• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.109-109
• /
• 1999

The standard RELAP5/MOD3.2 code was modified using the non-iterative modeling. which is developed to simulate steam condensation in the presence of noncondensable gases ill a vertical tube. The modified RELAP5/MOD3.2 code was used to simulate two kinds of vertical in-tube experiments involving the condensation phenomenon in the presence of noncondensable gases. The modeling capabilities of the modified RELAP5/MOD3.2 codc as well as the standard code for the condensation in the presence of noncondensable gases are assessed using two PCCS condensation experiments and four reflux condensation experimcnts. The modified RELAP5/MOD3.2 code gives good prediction over the data of both PCCS condensation and reflux condensation experiments

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권3호
• /
• pp.9-12
• /
• 2005

[ $Y_1Ba_2Cu_3O_{7-8}$ ] (YBCO) coated conductor has been fabricated by batch-type process using oxide-precursor-based metal-organic deposition (MOD) method. The batch-type process can be scaled up more simply to Produce long-length YBCO conductor than the reel-to-reel process. Also, it has less handling problems and is adequate to the ambient gas environment. In this work, YBCO oride powder was used as a starting precursor for MOD method. After reel-to-reel dip coating process, me ter-long-buffered metal tape was wound around a cylinder and underwent calcination and annealing processes. Annealed YBCO films showed good c-axis alignment and dense surface morphology with no cracks, but exhibited very low critical current density of $10^5\;A/cm^2$.

• 대한수학회보
• /
• 제56권6호
• /
• pp.1385-1422
• /
• 2019

Let p be an odd prime. The algebraic structure of all negacyclic codes of length $8_{p^s}$ over the finite commutative chain ring ${\mathbb{F}}_{p^m}+u{\mathbb{F}}_{p^m}$ where $u^2=0$ is studied in this paper. Moreover, we classify all negacyclic codes of length $8_{p^s}$ over ${\mathbb{F}}_{p^m}+u{\mathbb{F}}_{p^m}$ into 5 cases, i.e., $p^m{\equiv}1$ (mod 16), $p^m{\equiv}3$, 11 (mod 16), $p^m{\equiv}5$, 13 (mod 16), $p^m{\equiv}7$, 15 (mod 16) and $p^m{\equiv}9$ (mod 16). From that, the structures of dual and some self-dual negacyclic codes and number of codewords of negacyclic codes are obtained.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.6-9
• /
• 2008

We have investigated the MOD process successfully for the fabrication of the YBCO thick film on the $LaAlO_3$(001) single crystalline substrate. The cracking problem in YBCO thick film, a serious problem in the conventional TFA-MOD method, could be overcome with a careful control of precursor materials. Thus coating solution was prepared for the YBCO thick film by using fluorine-free precursor material. The precursor solutions were coated on the LAO(001) single crystalline substrate using the dip coating method, calcined at the temperature up to $500^{\circ}C$, and fired at various high temperatures for 2 h in a reduced oxygen atmosphere. Optimally processed YBCO thick film exhibited high critical current($I_c$) over 200 A/cm-width at 77K in self-field.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권1호
• /
• pp.23-25
• /
• 2006

Optimization of process variables, including oxygen and water partial pressure and also an nesting temperature, was performed in batch-type process to fabricate YBCO films on LaAlO3 single crystal. In this work, YBCO oxide powder was used as a starting precursor for metal-organic deposition(MOD)method. The precursor films were fabricated in batch furnace and they were converted to the epitaxial YBCO films at the same furnace with varying the process variables. The oxygen partial pressure was varied from 100ppm to 2000ppm and the water partial pressure from 1.2% to 12.2%. The window for optimal P(O2) was narrow about 700ppm for batch-type process. YBCO films in bathc-thype MOD process were optimized at 740-770oC and P(H2O) of 2.3%-7.3%.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.407-409
• /
• 2015

가우시안 혼합 모델(GMM)과 배경 차분 기법을 이용한 이동 객체 검출(MOD) 알고리듬을 하드웨어로 구현하였다. 구현된 MOD 프로세서는 EGML(Effective Gaussian Mixture Learning)을 기반으로 배경을 생성하고 업데이트하며, EGML 계산 일부의 근사화를 통해 하드웨어 복잡도를 줄였고, 파이프라이닝 기법을 통해 동작속도를 개선하였다. 또한 가우시안 파라미터들을 가변시킬 수 있도록 함으로써 다양한 조건에서 이동 객체 검출 성능이 향상되도록 구현하였다. 설계된 회로는 FPGA-in-the-loop방식으로 하드웨어 동작을 검증하였으며, XC5VSX95T FPGA 디바이스에서 최대 109 MHz의 클록 주파수로 동작 가능한 것으로 평가되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권1호
• /
• pp.5-8
• /
• 2006

The growth properties of MOD-YBCO films were investigated. To enhance the growth rate of YBCO layer and inhibit the build-up of HF gas during the annealing process in TFA-MOD for YBCO coated conductors the method of low pressure annealing was employed. Total pressure was changed from 700Torr to 1Torr and its effect on growth of YBCO films was compared with atmospheric one. The lower Pressure was effective to control of the pore size in MOD method . Surface morphology of YBCO films processed at low total pres sure was rough and composed of random YBCO (103) grains. But large pores, usually observed at atmospheric process in MOD disappeared and also the number of pores was reduced at low pressure annealing. Also discussed ate the effects of Fluorine-free Y and Cu precursor solution on the development of microstructure. Dense surface me phology and with less and small pores can be provided through controlling Fluorine content.

