• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.658-665
• /
• 2014

The neural stimulators have been employed to the visual prostheses system based on the functional electrical stimulation (FES). Due to the size limitation of the implantable device, the smaller area of the unit current driver pixel is highly desired for higher resolution current stimulation system. This paper presents a 16-channel compact current-mode neural stimulator IC with digital to analog converter (DAC) sharing scheme for artificial retinal prostheses. The individual pixel circuits in the stimulator IC share a single 6 bit DAC using the sample-and-hold scheme. The DAC sharing scheme enables the simultaneous stimulation on multiple active pixels with a single DAC while maintaining small size and low power. The layout size of the stimulator circuit with the DAC sharing scheme is reduced to be 51.98 %, compared to the conventional scheme. The stimulator IC is designed using standard $0.18{\mu}m$ 1P6M process. The chip size except the I/O cells is $437{\mu}m{\times}501{\mu}m$.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.5
• /
• pp.545-565
• /
• 2018

A numerical code is developed based on potential flow theory to investigate nonlinear sloshing in rectangular Liquefied Natural Gas (LNG) tanks under forced excitation. Using this code, internal free-surface elevation and sloshing loads on liquid tanks can be obtained both in time domain and frequency domain. In the mathematical model, acceleration potential is solved in the calculation of pressure on tanks and the artificial damping model is adopted to account for energy dissipation during sloshing. The Boundary Element Method (BEM) is used to solve boundary value problems of both velocity potential and acceleration potential. Numerical calculation results are compared with published results to determine the efficiency and accuracy of the numerical code. Sloshing properties in partially filled rectangular and membrane tank under translational and rotational excitations are investigated. It is found that sloshing under horizontal and rotational excitations share similar properties. The first resonant mode and excitation frequency are the dominant response frequencies. Resonant sloshing will be excited when vertical excitation lies in the instability region. For liquid tank under rotational excitation, sloshing responses including amplitude and phase are sensitive to the location of the center of rotation. Moreover, experimental tests were conducted to analyze viscous effects on sloshing and to validate the feasibility of artificial damping models. The results show that the artificial damping model with modifying wall boundary conditions has better applicability in simulating sloshing under different fill levels and excitations.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.5
• /
• pp.286-299
• /
• 2006

Due to the continuing technical progress in the capabilities of modeling, simulation, and sensor devices, huge volume data with very high resolution are common. In scientific visualization, various interactive real-time techniques on high performance parallel computers to effectively render such large scale volume data sets have been proposed. In this paper, we present a mobile volume visualization system that consists of mobile clients, gateways, and parallel rendering servers. The mobile clients allow to explore the regions of interests adaptively in higher resolution level as well as specify rendering / viewing parameters interactively which are sent to parallel rendering server. The gateways play a role in managing requests / responses between mobile clients and parallel rendering servers for stable services. The parallel rendering servers visualize the specified sub-volume with rendering contexts from clients and then transfer the high quality final images back. This proposed system lets multi-users with PDA simultaneously share commonly interesting parts of huge volume, rendering contexts, and final images through CSCW(Computer Supported Cooperative Work) mode.

• Health Policy and Management
• /
• v.16 no.2
• /
• pp.117-134
• /
• 2006

Korean health care system introduced the reform for separation between prescribing and dispensing of drugs (SPD reform) in the latter part of the year 2000. The objective of this paper is to look at what change this reform has brought about in the financial situation of Korean public health insurance scheme, particularly in terms of insurance benefit outlay. Since the inception of the reform is a development of more than five years ago, its impact on the finance situation would now start to become apparent. Hypothesis is set in this study for each of three components of drug reimbursement in health insurance, i.e. average price level, composition of drugs and their overall volume. In terms of the classification of health care services by mode of production, the impact of the SPD reform is confined mainly to the last two among three drug reimbursement fields including inpatient department, out-patient department and pharmacy. Pure impact of the SPD reform was estimated to be more or less than 1.7 trillion won, 13.1% of the total outlay of the Nation Health Insurance in 2001, and more than 2.0 trillion won, 14.9% of the total outlay of the Nation Health Insurance in 2003. Both dispensing fees for the pharmacists, which had been newly introduced on occasion of the SPD reform, and larger share of expensive drugs in the medicines prescribed by doctors were confirmed to be main drivers of the augmentation of drug reimbursement.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.221-235
• /
• 2002

Many people are getting more and more interested in the value of information sharing in a supply chain in proportion to the development of information technology in these days. In spite of much interest in the value of shared information, the related studies concluded that the effect of only sharing information strategy between upper and lower level is not large However, many related companies want to link each channel members in the supply chain with on-line to expect to reduce the cost by means of information sharing. This study wants to evaluate the alternative strategy to reduce more related costs than only sharing information strategy. This paper analyzed that how much the total supply chain cost is to change in the case of a transfer of decision rights from the lower (retailers) to the upper level (depot, vendor) in a supply chain. The decision rights mean the rights of being able to decide when to order, how much to order, where to order, and what mode to transport or distribute, etc. in a supply chain. By the experimental simulation study to the simple case, the strategy to share only information took the low effect of 1～2%, but the strategy to transfer the decision lights from the lower to the upper member had larger effect of about 5%. However. for the strategies to work well, it needs to cooperate closely among each supply chain members, and the fruits from the transfer of decision rights in a supply chain are allocated to each chain members reasonably Therefore, there needs to study in the future not only the exact transfer effect of decision rights, but the reasonable allocation method of the fruits among the chain members.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.1
• /
• pp.69-76
• /
• 2010

