• Korea-Australia Rheology Journal
• /
• 제17권4호
• /
• pp.191-198
• /
• 2005

The static and dynamic rheological behavior of concentrated sodium dodecylsulfate (SDS) stabilized, deformability controllable polydimethylsiloxane (PDMS) emulsions is reported and comparisons made with silica (hard sphere) suspensions. Steady-mode measurements indicate 'hard' (viscoelastic) droplets behave as hard spheres, while 'soft' (viscous) droplets induce structural flexibility of the emulsion against shear. Dynamic-mode measurements reveal that viscoelasticity of droplets provides the great magnitude of elasticity for the 'hard' emulsion, while formation of planar films between droplets is the origin of the elasticity of 'soft' emulsions. Combination of steady and dynamic rheological behavior has enabled depiction of droplet structure evolution in relation to the shear stress applied, especially by taking advantage of the normal force that reflects the transient deformation of droplets.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.461-474
• /
• 2020

Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0°, 30° and 90°, incompatible deformations are closely related to rock damage. At 60°, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.438-438
• /
• 2010

The abnormal behavior of the argon metastable density during the E-H mode transition in argon ICP discharge was investigated. Lots of investigations including global models expected that during and after the mode transition of ICP discharge, the density of metastable increases with applied rf power (i.e. electron density). However, recent direct measurement of metastable density revealed that the metastable density of argon decreases with the applied power during and after the mode transition. This result may not be explained by the previous global model which is based on the assumption of the Maxwellian electron energy distribution function (EEDF). In this paper, to explain this abnormal behavior with simple manners, a simple global model taking account of the effect of the non-Maxwellian EEDFs incorporating into a set of coupled rate equations is proposed. The result showed that the calculated metastable density taking account of non-Maxwellian EEDF and its evolution during the transition has an abnormal behavior with electron density and is in good agreement with the previous measurement results, indicating the close coupling of electron kinetics and the behavior of metastable density. The proposed simple model is expected to provide qualitative kinetic insight to understand the behavior of the metastable density in various plasma discharges which typically exhibit non-Maxwellian distribution.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.111-120
• /
• 1998

To predict and evaluate metallurgical and mechanical behavior of th welds, it is essential to understand solidification behavior and microstructural evolution experienced in the welds, neither of which follows the equilibrium phase diagram because of rapid heating and cooling conditions. Metallurgical phenomena in austenitic stainless steel fusion welds, types 304, 309S, 316L, 321 and 304N, were investigated in this study. Autogenous GTA welding was performed on weld coupons, and primary solidification mode and phase distribution were investigated from the welds. Varestraint test was employed to evaluate solidification cracking susceptibilities of the alloys. GTA weld fusion zones in type 304, 321 and 304N stainless steels experienced primary ferrite solidification while those in type 309S primary austenite solidification. Type 316L exhibited a mixed type of primary ferrite and primary austenite solidification. The primary solidification mode strongly depended on $Cr_{eq}/Ni_{eq}$ ratio. In terms of solidification cracking susceptibility, type 309S that solidified as primary austenite exhibited high cracking susceptibility while the alloys experienced primary ferrite solidification showed low cracking susceptibility. The relative ranking in solidification cracking susceptibility was type 304=type 304N < type 321 < type 316L < type 309S.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.72-72
• /
• 2011

Recently, Zinc oxide (ZnO) nano-structures have been received attractive attention because of their outstanding optical and electrical properties. It might be a promising material considered for applications to photonic and electronic devices such as ultraviolet light emitting diode, thin film transistor, and gas sensors. ZnO nano-structures can be typically synthesized by the VLS growth mode and self-assembly. In the VLS growth mode using various growth techniques, the noble metal catalysts such as Au and Sn were used. However, the growth of ZnO nano-structures on nano-crystalline Au seeds using radio frequency (RF) magnetron sputtering might be explained by the profile coating, i.e. the ZnO nano-structures were a morphological replica of Au seeds. Ga doped ZnO (ZnO:Ga) nano-structures using this concept were synthesized and characterized by XRD, AFM, SEM, and TEM. We found that surface morphology is drastically changed from initial islands to later sun-flower typed nano-structures. We will present the structural evolution of ZnO:Ga nano-structures with increasing the film thickness.

• 한국통신학회논문지
• /
• 제32권6A호
• /
• pp.558-564
• /
• 2007

무선 성능 향상을 통해 다양한 이동 멀티미디어 서비스 제공을 목표로 하는 3G Long Term Evolution (3G LTE)은 Packet Switching (PS) 도메인에서 VoIP 기반 음성 서비스를 제안하고 있다 패킷 지연과 손실에 민감한 VoIP 트래픽을 PS 도메인을 통해 처리할 경우 기존 3G 시스템의 CS 도메인 기반 음성 서비스와 달리 여러 가지 기술적 어려움이 예상된다. 더욱이 OFDM을 물리계층으로 채택한 3G LTE는 Physical Resource Block (PRB) 단위로 전송 자원을 관리함에 따라 새로운 자원관리 방식 개발도 필요하게 된다. 본 논문에서는 3G LTE 의 VoIP 기반 음성 서비스를 위한 MAC 계층의 PRB 할당 스케줄링 알고리즘을 제안하고 시뮬레이션을 통한 검증 결과를 보인다. 알고리즘의 핵심은 VoIP 우선 모드를 동적으로 활성화하여 VoIP 서비스의 QoS를 보장하고, 이러한 우선 모드 적용으로 인한 시스템 자원효율성 저하를 최소화하기 위해 우선 모드 지속시간을 적응적 조절하는 것이다.

