• 대한두경부종양학회지
• /
• 제25권2호
• /
• pp.132-137
• /
• 2009

Purpose : For the past 10 years, the incidence of thyroid cancer has been rapidly increased in female population showing current incidence of 12,000 new thyroid cancer patients annually in Korea. Though differentiated thyroid cancer is known to show favorable prognosis and excellent long-term survival from slow growth and late distant metastasis, we re-evaluated prognostic factors of recurrence and mortality following surgical procedures based on our cases. Material and Methods : 954 Patients of DTC surgically treated at Department of Surgery, Inje University Busan Paik Hospital between 1980 and 2004 were reviewed in the aspects of the surgical procedures, clinical staging, risk factors, recurrence and their outcome through median follow-up period of 10.5 years. Results : Recurrence in remnant thyroid, cervical nodes, and distant metastasis were observed in 84 paients(8.8%), and 31 patients were confirmed to be died of locoregional recurrence of cancer and distant metasasis. Regarding the risk factors to recurrence, tumor size, extrathyroidal extension, nodal metastasis, and capsular invasion were significant predictors(p<0.05). Local recurrence and distant metastasis had no statistical signiicance according to age, sex, pathology, surgery, and lymphovascular invasion. Overall 10-year survival rate was 92.4%, but low, intermediate, and high-risk patient showed 100%, 94.4%, and 70.5% respectively. Conclusion : The significant factors influencing local recurrence and distant metastasis were tumor size, extrathyroidal exension, LN metastasis, capsular invasion. In order to improve survival rate of high-risk group, appropriate and aggressive management should be recommended.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1078-1088
• /
• 2012

Recently, the vibration and structure-borne noise induced by passing trains are of great concerns, and the floating slab track is highlighted as one of most efficient alternatives to reduce the railway vibration. However, due to the non-linearity and viscosity of rubber spring used in the floating slab track, its dynamic behavior is very complex. In this study, therefore, to simulate the dynamic behavior of floating slab track with a better accuracy, a nonlinear viscoelastic rubber spring model that can be incorporated in commercial finite element analysis codes has been proposed. This model is composed of a combination of elastic spring element, friction element and viscous element, and termed the "generalized friction viscoelastic model(GFVM)". Also, in this study, the method to determine the model parameters of GFVM based on Berg's 5-parameter model was presented. The results of the finite element analysis with this rubber spring model exhibit very good correlation with the test results of a laboratory mock-up test, and the feasibility of GFVM has been verified.

• 센서학회지
• /
• 제9권1호
• /
• pp.51-60
• /
• 2000

본 논문에서는 정상류형 혈액 펌프의 일종인 축류형 혈액 펌프를 이용하여 혈액 펌프 시스템을 설계하였다. 이 시스템은 혈액 펌프, 신호 획득부, 인터페이스부, 신호 처리부로 구성되어 있고, 혈압과 심박수를 이용하여 혈압과 혈류량을 적절히 제어함으로써 좌심실의 기능을 보조할 목적으로 연구되었다. 전동 펌프가 회전할 때 생체내의 순환조건에 알맞도록 혈액 펌프의 회전수, 혈액 펌프에 걸리는 부하와 압력 정보를 적용하여 실험식을 만들어 제어에 이용하였으며 설계 제작된 모의 순환장치로써 실험한 결과 모의 혈관 내에서 적절한 혈압과 혈류의 제어가 가능하였고, 혈구의 변화량 실험 결과는 임시의 목적으로 사용가능 함을 알 수 있었다.

• 한국방재학회 논문집
• /
• 제9권2호
• /
• pp.1-9
• /
• 2009

물-결합재비 0.4이하의 고성능 콘크리트 수축 변형을 파악하기 위해 전체 수축을 수분의 외부이동에 의한 건조수축과 수분의 내부소모에 의한 자기수축으로 분리한 후, 자기건조에 의한 상대습도 변화와 변형률의 관계를 묘사하기 위하여 계면역학적 접근법에 의한 습도-변형률 관계를 설정하였다. 이에 대한 검증을 위해 자기수축 시험체에서의 습도-수축 측정을 수행하였으며, 기존 연구 모델인 Tazawa, CEB-FIP 모델에 비하여 측정값과 가장 유사한 결과를 나타내어 본 연구에서의 자기수축모델은 자기건조에 따른 자기수축은 선형성을 나타내는 수분의 외부이동에 의한 수축과는 달리 지수적 관계를 갖는 특성과 초기재령에서의 급속한 자기수축 발현 특성을 적절히 묘사하고 있음을 알 수 있었다. 이 후 본 연구의 수분이동-수축 모델을 반영하여 온도, 수분이동, 변형률 해석의 다중물리 모델 해석과 모형시험체 측정을 수행한 결과 매우 유사한 값을 나타내어 본 연구를 통해 측정된 수분의 내부소모에 의한 습도와 수축변형률을 고려한 다중물리모델은 타당할 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.10-16
• /
• 2007

A rubber seal for wheel bearing which has been mainly applied to car wheel supporting device is required to have both high sealing performance and drag torque. Because of severe operational conditions like infiltration of mud or splashed water, the importance of rubber seal which is aimed for leakage prevention of grease and effective blocking of foreign substances has been increasing continuously. The sealing performance of this seal depends on several factors such as materials of seal, friction conditions of contact regions and geometry of seals and so on. We have focused on the effects of geometric characteristics such as the angle of main lip, interference between lip edge and inner metallic ring. In this study, the optimization of geometric variables was performed using the finite element analysis. For the sake of finite element analysis, uniaxial tensile tests were conducted and several constants for Mooney-Rivlin's equation were obtained. According to the results of this study, mock-up bearing was made. To verify this study, drag torque and mud spray test were preformed.

• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.125-134
• /
• 2006

The tightness of windows have devoted to the improvement of thermal insulation and energy saving in buildings. But it is known that this tightness causes some side effects such as low ventilation, low capacity to humidity and temperature control and these are not profitable for inhabitants. To act on these side effects, Korean traditional windows which are composed of Han-Ji(Koreand traditional paper) and Chang-Sal(Korean traditional wooden frame) have been studied to get a reasonable solutions for these problems. In this study, to compare the thermal and humidity control performance of current window(12 mm pair) and Korean traditional windows, frames which are made of existing window and Korean traditional windows are adapted to scale model house and then humidity and temperature of in and out of scale model house are measured and analysed. The results of this study are followings ; 1) When Korean traditional window charges 20cm(1/8 of total window area) from total window area, Han-Ji window has higher thermal insulation than that of existing window in daytime. There is the most big thermal difference when double faced with double-ply Han-Ji window is placed to mock-up house. In night-time, the temperature difference is very small so this means that Korean traditional window is good to cover direct sunlight in daytime and reduce the temperature of balcony. One faced with one-ply han-Ji window has the best humidity penetration performance among three type of Korean traditional windows. 2) When Korean window area enlarged to 40cm(1/4 of total window area), the function of 40cm width Han-Ji window is higher than that of 20cm's. This means that enlargement of Han-Ji window cover direct sunlight more and is more efficient in humidity penetration.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.79-86
• /
• 2018

Many countries have conducted extensive studies for biomass co-firing to enhance the durability of reactor on high-temperature corrosion. However, due to the complicated mechanisms of biomass co-firing, there have been limitations in accurately determining the current state of corrosion and predicting the potential risk of corrosion of power plant. In order to solve this issue, this study introduced Lab-scale corrosion system to analyze the corrosion characteristics of the A213 T91 material under the biomass co-firing conditions. The corrosion status of the samples was characterized using SEM/EDS analysis and mass loss measurement according to various biomass co-firing conditions such as corrosion temperature, $SO_2$ concentration, and corrosion time. As a result, the corrosion severity of A213 T91 material was gradually increased with the increase of $SO_2$ concentration in the reactor. When $SO_2$ concentration was changed from 0 ppm to 500 ppm, both corrosion severity and oxide layer thickness were proportionally increased by 15% and 130%, respectively. The minimum corrosion was observed when the corrosion temperature was $450^{\circ}C$. As the temperature was increased up to $650^{\circ}C$, the faster corrosion behavior of A213 T91 was observed. A213 T91 was observed to be more severely corroded by the effect of chlorine, resulting in faster corrosion rate and thicker oxide layer. Interestingly, corrosion resistance of A213 T91 tended to gradually decrease rather than increases as the oxide layer was formed. The results of this study is expected to provide necessary research data on boiler corrosion in biomass co-firing power plants.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.523-533
• /
• 2015

Three-dimensional flow phenomena in a wire-wrapped 37-pin fuel assembly mock-up of a Japanese loop-type sodium-cooled fast reactor, Monju, were investigated with a numerical analysis using a general-purpose commercial computational fluid dynamics code, CFX. Complicated and vortical flow phenomena in the wire-wrapped 37-pin fuel assembly were captured by a Reynolds-averaged Navier-Stokes flow simulation using a shear stress transport turbulence model. The main purpose of the current study is to understand the three-dimensional complex flow phenomena in a wire-wrapped fuel assembly to support the license issue for the core design. Computational fluid dynamics results show good agreement with friction factor correlation models. The secondary flow in the corner and edge subchannels is much stronger than that in an interior subchannel. The axial velocity averaged in the corner and edge subchannels is higher than that averaged in the interior subchannels. Three-dimensional multiscale vortex structures start to be formed by an interaction between secondary flows around each wire-wrapped pin. Behavior of the large-scale vortex structures in the corner and edge subchannels is closely related to the relative position between the hexagonal duct wall and the helically wrapped wire spacer. The small-scale vortex is axially developed in the interior subchannels. Furthermore, a driving force on each wire spacer surface is closely related to the relative position between the hexagonal duct wall and the wire spacer.

• 사상체질의학회지
• /
• 제24권3호
• /
• pp.34-41
• /
• 2012

Objectives In this study, we developed a mock-up of the system for Sasang Constitutional (SC) diagnosis. This system consists of 5 devices which are the face analyzer, the voice analyzer, the skin analyzer, the pulse analyzer, and the computer-based questionnaire. Our goal is to evaluate the repeatability of the system. Methods Each device is capable of classifying SC types. The classification probability of the integrated system for the SC types was obtained by summing the probability from each device. For evaluating the repeatability of the system, we collected data for 5 subjects, and repeated the measurement three times for each individual. The average and standard deviation were used for calculating the Coefficient of Variation. Results The results showed that the repeatability of the classification probability of the integrated system is about 8%, which implies the system is repeatable. Conclusions To increase usability of this system, it is desirable for the system to offer information on health condition of the user. The integrated constitutional diagnosis system will be upgraded to complement the convenience and to develop the diagnostic algorithm for the user's health condition.

• 한국압력기기공학회 논문집
• /
• 제6권2호
• /
• pp.20-27
• /
• 2010

In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.