• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.555-563
• /
• 2006

Recently, many bridges become not only functionally obsolete of bridge deck due to inadequate width but also structurally deficient of substructure due to erosion. In these cases, widening is almost always more economical than complete replacement, and therefore there is a need to make available the results of research and field experience pertaining to the widening of bridge substructure. But, an experimental study for the guarantee of unification between existing and new substructure with adhesive anchor is so insufficient that the development of adhesive anchor system for the unification should be settled promptly. The purpose of the present study is to explore pull out and shear characteristics of adhesive anchor system. For this purpose, several series of concrete specimens have been tested. Major test variables were the bonded length, anchor diameter and anchor slope. The pull out strength, bond stress and shear strength of adhesive faces were measured for the specimens. The present study indicates that the pull out strength increased with more bonded length and more anchor diameter, and that the bond stress decreased with more bonded length and more anchor diameter. The pull out strength and the bond stress increases with more anchor slope and it is considered that the slope of $5^{\circ}$ was more efficient. From the shear tests, it is supposed that anchor diameters more than D19 was proper to the adhesive anchor. Finally, it is expected that both experimental data in these tests and further study including mock-up tests will contribute to the establishment of the unification between existing and new substructure with adhesive anchor.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.36-36
• /
• 2022

The molecular understanding of resistance and susceptibility of host plants to scab, a most threatful disease to pome fruit production worldwide, is very limited. Comparing resistant line '93-3-98' to susceptible one 'Sweet Skin' at seven time points of 0, 0.5, 1, 2, 3, 4, 8 days post inoculation, RNA-sequencing data derived from infected and mock-inoculated young leaves were analyzed to evaluate the tolerant response and to mine candidate genes of pear to the scab pathogen Venturia nashicola. Analysis of the mapped reads showed that the infection of V. nashicola led to significant differential expression of 17,827 transcripts with more than 3-fold change in the seven pairs of libraries, of which 9,672 (54%) are up- and 8,155(46%) are down-regulated. These included mainly receptor (NB-ARC domains-containing, CC-NBS-LRR, TIR-NBS-LRR, seven transmembrane MLO family protein) and transcription factor (ethylene responsive element binding, WRKY DNA-binding protein) related gene. An arsenal of defense response of highly resistant pear accessions derived from European pear was probably supposed no sooner had V. nashicola infected its host than host genes related to disease suppression like Polyketide cyclase/dehydrase and lipid transport protein, WRKY family transcription factor, lectin protein kinase, cystein-rich RLK, calcium-dependent phospholipid-binding copine protein were greatly boosted and eradicated cascade reaction induced by pathogen within 24 hours. To identify transcripts specifically expressed in response to V. nashicola, RT-PCRs were conducted and compare to the expression patterns of seven cultivars with a range of highly resistant to highly susceptible symptom. A DEG belonging to the PR protein family genes that were higher expressed in response to V. nashicola suggesting extraordinary role in the resistance response were led to the identification. This study provides the first transcriptional profile by RNA-seq of the host plant during scab disease and insights into the response of tolerant pear plants to V. nashicola.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.111-120
• /
• 2023

Indoor air quality has become increasingly important with the increase in time spent in residential environments, impact of external fine dust, yellow dust, and the post-COVID 19 pandemic. Residential mechanical ventilation plays a key role in addressing indoor air quality. The legal standard for residential air changes per hour in Korea is 0.5 ACH. However, there are no standards for the location of supply and return vents. This study atempts to analyze the impact of ventilation performance based on the location of supply and return vents. An experiment was conducted using the CO₂ tracer gas concentration decay method in a mock-up house set inside a large chamber to minimize external influences. The experimental results indicated that the commonly used combination of 2 supply and 2 return vents in living room spaces had a lower mean age of air than the combination of 1 supply and 2 return vents. Using multiple supply and return vents had lower mean age of air than using just 1 supply and 1 return vent.

• Korean Journal of Environmental Biology
• /
• v.32 no.1
• /
• pp.58-67
• /
• 2014

The outdoor mass cultivation is not possible for microalgae in Korea all year round, due to cold winter season. It is not easy to maintain proper level of productivity of microalgae even in winter. To prevent a drastic decrease of temperature in a greenhouse, two layers were covered additionally, inside the original plastic layer of the greenhouse. The middle layer was made up of plastic and the inner layer, of non-woven fabric. Acrylic transparent bioreactors were constructed to get more sunlight, not only from the upper side but also from the lateral and bottom directions. In winter at freezing temperatures, six different culture conditions were compared in the triply covered, insulated greenhouse. Wastewater after anaerobic digestion was used for the cultivation of microalgae to minimize the production cost. Water temperature in the bioreactors remained above $10^{\circ}C$ on average, even without any external heating system, proving that the triple-layered greenhouse is effective in keeping heat. Algal biomass reached to 0.37g $L^{-1}$ with the highest temperature, in the experimental group of light-reflection board at the bottom, with nitrogen and phosphorus removal rate of 92% and 99%, respectively. When fatty acid composition was analyzed using gas-chromatography, linoleate (C18 : 3n3) occupied the highest proportion up to 61%, in the all experiment groups. Chemical oxygen demand (COD), however, did not decrease during the cultivation, but rather increased. Although the algal biomass productivity was not comparable to warm seasons, it was possible to maintain water temperature for algae cultivation even in the coldest season, at the minimum cost.

