• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.348-351
• /
• 2009

본 논문에서는 구조해석을 위한 PSC 박스 거더교의 객체 정보 모델에 관한 연구를 수행하였다. 대상 교량의 객체 정보 모델을 생성하기 위해서는 수많은 형상 및 치수에 관한 파라미터를 필요로 하게 된다. 따라서 본 연구에서는 이 교량의 설계 목적에 맞는 파라미터를 분류하였고, 파라미터들 사이의 계층구조(Structure)와 상관관계를 정의하였다. 또한 본 연구에서 적용된 인터페이스 프로그램은 3차원 객체 모델에서 출력된 파라미터를 변환하여 구조해석을 위한 입력값으로 변환시켜, 해석 결과값을 구조계산서에 출력시킴으로써 엔지니어가 설계 타당성과 모델변경 요구를 용이하게 할 수 있게 하였다. 그리고 대상 모델에 대한 설계변경은 구조물의 특징에 맞는 상관파라메트릭 방법을 적용하여 신속하게 할 수 있도록 유도하였다. 이 연구를 통해 건설구조물의 설계를 3D 모델로 하기위한 가능성을 확인하였다.

• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.225-232
• /
• 2003

The purpose of this study is to select the optimal and minimum transmittance for visual amenity in office buildings. This study progressed as follows. The first, we select 5 films with various transmittance based on the current film makers whose films being used on the windows of office building nowadays and the case study of construction. And then we choose 6 kinds of transmittance as evaluation object including plain glass. The second, we made a mock-up models having different transmittance on the southern windows with model of real scale office building. The third, we select 17 pairs of adjectives for the evaluation of visual comfort on interior or exterior conditions with transmittance factor. The fourth, subjective evaluation experiment was done using selected evaluation adjectives and the result was analyzed. The results are as follows : the minimum transmittance appropriate for the office building is 30%∼40% and the optimal transmittance range is 40%∼60%.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.06a
• /
• pp.93-105
• /
• 2000

This paper describes prototype Virtual Reality Ship Simulator (VRSS) that we have recently developed next-generation training equipment based on the virtual reality (VR) technology. The inherent defects of conventional ship simulators are enormous costs and difficult system upgrade due to the system construction, such as large mock-up bridge system, wide visual presentations, In this paper, to cope with those problems, we explored VR technology that can give realistic environments in a virtual world. Then we constructed prototype VRSS system, which is, consists of PC-based human sensors, and Databases set having 3D object models and coefficients of Head Related Transfer Functions (HRTFs). 3D-WEBMASTER authoring tool was used as Virtual Reality Modeling Language (VRML). Using the VRSS system, we constructed Port an Passage Simulator for the harbor of INCHON in Korea, and Ship and Sea State Simulator for an arbitrary given sea environmental states by user. Through many simulation tests, we testified the efficiency of developed prototype VRSS by subject assessment with five participants. Then, we present results on the simulation experiments and conclude with discussion of evaluation results.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.34-34
• /
• 2014

We investigate the constraints on the matter density ${\Omega}m$ and the cosmological constant ${\Omega}{\Lambda}$ using the gravitational lensed QSO (Quasi Stellar Object) systems from the Sloan Digital Sky Survey (SDSS) by analyzing the distribution of image separation. The main sample consists of 16 QSO lens systems with measured source and lens redshifts. We use a lensing probability that is simply defined by the gaussian distribution. We perform the curvature test and the constraints on the cosmological parameters as the statistical tests. The statistical tests have considered well-defined selection effects and adopt parameter of velocity dispersion function. We also applied the same analysis to Monte-Carlo generated mock gravitational lens samples to assess the accuracy and limit of our approach. As the results of these statistical tests, we find that only the excessively positively curved universe (${\Omega}m+{\Omega}{\Lambda}$ > 1) are rejected at 95% confidence level. However, if the informations of the galaxy as play a lens are measured accurately, we confirm that the gravitational lensing statistics would be the most powerful tool.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.389-399
• /
• 2014

Purpose: This study was aimed at developing a tractor-driving simulator for the safety training of agricultural tractor operators. Methods: The developed simulator consists of five principal components: mock operator control devices, a data acquisition and processing device, a motion platform, a visual system that displays a computer model of the tractor, a motion platform, and a virtual environment. The control devices of a real tractor cabin were successfully converted into mock operator control devices in which sensors were used for relevant measurements. A 3D computer model of the tractor was also implemented using 3ds Max, tractor dynamics, and the physics of Unity 3D. The visual system consisted of two graphic cards and four monitors for the simultaneous display of the four different sides of a 3D object to the operator. The motion platform was designed with two rotational degrees of freedom to reduce cost, and inverse kinematics was used to calculate the required motor positions and to rotate the platform. The generated virtual environment consisted of roads, traffic signals, buildings, rice paddies, and fields. Results: The effectiveness of the simulator was evaluated by a performance test survey administered to 128 agricultural machinery instructors, 116 of whom considered the simulator as having potential for improving safety training. Conclusions: From the study results, it is concluded that the developed simulator can be effectively used for the safety training of agricultural tractor operators.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.613-618
• /
• 2011

