• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.554-561
• /
• 2003

Results of the numerical simulation and experimental data analysis for identification of mode cutoff frequency and estimation of sound speed of seabed from the spectrum of acoustic signal received at fixed source-receiver range are presented. Model simulations for Pekeris waveguide show that the frequency-dependent propagation loss and interference pattern are closely related to mode cutoff frequencies and it could be possible to the identify them from the changes of interference pattern. The concept considered at numerical simulations is applied to signals acquired at sea test. Cutoff frequency and sound speed of seabed are estimated from the interference pattern of measured signal. Propagation loss predicted using the estimated sound speed of seabed as model input parameter shows similar estimation result compared to propagation loss derived from measured data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1000-1009
• /
• 2008

The purpose of this paper is to analyze the performance of MB-OFDM UWB system when the interference signal that can be WIMAX signal or 4 G system signal is received by detection limit of -80 dBm/MHz proposed in Korea for DAA(Detect And Avoid) to permit UWB in $3.1{\sim}4.8$ GHz. MB-OFDM UWB system supports two transmission modes; one is TFI(Time frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. In this paper, we considered the TX average power and the synchronization structure to reflect the effect of frequency hopping according to TFC. Interference analysis results show that the WiMAX system is fenced thoroughly from UWB interference in domestic DAA regulation, but the performance of MB-OFDM UWB system is degraded seriously by an interference signal with the DAA detection limit even in frequency Hopping mode that can get frequency diversity effect.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3E
• /
• pp.9-20
• /
• 1999

To investigate the characteristics of internal waves (IWs) and their effects on acoustic wave propagation, a series of sea experiment were performed in the east coast of Donghae city, Korea in 1997 and 1998 where the water depth varies between 130 and 140 m. Thermistor strings were deployed to measure water temperatures simultaneously at 9 depths. CW source signals with the frequencies of 250,670 and 1000 Hz were received by an array of 15 hydrophones. Through the Wavelet transform analysis, the IWs are characterized as having typical periods of 2-17 min and duration of 1-2 hours. The IWs exist in a group of periods rather than in one period. Underwater acoustic signals also show obvious energy peaks in the periods of less than 12 min. Consistency in the periods of the two physical processes implies that acoustic waves react to the IWs through some mechanisms like mode interference and travel time fluctuation. Based on the thermistor string data, mode arriving structures are analyzed. As thermocline depth varies with time, it may cause travel time difference as much as 4-10 ms between mode 1 and 2 over 10 km range. This travel time difference causes interference among modes and thus fluctuation from range-independent stratified ocean structure. In real situations, however, there exist additional spatial variation of IWs. Model simulations with all modes and simple IWs show clear responses of acoustic signals to the IWs, i.e., fluctuations of amplitude and phase.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3431-3445
• /
• 2017

Due to the advantages of low transmit power consumption, high spectral efficiency and extended system coverage, Device-to-Device (D2D) communication has drawn explosive attention in wireless communication field. Considering that intra-cell interference caused between cellular signals and D2D signals, in this paper, a network coding-based D2D relay cooperative transmission algorithm is proposed. Under D2D single-hop relay transmission mode, cellular interfering signals can be regarded as useful signals to code with D2D signals at D2D relay node. Using cellular interfering signals and network coded signals, D2D receiver restores the D2D signals to achieve the effect of interference suppression. Theoretical analysis shows that, compared with Amplify-and-forward (AF) mode and Decode-and-forward (DF) mode, the proposed algorithm can dramatically increase the link achievable rate. Furthermore, simulation experiment verifies that by employing the proposed algorithm, the interference signals in D2D communication can be eliminated effectively, and meanwhile the symbol error rate (SER) performance can be improved.

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.24-27
• /
• 2010

A novel stereo 3D LCD for passive interference filter glasses is presented. A demonstrator based on a standard 120Hz LCD was set up. Stereoscopic image separation was realized in a time-sequential mode using a LED-based scanning backlight with two complementary spectra. A stereo brightness of 3 cd/$m^2$ and a channel separation of 30:1 were achieved.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.367-372
• /
• 2009

In this paper we propose an electronic domain timing phase selection scheme for the optical communication systems suffering from inter-symbol-interference (ISI) distortion due to chromatic dispersion (CD) or polarization mode dispersion (PMD). In the presence of CD/PMD a proper timing phase selection is important for discrete time domain equalizers, since different timing phases produce different nonlinear ISI channels of different severity. The proposed timing phase recovery scheme based on dispersion minimization (DM) practically approximates the optimal minimum mean squared error (MMSE) timing phase without training signals which reduces overall throughput substantially, especially in time-varying channels such as PMD. The simulation results show that the proposed DM timing agrees with MMSE timing phase, under proper normalization of the received signals, for various dispersion and OSNR.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.43-50
• /
• 2007

A range-frequency interference pattern is analyzed in the course of the propagation of ship noise in shallow water. It has been shown to exhibit striated bands of intensity maxima and minima in the spectrogram. The slope of the striations is an invariant of the modal interference and is described by a waveguide invariant parameter $\beta$. It turns out that this interference pattern is useful for identifying the physical properties of the waveguide such as seabed properties. In this article, the interference pattern is analyzed using image processing techniques to produce the distribution of the beta and the effects of sediment types and geoacoustic parameters on beta distribution are examined and characterized by moments of the distributions.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.78-83
• /
• 2015

In this paper, when WLAN repeater of satellite communication package system as a novel wireless disaster communication network connected to LTE D2D mobile terminal, we analyzed radio channel interference from WLAN and WPAN system of adjacent same ISM band using Monte-Carlo method. In this study, WLAN cell radius was determined using Extended Hata Model considering practical environment, and simulated physical protection distance and density in the dense-mode to minimize interference from WLAN, Bluetooth, and ZigBee. Simulation results, WLAN repeater can be operated with 15 WLAN interferer over 130m distance, 23 Bluetooth interferer over 100m distance, and with 62 ZigBee interferer over 83m distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1648-1655
• /
• 2001

TD-CDMA is based on a combination of CDMA, TDMA, and TDD technologies, and it is proposed to support TDD mode for IMT-2000 service. To analyze the performance of TD-CDMA, we have to establish a modeling technique that takes into account the interference that can occur in each scheme. There is special interference in TDD mode, e.g. interference from base station to base station and from mobile to mobile. In this paper, we present an interference model for analyzing the performance of TD-CDMA systems and the slot allocation strategies. This model includes the cell synchronization error. As a result, this paper shows that almost equal slot allocation and low cell synchronization error guarantee desirable performance in TD-CDMA.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.923-930
• /
• 2018

Based on the application of an integrated dynamic brake (IDB) system that uses a PWM inverter fed-AC motor drive to operate the piston, a new active zero state PWM (AZSPWM) is proposed to improve the stability and reliability of the IDB system by suppressing the conducted electro-magnetic interference (EMI) noise under a wide range of load torque. The new AZSPWM reduces common-mode voltage (CMV) by one-third when compared to that of the conventional space vector PWM (CSVPWM). Although this method slightly increases the output current ripple by reducing the CMV, like the CSVPWM, it can be used within the full range of the load torque. Further, unlike other reduced common-mode voltage (RCMV) PWMs, it does not increase the switching power loss. A theoretical analysis is presented and experiments are performed to demonstrate the effectiveness of this method.