• Journal of Nutrition and Health
• /
• v.51 no.5
• /
• pp.433-444
• /
• 2018

Purpose: This study examined the status and needs of school-based nutritional education programs for reducing sugars intake in elementary schools. Methods: A total of 230 elementary nutrition teachers participated in this study through an online survey in July 2017. Results: Approximately one-third of the schools conducted nutrition education on reducing sugars intake as a main topic. The most frequent educated grade and education period were $4^{th}$ and $3^{rd}$ grade, and once a year. Most of the nutrition teachers answered that nutrition education related to reducing sugars intake for children was necessary. The nutrition teachers answered that first graders were the recipients in most need of nutrition education for reducing sugars but, realistically, third graders were the most suitable for nutrition education. The appropriate education topics were limited to the lower grades, such as sugars consumption related health problems, foods containing high sugars, and behaviors to reduce sugars intake; however, a wider variety of topics were selected for the upper grades. The experiment was considered to be an effective educational method for both the lower and upper grades. The most appropriate nutrition education media appeared to be a mock-up in the lower grades, and an experiment kit in the upper grades. Games and videos were highly considered to be effective media to educate students in reducing sugars consumption by voluntary participation in free time in the classroom in both the lower and upper grades. Conclusion: Nutrition education programs focusing on sugars intake reduction were conducted in some elementary schools, but the training time was short and the types of activities were limited. The perception and demand for nutrition education was very high. Therefore, the development and dissemination of elementary school-based nutritional education programs for sugars intake reduction is urgently needed. Moreover, to develop an effective nutrition education program, the education environment and demand in the field should be fully considered.

• Childhood Kidney Diseases
• /
• v.5 no.2
• /
• pp.164-175
• /
• 2001

Purpose : Alport syndrome is a hereditary nephrotic disease characterized by progressive nephrotic symptom, sensorineural hearing loss, ophthalmic abnormality, typical microscopic findings, and familial occurrence. In this study, we tried to find the risk factors related with its prognosis by taking a close observation on clinical symptoms of children with Alport syndrome reviewing retrospectively. Materials & methods : We chose children diagnosed as Alport syndrome in renal biopsy during 20 years(from 1980, Jan. until 1999, Dec.) who could receive follow up studies in tile department of pediatrics. They were divided into two groups by comparing renal function at the time of diagnosis and at current status. We compared several clinical aspects in them, and applied nonparametric test for statistical analysis. Results : The sex ratio(male:female) of 24 children was 3:1. The most common clinical symptom presented at their first visit was gross hematuria. Among those 24 children, 11 cases($46\%$) of progressing into chronic renal failure(Group II) were observed. Hypertension, proteinuria and edema were seen much frequently in group II. The level of serum protein, albumin, and creatinine clearance were decreased while BUN, creatinine were relatively increased. All the results were statistically significant. Conclusion Clinically significant risk factors related to prognosis in Alport syndrome were the presence of hypertension, edema, and proteinuria at the time of diagnosis. Also, the level of serum protein, albumin, BUN, creatinine, and glomerular filtration rate were proved to be important factors in predicting prognosis. We believe that studies on these possible risk factors would be of great help in treating and predicting prognosis of children suffering with Alport syndrome. (J Korean Soc Pediatr Nephrol 2001;5 : 164-75)

• Childhood Kidney Diseases
• /
• v.5 no.2
• /
• pp.125-135
• /
• 2001

Purpose : Efforts to predict long-term outcome of focal segmental glomerulosclerosis(FSCS) have been made but have yielded conflicting results. Reports are rare especially in Pediatric patients. In this study, we reviewed the predictable prognostic factors in patients of FSGS Method : Fifty children who diagnosed as biopsy-proven FSGS at department of pediatrics at Yonsei university were studied retrospectively. Based on medical records, response to treatment and pathologic slides, we compared normal renal function group and decreased renal function group, assessed the factors affecting renal survival and progression to renal failure. Results : The mean age at onset was 8 1/12 years, sex ratio was 2.3 : 1, and the mean duration of follow-up was 7 1/12 years. The overall renal survival rate was $34\%$ at 5 years, $8\%$ at 10 years Five-year survival rate was $74\%$ in normal renal function group and $27\%$ in decreased renal function group. Between the two groups, there were no significant differences in age at onset, sex ratio, amount of proteinuria, incidence of hematuria and hypertension, mesangial hypercellularity. Decreased renal function group showed higher serum creatinine level, poor response to treatment, higher percent of glomeruli with sclerosis, moderate to severe tubulointerstitial change and vascular change(P<0.05). The prognostic factors of renal survival rate were same as above and incidence of hypertension also affected renal survival( P<0.05). The progression rate to renal failure did not show statistically significant factor. Conclusion : We reviewed the factors affecting long-term outcome of FSGS. Serum creatinine level, steroid responsiveness, and the degree of glomerulosclerosis were significant prognostic factors. (J Korean Soc Pediatr Nephrol 2001 ;5 : 125-35)

