• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.155-163
• /
• 2000

This paper presents a path planning method of the sensor based intelligent vehicle using fuzzy logic controller for avoidance of moving obstacles in unknown environments. Generally it is too difficult and complicated to control intelligent vehicle properly by recognizing unknown terrain with sensors because the great amount of imprecise and ambiguous information has to be considered. In this respect a fuzzy logic can manage such the enormous information in a quite efficient manner. Furthermore it is necessary to use the relative velocity to consider the mobility of obstacles, In order to avoid moving obstacles we must deliberate not only vehicle's relative speed toward obstacles but also self-determined acceleration and steering for the satisfaction of avoidance efficiency. In this study all the primary factors mentioned before are used as the input elements of fuzzy controllers and output signals to control velocity and steering angle of the vehicle. The main purpose of this study is to develop fuzzy controllers for avoiding collision with moving obstacles when they approach the vehicle travelling with straight line and for returning to original trajectory. The ability are and effectiveness of the proposed algorithm are demonstrated by simulations and experiments.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.2
• /
• pp.124-133
• /
• 2021

Objective: In order to secure the right to walk for the weak, such as the disabled, this study aims to suggest ways to improve the pedestrian environment by identifying factors that cause obstacles to walking. Design: Data Analysis and Perception Survey. Methods: The questionnaire was conducted separately between users of personal mobility vehicle and non-users. A total of 207 effective questionnaires were collected, and the analysis analyzed the perception of personal mobility vehicle by conducting frequency analysis using SAS 9.4. The survey focused on basic information on respondents, walking conditions, understanding of personal mobility vehicle, awareness of pedestrian space passage and parking, and awareness of the possibility of securing pedestrian rights due to new regulations. Results: First, when moving a pedestrian path by personal mobility vehicle, it shall be limited to less than the walking speed of pedestrians. Second, the parking location of the personal mobility vehicle is located at the boundary of the pedestrian road and the lane. Third, pay a fair price to park in a pedestrian space. Conclusions: It is necessary to improve the system to strengthen the contents of education to take into account the safety of pedestrians in education on how to use personal mobility vehicle.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.62-72
• /
• 2010

As the applications for Mobile Ad-hoc NETworks (MANETs) have varied, performance analysis has become one of the main research areas. They commonly offer only simple radio propagation models that neglect obstacles of a propagation environment. The radio wave propagation model has a strong impact on the results of the simulation run. In this paper we present the new experimental results of the impacts of the various propagation models on MANETs' performance. Intensive simulations have been presented using the group mobility which models typical ad-hoc situations such as military movements or disaster recovery activities under the supervision of a group leader. Comparisons of conventional simple models with more complicated models, i.e., shadowing, Raleigh, and Ricean models, show that, in spite of the models' popularity, the free space and two-ray ground models are too optimistic in describing real ad-hoc group mobility situations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.329-336
• /
• 2008

Nowadays with advancement in technology and aging society, the number of disabled citizens is increasing. The disabled citizens always need a caretaker for daily life routines especially for mobility. In future, the need is considered to increase more. To reduce the burden from the disabled, various devices for healthcare are introduced using computer technology. The power wheelchair is an important and convenient mobility device. The demand of power wheelchair is increasing for assistance in mobility. In this paper we proposed a robotic wheelchair for mobility aid to reduce the burden from the disabled. The main issue in an autonomous wheelchair is the automatic detection and avoidance of obstacles and going to the pre-designated place. The proposed algorithm detects the obstacles and avoids them to drive the wheelchair to the desired place safely. By this way, the disabled will not always have to worry about paying deep attention to the surroundings and his path.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.193-200
• /
• 2012

Mobility is one of the most important issues for search and rescue robots. To increase mobility for small size robot we have focused on the mechanism and algorithm inspired from centipede. In spite of small size, using many legs and flexible long body, centipede can overcome high obstacles and move in rough terrains stably. This research focused on those points and imitated their legs and body that are good for obstacle negotiation. Based on similarity of a centipede's legs and tracks, serially connected tracks are used for climbing obstacles higher than the robot's height. And a centipede perceives environments using antennae on its head instead of eyes. Inspired from that, 3 IR sensors are attached on the front, top and bottom of the first module to imitate the antenna. Using the information gotten from the sensors, the robot decides next behavior automatically. In experiments, the robot can climb up to 45 cm height vertical wall and it is 600 % of the robot's height and 58 % of the robot's length.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.2
• /
• pp.153-159
• /
• 2016

