• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.51-58
• /
• 2004

Mobile Mapping System is an effective wav to obtain position and image using vehicle equipped with GPS(Global Positioning System), IMU(Inertial Measurement Unit), and CCD camera. It have been used various fields of load facility management, map upgrade and etc. It is difficult to upgrade Mobile Mopping System which is developed from abroad and add other sensors because we don't know the way to integrate and synchronize multi-sensors. In this paper, we present the effective way of the integration and synchronization method for multi sensors we designed and manufactured Synchronization equipment by considering sensors of laser, odometer and etc.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.53-57
• /
• 2013

The quality of service for the voice and data communication is one of the most important elements in the mobile cellular networks. This quality has the time varying characteristics depending on the wireless network environments. In order to guarantee the quality of service at the predefined level, the mobile service provider needs to collect all the information about the level of quality served by the local base stations. In the conventional method the information on the service quality is measured and collected by the moving vehicle adopting the global positioning device. However this method requires relatively high cost and does not cover all the service areas. In this paper a new method is proposed utilizing a measurement node with local area communication transceiver and the mobile user equipment. In the proposed method the node communicates with the user equipment periodically to monitor the information on the service quality. The resulting information is reported to the measurement server in the mobile network. This method could be applied to either the circuit or the packet based networks. It also has an advantage in terms of the cost efficiency compared to the conventional method considering the required the equipment and the human resources.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.153-159
• /
• 2012

CFC-12 used in mobile air conditioning(MAC) system has been replaced by R-134a, a type of HFC refrigerant, from 1991 to 1994. R-134a has since been widely used as a refrigerant of a mobile air conditioner. However, it is one of the six main green house gases listed in Kyoto Protocol, which makes it imperative to regulate its emission and develop alternative refrigerants. In this study, the concentration of leaked R-134a was measured using VT(Variable Temperature) shed and Running loss test shed to analyze the level of air conditioner refrigerant leaked in a vehicle. According to the analysis of the concentration of R-134a leaked from a vehicle parked, annual leakage amount of R-134a was in the range of 6.46~13.28 g/yr. The figure was similar with the leakage from the mobile air conditioning system currently used. In a study using the same vehicle model, a vehicle equipped with dual evaporation system had a higher leakage rate of refrigerant than a vehicle with a single evaporation system. It appears that the added fittings and joints of the dual evaporator system led to higher leakage rate. Besides, the analysis of the change in R-134a concentration under various car speed found that more refrigerant leaked under high speed(100km/hr) and but the volume of the wind did not affect to the variation of refrigerant leakage.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2011

This paper provides the performance measurement and analysis of Wireless LAN IEEE 802.11 in a mobile environment. The performances of IEEE802.11b/g and IEEE802.11p designed for Vehicle-to-Vehicle(V2V) communication are measured and analyzed. Diameter of communication and link access time are compared under variation of speed of the vehicle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.737-744
• /
• 2012

A mobile emission laboratory (MEL) was designed to measure the amount of traffic pollutants, with high temporal and spatial resolution under real conditions. Equipment for the gas-phase measurements of CO, NOx, $CO_2$, and THC and for the measurement of the number, concentration, and size distribution of fine and ultra-fine particles by an FMPS and CPC was placed in a minivan. The exhausts of different types of vehicles can be sampled by an MEL. This paper describes the technical details of the MEL and presents data from the experiment in which a car chases passenger vehicles fuelled by diesel and gasoline. The particle number concentration in the exhaust of the diesel vehicle was higher than that of the gasoline vehicle. However, the diesel vehicle with a DPF emitted fewer particles than the vehicle equipped with a gasoline direct injection engine, with particle diameters over 50 nm.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.112-119
• /
• 2007

In order to predict vibration trends occurred during vehicle drive, acceleration data was processed by using data processing algorithm with moving average and Hilbert transform. Specific mode constants of acceleration were obtained under various disturbance. Vehicle velocity, road condition, property of pointing structure were considered as factors which make change of vibration trend in vehicle dynamics. Results of signal processing were compared and analysed. Advanced performance of the timing selection algorithm from this study was verified by using simple equipment comparing with the deflection measurement laser system(Muzzle Reference System).

