• 한국컴퓨터정보학회논문지
• /
• 제10권6호
• /
• pp.345-354
• /
• 2005

이동매니퓰레이터는 -이동로봇과 작업로봇이 직렬로 결합된 형태 - 작업 공간 밖에 존재하는 작업에 대하여 높은 성능으로 작업을 수행할 수 있으므로 고정 베이스 구조의 매니이퓰레이터에 비하여 다양한 작업 환경에서 유용하다. 임의의 위치에 있는 물체를 인식하기 위하여 이동매니퓰레이터에 부착된 2자유도의 능동카메라에 의해 입력되는 영상과 능동카메라의 기구학적 관계에 기초를 두는 직각좌표계를 이용하여 물체의 위치와 이동로봇의 위치를 구하는 방법을 제시한다. 동차행렬을 이용하여 이미지정보와 물체의 위치를 해석하므로 이동매니퓰레이터의 최적경로를 생성한다. 최종적으로, 물체의 인식을 통하여 작업로봇을 제어할 수 있는 조인트변수의 값을 계산한다. 제안된 방법은 제작된 이동매니퓰레이터로 시뮬레이션과 실험을 통하여 확인되어지고 논의된다.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.92-100
• /
• 2004

A service robot is expected to be useful in indoor environment such as a hotel, a hospital and so on. However, many service robots are driven by wheels so that they cannot climb stairs to move to other floors. If the robot cannot use elevators. In this paper, the mobile manipulator system was developed, which can operate numeral buttons on the operating panel in the elevator. To perform this task, the robot is composed of an image recognition module, an ultrasonic sensor module and a manipulator. The robot can recognize numeral buttons and an end-effector in manipulator by the vision system. The Learning vector quantization (LVQ) algorithm is used to recognize the number on the button. The barcode mark on the end-effector is used to recognize the end-effector. The manipulator can push numeral buttons using informations captured by the vision system. The proposed method is evaluated by experiments.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권2호
• /
• pp.74-80
• /
• 2000

In this paper, we present a control method of mobile power assist systems. Most of mobile power assist systems have a heavy base for preventing easy tumbling, so continual movement of the base during operations causes high energy consumption and gives the high risk of human injury. Furthermore, the slow dynamics of the base limits the frequency bandwidth of the whole system. Thus we propose a cooperation control method of the mobile base and manipulator, which removes the unnecessary movements of the base. In our scheme, the mobile base does not move until the center of gravity(C.G) of the system goes outside a safety region. When C.G. reaches the boundary of the safety region, the base starts moving to recover the manipulator's initial configuration. By varying the parameters of a human impedance controller, the operator is warned by a force feedback that C.G. is on the marginal safety region. Our scheme is implemented by assigning a nonlinear mass-damper-spring impedance to the tip of the manipulator. Our scheme is implemented by a nonlinear mass-spring impedance to the tip of the manipulator. The experimental results show the efficacy of the proposed control method.

• 전자공학회논문지SC
• /
• 제48권1호
• /
• pp.39-46
• /
• 2011

본 논문은 실내에서 사용할 이동로봇의 구현과 제어에 대한 것이다. 로봇은 두 팔을 가지고 이동할 수 있는 베이스로 구성된다. 로봇은 디자인에 있어 및 가지 특정을 가진다. 첫 번째, 로봇의 허리는 높낮이 조절이 가능하다. 두 번째로 로봇은 접촉인 이동로봇 모드에서 2 점 접촉인 밸런싱 모드로 전환이 가능하다. 마지막으로 로봇은 상제와 하체의 분리 기능을 갖는다. 이동 베이스 부분은 청소작업에 사용이 가능하다.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.75-80
• /
• 2015

Typically, robot system configured by articulated robot manipulator with 1 DOF transfer unit is being applied in automotive manufacturing automation process. Especially, 1 DOF transfer unit is necessary to extend workspace of robot manipulator. In this configuration, because transfer unit works only one direction, robot manipulator only works in one side in case of car body painting or sealing automation process. it is necessary three robot manipulator system at least. In this paper, in order to robot manipulator works effectively in car body sealing automation application, we are suggested omni-directional manipulator system and conducted studying on redundancy resolution method to solve manipulability-optimal problem.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.190.1-190.1
• /
• 2005

• 제어로봇시스템학회논문지
• /
• 제19권4호
• /
• pp.315-321
• /
• 2013

This paper presents the position-based force control application of a mobile manipulator. The mobile manipulator consists of two six DOF manipulators and a mobile robot. Kinematics of the robot is analyzed and simulated to validate the analysis. A position-based force control technique is applied to the robot by adding an outer loop to interact with the environment. Experimental studies of force control applications of robot arm and interaction with a human operator are conducted. Experimental results show that the robot arm is well regulated to follow the desired force.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.301-306
• /
• 2021

In this paper, we propose a modified back-stepping control method in view of the dynamic model of mobile manipulator has the nonholonomic constraints, these constraints should be considered to design a tracking controller for the mobile manipulator. The conventional back-stepping controller includes the dynamics and kinematics of the mobile robot systems. and the modified adaptive back0stepping method is applied to constructing the controller. The proposed controller can realize the tracking trajectory of the reference path. The efficiency and robustness of this control method is demonstrated by the simulation.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.359-364
• /
• 2022

This study presents a nonlinear model predictive control (NMPC)-based obstacle avoidance and whole-body motion planning method for the mobile manipulators. For the whole-body motion control, the mobile manipulator with an omnidirectional mobile base was modeled as a nine degrees-of-freedom (DoFs) serial open chain with the PPR (base) plus 6R (arm) joints, and a swept sphere volume (SSV) was applied to define a convex hull for collision avoidance. The proposed receding horizon control scheme can generate a trajectory to track the end-effector pose while avoiding the self-collision and obstacle in the task space. The proposed method could be calculated using an interior-point (IP) method solver with 100[ms] sampling time and ten samples of horizon size, and the validation of the method was conducted in the environment of Pybullet simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.100.1-100
• /
• 2002

In this paper, we present autonomous mobile robot system, which has an image recognition module and perform tasks by itself with manipulator. Autonomous mobile robot can push each individual button on an elevator panel from a person's command. After the robot receives its command, it analyzes the image information of the elevator button that is acquired by CCD camera in an indoor environment with an elevator. In order to recognize the numbers on the button, the robot separates the number area in button and recognizes the segment through a neural network algorithm. We use the bar code form on the manipulator to find the position of the end of manipulator. The validity of the proposed method i...