In this paper, a mechanism of an omni-directional personal mobility which can drive diagonally is proposed. Mobility is a prerequisite involved in basic human life and activities. Personal mobility vehicle is a new mobility method which overcome the limits of automobiles. However, personal mobilities with four wheeled structure still have limitations. The proposed personal mobility vehicle can overcome the limitations of mobility because its rear wheels can be steered omni-directionally. In addition, the handicapped can drive it through a narrow road such as an alleyway or corridor and avoid obstacles on the traveling route. The proposed mechanism of personal mobility and the steering performance are tested by experiments, and the feasibility of diagonal driving is verified.

• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.147-159
• /
• 1983

In general, herbicides have been classified according to selectivity, mobility. time of application, methods of application, mode of action and chemical property and structure. However, there was no generally accepted classification system for practical use in the field. The primary processes affected by the majority of herbicides are the growth process through cell elongation and/or cell division, the photosynthetic process specifically the light reaction, the oxidative phosphorylation and the integrity of the membrane systems. The usual approach in the study of the mechanism by which herbicides kill or inhibit the growth of plants is to initially determine the morphological phototoxicity systems, The mechanism by which a herbicide kills a plant or suppresses its development is actually the resultant effect of primary and secondary(or side) effects. In most instances, the death of the plant is due to the secondary effects. To induce the desired response, a herbicide must be able to gain entry into the plants and once inside, to be transported within the plant to its site(s) of activity in concentrations great enough. Obstacles to the entry and movement of herbicides in plants are generally classified by leaf and soil obstacles, translocation obstacles and biochemical obstacles, and these obstacles are also strongly influenced by plant species and by environmental factors such as light, temperature, rainfall and relative humidity. And hence, in most instances, results obtained from laboratory or greenhous vary from those of field experiment. Author attempted to classify herbicides from the field experiment using the two-dimensional ordination analysis to obtain practical information for selecting effective herbicides or to choose effective herbicide combinations for increasing herbicidal efficacy or reducing the chemical cost. Based on this two-dimensional diagram, desired herbicides or combinations were selected and further investigated for the interaction effects whether these combinations are synergistic, additive or antagonistic. From the results, it was concluded that these new approach could possibly be give more comprehensive informations about effective use of herbicide than any other systems.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.552-557
• /
• 2009

In this paper, we propose hybrid navigation system, for obstacle detection and avoidance in Intelligent wheelchairs (IWs). To robustly detect obstacles and avoid them on various environments, hybrid navigation system combines both range-sensor and camera information. For this, 10 range-sensors (2 ultrasonic and 8 infra-red sensors) and CCD camera are used. Through processing the informations obtained from those sensors, our system can detect obstacles with various sizes and shapes, and then avoid them. To assess the effectiveness of the proposed hybrid navigation system, it was tested on complex environments including various obstacles, then the results showed the potential of our system as mobility aids for disabled people.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.639-644
• /
• 2003

An unstructured environment requires a robot to possess outstanding mobility and advanced control algorithms since there exist complicated configurations such as obstacle, uneven surface, etc. Especially, when a quadruped robot walks in these environments, obstacles in the walking route will obstruct the walking or may give rise to a serious trouble. In this paper, we introduce a strategy for the stable walking in unstructured environment. The proposed strategy consists of two control algorithms. One is a collision{free algorithm to avoid obstacles and the other is an algorithm to overcome any obstacle. These are based on the obstacle detection method and a shape reconstruction algorithm, Which algorithms are described in detail. In addition, the validity of these algorithms have been demonstrated through experiments using a quadruped walking robot called "MRWALLSPECT III(Multifunctional Robot for Wall inSPECTion version 3 )".

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.67-75
• /
• 1998

This paper presents a new robot motion planning method for moving obstacle avoidance. To consider the mobility of a moving obstacle, we define virtual distance function(VDF) between the robot and the obstacle. At each sampling time, we use the VDF to construct an artificial potential, considering the motion of obstacles. The robot moves according to the repulsive and attractive force vector induced by the artificial potential function. The proposed algorithm can be driven the robot to avoid moving obstacles in real time. Some simulation studies show the effectiveness of the proposed method.