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.82-89
• /
• 2006

It appears that it is possible for us to make a wireless communication of even home-network system within car by integrating with the Ubiquitous such as mobile phone, wireless Internet, GPS and DMB in the future. If the present wireless surroundings within the car are connected with very high-speed wireless network as measurement system for wireless communication surroundings within this car in the future, it will develop the complicated communication conditions such as safe checkup, communication between systems within car, and wireless communication for user entertainment unlike universal communication conditions. Accordingly, there is the necessity of the device that can measure the interference of electric wave, communication speed and communication quality by a kind of each car. This paper aims at making the real measurement device to raise the reliability of each Application for inquiring into the interference about each other in the frequency band used under Telematics surroundings.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.90-101
• /
• 2009

An objective of this study is to suggest a procedure to evaluate vehicle emissions regardless of the driving pattern. Field experiments using portable emission measurement system were conducted under the real world driving cycle. Standardized average for NOx, $CO_2$ emission and fuel consumption rates were calculated while the vehicle specific power distribution within each vehicle speed bin was taken into consideration. Composite emission factor and fuel economy, which were obtained based on the standardized average results and traffic statistics, showed good similarity to those acquired through the conventional chassis dynamometer tests qualitatively as well as quantitatively. Considering that a conventional method obviously has a limitation to reflect various characteristics of the real world, the new approach suggested in this study can be used as an alternative procedure to collect more specific data to establish the mobile emission factors.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.194-203
• /
• 2021

Background: Surface soil radiation monitoring around nuclear facilities is important to classify and characterize the contaminated areas. A scanning and direct measurement technique can survey the sites rapidly before starting sampling analysis. Materials and Methods: Regarding this, we test and suggest a measurement technique for gross alpha/beta and ⁹⁰Sr activities in surface soil based on a mobile ZnS(Ag)/PVT (polyvinyltoluene) array and a handheld PVT rod, respectively. To detect ⁹⁰Sr selectively in soil mixed with naturally occurring radioactive materials, chosen energy channel counts from the multichannel analyzers were used instead of whole channel counts. Soil samples contaminated with exempt liquid ⁹⁰Sr with 1 Bq·g^-1, 3 Bq·g^-1, and 10 Bq·g^-1 were prepared and hardened by flocculation. Results and Discussion: The mobile ZnS(Ag)/PVT array could discriminate gross alpha, gross beta, and gamma radiation by the different pulse-shaped signal features of each sensor material. If the array is deployed on a vehicle, the scan minimum detectable concentration (MDC) range will be about 0.11-0.17 Bq·g^-1 at 18 km·h^-1 speed, highly sensitive to actual sites. The handheld PVT rod with 12 mm (Φ) × 20 mm (H) size can directly measure ⁹⁰Sr selectively if channels on which energies are from 1,470 and 2,279 keV are gated, minimizing crossdetection of other radionuclides. These methods were verified by measuring soil samples fabricated with homogeneous ⁹⁰Sr concentrations, showing static MDC of 2.16 Bq·g^-1 at a measurement time of 300 seconds. Conclusion: Based on the results, comprehensive procedures using these detectors are suggested to optimize soil sites survey.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.277-286
• /
• 2019

The construction industry is known to be one of the representative industries that generate fine dust. Therefore, reducing the amount of fine dust generated in construction sites is very important for the overall fine dust management. Based on this, this study proposed the fine dust measurement and removal technology combined with advanced technologies such as autonomous mobile vehicle IoT and DFS. The qualitative, quantitative and risk elimination effects that can be expected when applying the proposed technique are analyzed. The proposed technique will be validated through system development and field application and evaluated specific economics through cost analysis.