• Geomechanics and Engineering
• /
• 제28권4호
• /
• pp.335-346
• /
• 2022

Buckling failure is a typical slope instability mode that should be paid more attention to. It is difficult to provide systematic guidance for the monitoring and management of such slopes due to unclear mechanism. Here we examine buckling failure as the potential instability mode for a slope above a railway tunnel in southwest China. A comprehensive model test system was developed that can be used to conduct buckling failure experiments. The displacement, stress, and strain of the slope were monitored to document the evolution of buckling failure during the experiment. Monitoring data reveal the deformation and stress characteristics of the slope with different slipping mass thicknesses and under different top loads. The test results show that the slipping mass is the main subject of the top load and is the key object of monitoring. Displacement and stress precede buckling failure, so maybe useful predictors of impending failure. However, the response of the stress variation is earlier than displacement variation during the failure process. It is also necessary to monitor the bedrock near the slip face because its stress evolution plays an important role in the early prediction of instability. The position near the slope foot is most prone to buckling failure, so it should be closely monitored.

• 한국차세대컴퓨팅학회논문지
• /
• 제13권1호
• /
• pp.7-21
• /
• 2017

4세대 이동통신 시스템에 적용되는 다중 안테나 기술은 전송 환경과 안테나 설정에 따라 성능이 영향을 받는다. 본 논문에서는 실내 환경에서 다양한 다이버서티 전송 기법과 전파 조건을 고려하여 LTE(Long-term Evolution) MIMO(multiple-input multiple-output) 기술의 성능을 평가하였다. 특히, 다양한 실내 전파 환경에 대한 매체 접속 제어 처리률 (MAC TP)과 LTE 시스템 관련 파라미터들이 분석되었으며, 전송 다이버서티와 단일 안테나 모드에서의 MIMO 성능을 비교 분석하였다. 성능 평가 분석 결과는 다양한 실내 채널 환경에 대한 LTE 2×2 MIMO 안테나 설정에 대한 기준을 제시하고 더 나아가 안테나 제조업자 및 네트워크 운용자들을 위한 기준으로 활용될 수 있다.

• 한국통신학회논문지
• /
• 제35권1C호
• /
• pp.103-112
• /
• 2010

본 논문에서는 3GPP(3rd Generation Partnership Project) LTE(Long Term Evolution) FDD(Frequency Division Duplexing) / TDD(Time Division Duplexing) 듀얼 모드 하향 링크 수신기를 위한 주파수 동기 알고리즘을 제안한다. 일반적으로 3GPP LTE OFDMA(Orthogonal Frequency Division Multiple Access) 시스템에서의 대략적 주파수 동기는 PSS(Primary Synchronization Signal)를 이용한 상관 방식이 적용되며, 미세 주파수 동기는 OFDMA 심볼의 보호 구간(CP: Cyclic Prefix) 상관 방식이 적용된다. 그러나 기존의 대략적 주파수 동기 알고리즘들은 페이딩 환경에서 상관 패턴의 열화와 잡음의 제곱으로 인한 SNR(Signal to Noise Ratio) 손실로 충분한 성능 이득을 얻지 못한다. 또한 주파수 분할을 통하여 양방향 송수신되는 FDD 모드와 달리 TDD 모드에서는 상향링크 구간과 하향링크 구간이 시분할로 전송되기 때문에 TDD 모드에서 기존 미세 주파수 동기 알고리즘은 상향링크와 하향링크의 신호 전력의 차이로 인해 안정적인 동작을 수행할 수 없다. 따라서 본 논문에서는 기존 방식의 문제점을 분석하고, 이를 기반으로 3GPP LTE FDD 모드뿐 아니라, TDD 모드에서도 안정적인 동작이 가능한 주파수 동기 알고리즘을 제안하였다. 다양한 환경에서의 컴퓨터 모의실험을 통해 제안된 주파수 동기 알고리즘은 기존 방식들에 비해 우수한 성능을 보이며, 3GPP LTE FDD/TDD 듀얼 모드 하향 링크 수신기에서 안정적인 동작이 가능함을 입증하였다.

• Journal of Astronomy and Space Sciences
• /
• 제12권1호
• /
• pp.21-29
• /
• 1995

$\beta$ Lyrae형 식쌍성 AW Cam을 UBV 세파장 영역에서 광전 관측하여 얻은 UBV 광도곡선을 Wilson and Devinney 쌍성 모델의 2가지 mode( mode 2와 mode 5)로 분석하였다. 이는 Russo and Milano (1983)가 산출한 측광 질량비(q=0.21)와 Mammano et al. (1967)의 분광질량비(q=0.43)가 일치하지 않는 모순-AW Cam 계의 남아 있는 문제인-올 해결하기 위한 것이다. Mode 2로 구한 측광학적 해가 mode 5로 구한 해보다 관측된 광도곡선을 더 잘 반영하는 것으로 계산되었다. 이는AW Cam이 정상준분리형계가 아나라 분리형 쌍성계임을 제시하는 것으로 해석될 수 있다. 또한 산출한 질량비 (q=0.43)로 계산한 AW Cam계의 삼차원 로쉬 모형을 보면 가벼운 반성은 안쪽 로쉬 한계면에 잘 들어 있는 반연 더 무거운 주성이 로쉬 한계면에 거의 접촉하고 있다. 로쉬 기하, 공전주기의 일정성, 그리고 다른 측광학적 증거들로 부터 AW Cam은 Giuricin and Mardrossian (1981)이 제안한 ‘접촉이 깨진 상태’에 있는 진화된 분리형 쌍성계가 아니라, ‘접촉 상태’로 가고 있는case A 진화 상 태에 있는 덜 진화된 분리형 쌍성계로 잠정적으로 결론짓는다