More than 7 million persons use Seoul Metropolitan Subways (SMS) everyday and the number has been in increasing trend. With the increasing trend of concerns on indoor air quality(IAQ), the management of IAQ has become an important issue, especially in case of subway operators, because most of subway lines are placed underground with poor ventilation condition. The ultimate object of study develop independent cleaning device that reduce efficient fine particle and $CO_2$. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. Two layered electrically pre-charged filters were used for removing particulate matters and gas absorbers are packed between two layer filters for removing gases pollutants such $CO_2$, VOCs and HCHO. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. SCAP prototype is producted as all in one method which decrease fine dust, $CO_2$ and noxious gas. and basic test carry out with quantity of wind, a gap of pressure, sampling efficiency.

• KIEAE Journal
• /
• v.8 no.6
• /
• pp.21-26
• /
• 2008

According to the tendency of energy efficiency and environment-friendly chracteristics, demend of High-efficiency lighting using LED(Light Emitting Diode)are being increased actively and applied in various fields. However, In order to adequate application of LED light sources, it is necessary to lighting environment and luminous characteristics of LED light sources. This Study aims to characterize the work-plane lighting environment by LED light sources comparing with fluorescent light sources which are widely used. For the sake of this study, a fluorescent light source and 5 LED light sources were introduced and luminance and correlated color temperature were measured to evaluate luminance contrast. The experimental model is Mock-up which is $4.9m{\times}7.2m$ with a height of 2.9m. The test room was set up partition and desks. Luminance and correlated color temperature were measured work-plane on the desk which was set up local lighting by the Radiant Imaging ProMetric 1400. The optical characteristics data of LED can give a lot of advantages to design LED lighting appliances. Hereafter, the object of research will be conducted to evaluate effects of LED light sources on working performance, survey of visual performance, preference and physiology of subjects.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.171-181
• /
• 2020

Recently, free-formed construction technology is becoming a new measure of representing technological superiority and sociocultural ingenuity. However, the CNC processing technology utilizing the existing wood and iron form has limitations in terms of the manufacturing time and material cost. Therefore, in this study, the method and process of manufacturing free-formed EPS form using S-LOM-based 3D printing technology were suggested. Furthermore, through the mock-up test, a comparative analysis of the manufacturing time and precision with CNC milling technology was conducted. The results show that S-LOM-based 3D printing technology has reduced manufacturing time about 57.4% compared to CNC milling technology during the free-formed EPS form manufacturing process. In addition, compared to the design drawings, the maximum error value was 20.5mm, proving the applicability of S-LOM-based 3D printing technology. The results of this study are expected to contribute to the improvement of S-LOM method and the activation of S-LOM method by verifying the applicability of S-LOM-based 3D printing technology.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.177-184
• /
• 2011

In this paper the nonlinear analysis that include time-dependent characteristics of materials and geometric nonlinearity of elements for the cable-stayed PSC bridges is presented. Analysis models for finite element method were developed based on the flexibility based fiber beam-column model originally proposed by Spacone et al.(1996). The developed analysis model implemented in general purpose object-oriented finite element analysis program named HFC(Cho 2009). The performance of proposed analysis models is evaluated by comparing with the former results of the design data. The deflection of time dependent analysis is larger than time ignored analysis on construction sequences, and the bridge is destructed at a smaller deflection than the time ignored analysis on failure behavior.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.87-95
• /
• 2013

In the research and development processes of new product, the design objects are frequently redesigned on the basis of experimental results. Most of the conventional CAD systems are based on the computer simulation to reduce the number of redesign. However, these types of CAD systems do not have the functions to infer the cause of trouble in experiments of mock-up and the redesign counterplan of new product. This paper proposes a methodology to establish the DESYR ver. 1(Design Expert SYstem for Research and development) system, which possesses the engineering model of design object in the model database, and refines the model on the basis of experimental results of the prototype. The blackboard inference model has been applied to infer the redesign counterplan. And the validity of DESYR ver. 1 system has been verified by developing the new type of magnetic bearing.