While increased use of motor cycles in the recent years for various demands could worsen air quality, only few studies have been conducted on estimation of emission factors and characterization of emissions from motorcycle. In this study, emissions from selected six models of motorcycle based on largest market share and production rate were investigated. To investigate gaseous and carbonaceous air pollutants, such as carbon monoxide (CO), total hydrocarbon (THC), nitrogen oxide ($NO_x$), elemental carbon (EC) and organic carbon (OC), total 124 motorcycles between 2003 and 2007 model year were tested with regulatory driving conditions, such as CVS-40 and CVS-47 mode. These motorcycles were further sub-categorized based on their displacement (< 50 cc, 50~150 cc, and $\geq$ 150 cc), type of stroke (2- and 4 strokes) and model year (2003~2005 and 2006~2007). Tested motorcycles with recent model year (2006~2007) exhibited less emissions of regulatory gaseous and carbonaceous air pollutants compared to old model year (2003~2005). Chemical analysis showed that CO present in highest concentration followed by THC and $NO_x$ for all tested motorcycles. Interestingly, two strokes motorcycle produced higher THC emission but less CO and $NO_x$ than those of four strokes. For all types of displacement and stroke, emission factors (gram per kilometer) of THC and CO except $NO_x$ with recent model year (2006~2007) showed decreased trend compared to old model year (2003~2005). In addition to this, due to mixed combustion between gasoline fuel and lubricant, two strokes motorcycle showed OC > EC emission trend.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5156-5161
• /
• 2013

In distributed spatial data stream processing, processed tuples of downstream nodes are replicated to the upstream node in order to increase the utilization of distributed nodes and to recover the whole system for the case of system failure. However, while the data input rate increases and multiple downstream nodes share the operation result of the upstream node, the data which stores to output queues as a backup can be lost since the deletion operation delay may be occurred by the delay of the tuple processing of upstream node. In this paper, the adaptive upstream backup scheme based on operation throughput in distributed spatial data stream system is proposed. This method can cut down the average load rate of nodes by efficient spatial operation migration as it processes spatial temporal data stream, and it can minimize the data loss by fluid change of backup mode. The experiments show the proposed approach can prevent data loss and can decrease, on average, 20% of CPU utilization by node monitoring.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.663-670
• /
• 2017

The purpose of this study is to define On-line Video Syllabus Template which is based on adaptive mode with interaction.A syllabus has the significance as a teaching and learning plan. However, it has not only been considered as a formal document, has also been limited into a simple query since it has been made into a fragmentary structure, lacking of link between other services and reuse. Additionally, this paper is aimed to design three-dimensional syllabus which makes it possible to provide students with practical information related to teaching and learning and share it with teachers and students. The following is the technique proposed in this paper. It is made to be served for the Syllabus centered on teaching and learning, which is including the definition of hierarchy structure, the media contents application according to the learner's preference and real-time variation function. On-line Video Syllabus provided through LMS has availability and credibility of teaching and learning, in that it enable increased utilization by strengthening convenience.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.179-191
• /
• 2018

This study is aimed at investigating the dynamic performance of a composite building structure under seismic ground motions. The building structure is an official fire department building located in southern Taiwan. It is composed of a seven-story reinforced concrete (RC) and an eight-story steel reinforced concrete (SRC) frame. Both frames share a common basement and are separated by expansion joints from the first to the seventh floor. Recorded floor accelerations of the building structure under eight earthquakes occurring during the period from 2011 to 2013 were examined in this paper. It is found that both frames had similar floor acceleration amplifications in the longitudinal direction, while the SRC frame revealed larger response than the RC frame in the transverse direction. Almost invariant and similar fundamental periods under the eight earthquakes in both directions were obtained from their transfer functions. Furthermore, numerical time-history simulations were carried out for the building structure under the most intensive earthquake. It is realized that the seismic response of the composite building was dominated by the first translational mode in each horizontal direction. Higher modes did not significantly contribute to the structural response. The conventional Rayleigh damping model could be appropriately applied to the time-history simulations under bi-directional excitations. Approximate floor acceleration envelopes were obtained with a compound RC and SRC structural model by using the average damping ratios determined from the different structural arrays.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.4109-4114
• /
• 2015

Background: Full-field digital mammography (FFDM) with dense breasts has a high rate of missed diagnosis, and digital breast tomosynthesis (DBT) could reduce organization overlapping and provide more reliable images for BI-RADS classification. This study aims to explore application of COMBO (FFDM+DBT) for effect and significance of BI-RADS classification of breast cancer. Materials and Methods: In this study, we selected 832 patients who had been treated from May 2013 to November 2013. Classify FFDM and COMBO examination according to BI-RADS separately and compare the differences for glands in the image of the same patient in judgment, mass characteristics display and indirect signs. Employ Paired Wilcoxon rank sum test was used in 79 breast cancer patients to find differences between two examine methods. Results: The results indicated that COMBO pattern is able to observe more details in distribution of glands when estimating content. Paired Wilcoxon rank sum test showed that overall classification level of COMBO is higher significantly compared to FFDM to BI-RADS diagnosis and classification of breast (P<0.05). The area under FFDM ROC curve is 0.805, while that is 0.941 in COMBO pattern. COMBO shows relation of mass with the surrounding tissues, the calcification in the mass, and multiple foci clearly in breast cancer tissues. The optimal sensitivity of cut-off value in COMBO pattern is 82.9%, which is higher than that in FFDM (60%). They share the same specificity which is both 93.2%. Conclusions: Digital Breast Tomosynthesis (DBT) could be used for the BI-RADS classification in breast cancer in clinical.