• Journal of Internet Computing and Services
• /
• v.18 no.3
• /
• pp.11-17
• /
• 2017

To the elderly, sudden falls are one of the most frightening accidents. If an accident occurs, a prompt action has to be taken to deal with the situation. Recently, there have been a number of attempts to detect sudden falls using acceleration sensors embedded in the mobile devices, such as smart phones and wrist-bands. However, using the sensor readings only, the detection rate of the falls is around 65%. Ordinary daily activities such as running or jumping could not be well distinguished from the falls. In this paper, we describe our attempts on improving the fall-detection rate. We implemented a wrist-band fall detection module, using a three-axis acceleration sensor. With the pattern matching on the fall signal-strength frequency spectrum, in addition to the conventional signal strength measurement, we could improve the detection rate by 9% point. Furthermore, by applying two wrist-bands in the experiment, we could further improve the detection rate to 82%.

• The Journal of Korean Society for School & Community Health Education
• /
• v.19 no.2
• /
• pp.1-10
• /
• 2018

Objectives: The purpose of this study is to expand of workplace by analyzing the duty and workplace of health education specialist and by presenting professional duty for health education specialist. Methods: 22 papers related to health education experts were finally selected from 1993 to 2017(25 years). The selected literature analyzed the title, researchers, the publishing agency, the publication year, the main contents, and duty and workplace of the health education specialist. Results: The studies on health education specialists comprised 5 cases (22.7%) between 1993 and 1999, 3 cases (13.6%) between 2000 and 2009, 14 cases (63.6%) between 2010 and 2017. Health education specialists core duty were diagnosing health education needs, planning health education programs, developing health education methods and materials, performing and managing health education programs, evaluating and conducting research on health education programs, and health communication. The workplace were 11 for medical institutions (55.0%), 9 for healthcare organizations (45.0%) and 8 for schools (40.0%). Conclusions: In addition to the basic core duty, professional and differentiated duty capabilities such as managing the target, generating health information, encouraging involvement of the target, and mobile health care should be developed.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.8
• /
• pp.47-56
• /
• 2019

The purpose of this study is to explore the possibility of using crowdsourcing as a means to expand the participation of citizens in the process of smart urban regeneration New Deal policy. Using mobile devices, they built a crowdsourcing prototype system that enables residents to provide location-based ideas and opinions about the urban regeneration New Deal policy and share and manage the collected data. The system was applied to the actual urban regeneration New Deal project site to draw implications. The main research results are as follows. First, crowdsourcing is a means of strengthening expertise by utilizing collective intelligence dispersed among local residents. Through the online platform developed in this study, various ideas and opinions of the community can be collected. Second, the procedural legitimacy and transparency of the rehabilitation project can be secured by expanding the participation opportunities of the residents. Third, the efficiency of project promotion can be improved through participation of residents using online platform.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.246-253
• /
• 2022

Flabby tissue is not rare for denture wearers. Mucostatic impression technique is necessary due to compromised retention and stability of denture resulting from distortion of mobile flabby tissue. In this report, individual tray was fabricated by model-scanning and 3D printing treatment denture. And then, mucostatic impression for flabby tissue was obtained by using individual tray modified with window technique. Definitive denture was fabricated based on information of treatment denture including incisal pontic arrangement, jaw relationship and occlusion.

• Therapeutic Science for Rehabilitation
• /
• v.9 no.3
• /
• pp.53-61
• /
• 2020

Objective : The purpose of this study is to evaluate the reaction time and divided attention related to driving in elderly subjects using the driving ability assessment tool. By analyzing differences in average score according to age group, we also aim to, provide data for identifying the risk of driving in elderly people. Methods : A total of 70 elderly subjects, who participated in a driving evaluation program for people over 65 years of aged and who live in W city, Gangwon-do from August to December 2019, were included in the study. After the driving questionnaire was completed, the mobile driving assessment tool was explained, and then the patients carried out the reaction time and the divided attention task. Collected data were analyzed using the statistical program SPSS 25.0, and the significance level was set to 0.1. Results : The reaction time of the younger-old was 0.717 s, while that of the older-old was 0.843 s, this difference was statistically significant (p=.084). The response time for the task of divided attention was 0.669 s in the younger-old and 0.695 s for the older-old. In this case, there was no statistically significant difference between the two groups (p=.901). Conclusion : Using the mobile driving ability assessment tool, it was possible to evaluate the reaction rate and divided attention of elderly while driving.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.491-501
• /
• 2021

Purpose: This study is designed to provide care workers with basic data on the development of job training programs for enhancing professionalism of senior care services by identifying and analyzing job recognition and education requirements according to the type of work place. Methods: Data were collected from April to July 2019 from 177 care workers working at the Elderly Care Facilities, Elderly Housing Welfare Facilities and Rehabilitation Facilities in the B Metropolitan City. It was analyzed using the SPSS Win 21.0 Statistical Program. Results: The results of job recognition of care worker according to the type of work place shows as follows. As for health care welfare facilities for senior citizens and residential welfare facilities for the elderly was the highest level for physical change and mobile care protection belonging to basic care protection technologies. For the rehabilitation and welfare facility, human rights and prevention of abuse among senior citizens which is belonging to occupational ethics and attitudes of care workers showed the highest. Conclusion: It is required for differentiated job training to enhance capacity for care workers according to the type of work place, and it is needed to developed systematic and specific customized hands-on training to perform, not for simple knowledge.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.346-351
• /
• 2014