• Nuclear Engineering and Technology
• /
• 제26권2호
• /
• pp.265-276
• /
• 1994

FLECHT-SEASET 실험에 대한 REIAP5/MOD3 평가시에 밝혀진 코드결함을 수정하기 위하여 RELAP5/MOD3 재관수 모델을 개선하였다. 모델개선은 재관수 열전달 모델의 수정과 분산유동영역의 액적 크기의 조절을 통하여 이루어졌으며 재관수 계산시 발생되는 압력 spike와 수위진동 등의 결함을 개선하기 위하여 벽면비등모델의 time-smoothing과 천이 유동시의 level tracking모델도 첨가되었다. FLECHT-SEASET 실험에 대한 개선모델의 검증과 발전소의 대형냉각재 상실 사고해석 응용에서 코드결함이 개선되었음을 알 수 있었다.

• 한국정보통신학회논문지
• /
• 제21권12호
• /
• pp.2213-2220
• /
• 2017

EGML (Effective Gaussian Mixture Learning) 기반의 배경차분 기법을 이용한 이동객체 검출 (Moving Object Detection; MOD) 프로세서의 효율적인 하드웨어 구현 방식을 제안한다. 하드웨어 복잡도를 감소시키기 위해 배경 생성에 사용되는 일부 연산을 근사화하여 구현하였으며, 배경차분과 가우시안 계산의 나눗셈 연산에 사용되는 하드웨어 자원이 공유되도록 설계하였다. 설계한 MOD 프로세서는 MATLAB/Simulink를 이용한 HDL-netlist 시뮬레이션과 FPGA-in-the-loop 방식을 통해 기능을 검증하였다. IEEE CDW-2014 데이터 세트의 6가지 영상을 입력으로 사용하여 MOD 성능을 평가한 결과, 평균 재현율(recall)은 0.7700, 평균 정밀도(precision)는 0.7170, F-measure가 0.7293으로 평가되었다. Xilinx ISE를 이용하여 FPGA 합성한 결과, Virtex5 XC5VSX95T 디바이스에서 총 882 슬라이스와 $146{\times}36kbit$의 블록 램으로 구현되었으며, 동일한 알고리듬을 적용한 기존의 구현 사례에 비해 약 60%의 하드웨어를 감소시켰다. MOD 프로세서는 최대 75 MHz의 클록 주파수로 동작하여 $800{\times}600$ 해상도의 영상에 대해 39 fps의 성능으로 실시간 처리가 가능한 것으로 평가되었다.

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.336-345
• /
• 2020

Objective: To investigate the treatment modalities (Tx-Mods) for patients with unilateral hemifacial microsomia (UHFM) according to Pruzansky-Kaban types and growth stages. Methods: The samples consisted of 82 Korean UHFM patients. Tx-Mods were defined as follows: Tx-Mod-1, growth observation due to mild facial asymmetry; Tx-Mod-2, unilateral functional appliance; Tx-Mod-3, fixed orthodontic treatment; Tx-Mod-4, growth observation due to a definite need for surgical intervention; Tx-Mod-5, unilateral mandibular or bimaxillary distraction osteogenesis (DO); Tx-Mod-6, maxillary fixation using LeFort I osteotomy and mandibular DO/sagittal split ramus osteotomy; Tx-Mod-7, orthognathic surgery; and Tx-Mod-8, costochondral grafting. The type and frequency of Tx-Mod, the number of patients who underwent surgical procedures, and the number of surgeries that each patient underwent, were investigated. Results: The degree of invasiveness and complexity of Tx-Mod increased, with an increase in treatment stage and Pruzansky-Kaban type (initial < final; [I, IIa] < [IIb, III], all p < 0.001). The percentage of patients who underwent surgical procedures increased up to 4.2 times, with an increase in the Pruzansky-Kaban type (I, 24.1%; IIa, 47.1%; IIb, 84.4%; III, 100%; p < 0.001). However, the mean number of surgical procedures that each patient underwent showed a tendency of increase according to the Pruzansky-Kaban types (I, n = 1.1; IIa, n = 1.5; IIb, n = 1.6; III, n = 2.3; p > 0.05). Conclusions: These findings might be used as basic guidelines for successful treatment planning and prognosis prediction in UHFM patients.