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.101-112
• /
• 2018

This study was carried out to enhance the competitiveness of blackbox design for domestic and international companies, based on the explosive growth of the blackbox market due to development of blackbox design for vehicle accident prevention and post-treatment. In the past, the blackbox market has produced products indiscriminately to meet the ever-increasing demand of consumers. Therefore, we thought a new design method was necessary to effectively investigate the needs of rapidly changing consumers. In this study, we aimed to identify the best-selling blackbox to understand the design flow, and the optimum area for a blackbox, considering the uniqueness of associated vehicle. Based on discussion with blackbox design experts, we studied the direction of design and the problems with blackbox use, which were reflected in blackbox development. Through this research, two types of design - leading blackbox (A type) and mass production blackbox (B type) - were proposed for compatibility of the blackbox with the car. The leading type of blackbox was positioned so that it was wrapped with the room mirror hinge before the screw was fastened, in order to achieve an integrated design. Therefore, we designed an integrated form and resolved the placement problem of an adhesive blackbox. To blend, the mass production blackbox implemented material and surface processing in the same way with the car, and adopted the slide structure to automatically turn off the main body power when removing the SDcard, reflecting consumer needs. This study considers evolving consumer needs through a case study and collective intelligence and deals with implementation of the whole design process during mass production. In this study, we aimed to strengthen the competitiveness of the blackbox design based on design method and its realization.

• Publications of The Korean Astronomical Society
• /
• v.34 no.3
• /
• pp.31-40
• /
• 2019

We study the internal structure under the artificial mountain of Heumkyeonggak-nu, a Korean water-powered clock in the early Joseon dynasty. All the puppets on the artificial mountain are driven by the rotational force generated by the water wheel at their designated time. We design a model that work with three parts of the artificial mountain. At the upper part of the artificial mountain to the east, west, north and south, there are four puppets called the Four Mystical Animal Divinity and four ladies called the Jade Lady respectively. The former rotates a quarter every double hour and the latter rings the bell every hour. In the middle part of this mountain is the timekeeping platform with four puppets; the Timekeeping Official (Hour Jack), the Bell-, Drum-, and Gong-Warriors. The Hour Jack controls time with three warriors each hitting his own bell, drum, and gong, respectively. In the plain there are 12 Jade Lady puppets (the lower ladies) combined with 12 Oriental Animal Deity puppets. In his own time a lady doll pops out of the hole and her animal doll gets up. Two hours later, the animal deity lies down and his lady hides in the artificial plain. These puppets are regularly moved by the signal such as iron balls, bumps, levers, and so on. We can use balls and bumps to explain the concept of the Jujeon system. Iron balls were used to manipulate puppets of the timekeeping mechanism in Borugak-nu, another Korean water-powered clock in Joseon dynasty, which was developed earlier than Heumgyeonggak-nu. According to the North Korea's previous study (Choi, 1974), it is obvious that bumps were used in the internal structure of Heumgyeonggak-nu. In 1669, The armillary clock made by Song, I-young was also utilized bumps. Finally we presented mock-ups of three timekeeping systems.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.62-69
• /
• 2003

The aim of research is the evaluation of the $Cr^{6+}$ emission features of the liquid injection through emission experiments in varying conditions, based on a field-mixing ratio. The results showed that the content of $Cr^{6+}$ content in cement measured had an Ordinary Potland Cement (OPC) of 25.3 mg/kg, which constitute the largest portion among the other materials. Likewise, the emission experiment of homo-gel and sand-gel generally satisfied the standard of KSLT (Korea Standard Leaching Test) in waste of 1.5 mg/L, but in case of the standard of KSLT in soil the emission of OPC $Cr^{6+}$ of 4.85 mg/kg. These conditions is a little exceeded the criteria in the ‘Ga’ area in terms of Korea Soil Environmental Preservation Law. In addition, results generated by the mock-up injection facilities revealed that $Cr^{6+}$ emission increased as Water/Cement and injection pressure increased. At injection pressure higher than 4 kg/㎤, $Cr^{6+}$ emission exceeded the water preservation standard of 0.5 mg/L. Similarly, a pattern experiment of C $r^{6+}$ emission according to pH was conducted, in order to evaluate the $Cr^{6+}$ emission features of grout materials in leachate below pH 5 such as pH 4 acid rain or landfill. Results show that $Cr^{6+}$ emission dramatically increased in high acidic or basic state. It indicates that $Cr^{6+}$ emission will probably increase in an environment where grout materials are injected. On the other hand, concentration of leachate was determined in areas where grout materials are used. The results show that the concentration of emission in an ultra purity condition does not manifest intensity, and is affected in the OPC>MC>SC order. It means that the pollutants or $Cr^{6+}$ emission increases with decreasing concentration. As such, $Cr^{6+}$ emission will probably exceed the countermeasure criteria according to the types of gout materials. Similarly, high pressure or injection will cause increased $Cr^{6+}$ emission. Therefore, the selection of materials or mixing ratio should be considered in general as well as according to specific industries, based on the strength and pH of $Cr^{6+}$ emission.