Suction dentures enhance retention and support by forming negative pressure temporarily at the internal surface of denture base at times of swallowing and chewing because the areas surrounding the denture flanges are sealed by mobile mucosa. In this case, an 81-year-old male visited for new dentures. Considering the high expectations for retention and masticatory efficiency of dentures, fabricating complete dentures with suction dentures was planned. Preliminary impression was taken without applying pressure on retromolar pad area and diagnostic cast was fabricated. Afterwards, individual tray was made and final impression was taken, at the same time, gothic arch tracing was done to acquire centric relation and vertical dimension. Then, anatomic teeth were placed on maxilla and non-anatomic teeth were placed on mandible forming lingualized occlusion. Consequently, restoring a complete edentulous patient with complete dentures using mandibular suction denture resulted in recovering satisfying retention and function.

• Journal of Biomedical Engineering Research
• /
• v.41 no.2
• /
• pp.84-93
• /
• 2020

Despite of a lot of studies about proprioception tests, there are little study results to investigate the relationship between the functional movement and proprioception level. In this study, we tried to perform quantitative analysis for the effect of ankle joint proprioception level on the one leg standing postural control ability. Nine healthy people volunteered for this study. Force and position aspects of proprioception were evaluated using the electromyography system (EMG) and mobile clinometer application, respectively. The center of pressure (COP) trajectories, measured by a pressure mat sensor, were used for quantitative analysis of balance for each subject. We computed indices and errors of force and position aspects of proprioception from the EMG and ankle angle. Mean velocity of total and anterior-posterior direction (Vm and Vm_ap), root mean squared distance in anterior-posterior direction (RDap), travel length (L), and area (A) of COP trajectories were also calculated as indices of postural control ability of subjects. Two aspects of proprioception showed the low correlation from each other as previous studies. However, the EMG error of gastrocnemius lateral activation showed a high correlation coefficient with COP variables such as Vm (ρ=0.817, p=0.007), Vm_ap (ρ=0.883, p=0.002), RDap (ρ=0.854, p=0.003), L (ρ=0.817, 0.007) and A (ρ=0.700, p=0.036). Within our knowledge, this is almost the first study that investigated the relationship between proprioception level and functional movement. These study results could support that the ankle joint proprioception facilitation exercise would have positive effects on functional balance rehabilitation interventions.

• The Korean Journal of Health Service Management
• /
• v.10 no.3
• /
• pp.223-234
• /
• 2016

Objectives : The purpose of this study was to investigate accident cases involving electronic assistive devices, to determine how these accidents can be avoided and to devise preventative instructions for the handicapped who use these devices. Methods : This study was carried out from July 20 to October 3, 2015. A consent-based survey was conducted via mail and mobile phones targeting 700 electronic assistive device users, of which questionnaires from 290 users were collected and used in the analysis. Results : Accidents involving electronic assistive devices were investigated, especially the causes of the accidents and accident prevention education, as well as the status of the electronic assistive devices. The most common accident types were collision and falling, and it was found that the victims of the accidents usually suffered severe injury to their lower limbs. Most users used electronic assistive devices every day but rarely wore a safety belt because of discomfort. There were more incidents of collision and falling for older aged handicapped users, and the injury rate to the lower limbs was highest in handicapped elderly aged 50 years or older. Conclusions : In order to prevent accidents with electronic assistive devices in the future, a or management organizations must prepare specific safety guidelines and manage these accidents.

• Journal of Biomedical Engineering Research
• /
• v.39 no.5
• /
• pp.188-207
• /
• 2018

Recently, three-dimensional (3D) printing of biological tissues and organ has become an attractive interdisciplinary research topic that combines a broad range of fields including engineering, biomaterials science, cell biology, physics, and medicine. The 3D bioprinting can be used to produce complex tissue engineering scaffolds based on computer designs obtained from patient-specific anatomical data. It is a powerful tool for building structures by printing cells together with matrix materials and biochemical factors in spatially predefined positions within confined 3D structures. In the field of the 3D bioprinting, three major categories of the 3D bioprinting include the stereolithography-based, inkjet-based, and dispensing-based bioprinting. Some of them have made significant process. Each technique has its own advantages and limitations. Compared with non-biological printing, the 3D bioprinting should consider additional complexities: biocompatibility, degradability of printing materials, cell types, cell growth, cell viability, and cell proliferation factors. Numerous 3D bioprinting technologies have been proposed, and some of them have been making great progress in printing several tissues including multilayered skin, cartilaginous structures, bone, vasculature even heart and liver. This review summarizes basic principles and key aspects of some frequently utilized printing technologies, and introduces current challenges, and prospects in the 3D bioprinting.