0 exhibited the optimum values of fr= 406 kHz, displacement= $6.11{\times}10^{-8}[m]$, $k_{eff}$= 0.648. The results show that the coupled vibration mode piezoelectric device is a promising candidate for the application of AE sensor piezoelectric device.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.562-568
• /
• 2013

This paper presents a design of a wireless power transfer system based on magnetic resonant coupling technology with in-band wireless communication. To increase the transmission distance and compensate for the change in the effective capacitance due to the varying distance, the proposed system used a loop antenna with a selectable capacitor array. Because the increased transmission distance enables multiple charging, we added a communication protocol operated at the same frequency band to manage a network and control power circuits. In order to achieve the efficient bandwidth in both power transfer mode and communication mode, the S-parameters of the loop antennas are adjusted by switching a series resistor. Our test results showed that the loop antenna achieved a high Q factor in power transfer mode and enough passband in communication mode.

• 대한전자공학회논문지SD
• /
• 제44권4호
• /
• pp.18-23
• /
• 2007

본 논문에서는 서로 반대방향으로 진행하는 코어모드와 클래딩모드사이에서 모드결합이 일어나는 경사진 선형처프된 광섬유격자쌍을 이용한 새로운 투과형 분산보상기을 제안하였다. 제안된 투과형 분산보상기에서 모드결합이 최대로 일어나기 위한 위상정합조건과 최적의 경사각을 제시하였으며, 시뮬레이션을 통해서 제안된 투과형 분산보상기의 분산기울기와 분산보상 가능한 대역폭은 각각 3,068ps/nm와 0.45nm이고, 투과형 분산보상기로 동작함을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.234-235
• /
• 2005

This paper present a new disk-type piezoelectric transformer. The input side of the transformer has a crescent-shaped electrode and the output side has a focused poling direction. The piezoelectric transformers operated in each transformer's resonance vibration mode. The electrodes and poling directions on commercially available piezoelectric ceramic disks were designed so that the planar or shear mode coupling factor ($k_p,\;k_{15}$) becomes effective rather than the transverse mode coupling factor ($k_{31}$).