• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• Cartoon and Animation Studies
• /
• s.42
• /
• pp.151-175
• /
• 2016

The game industry has evolved from mobile games to PC online games after the smart-phone industry was opened up. In this environment, the game industry has rather been negatively developing its commercials means than the sufficient fundamental entertainment to the users. Especially, many games were released with better graphic qualities yet poor originality, continuing to be popular without enhancing the market itself. Moreover, the user's recognition level has improved. The users share their online gaming experience easily with the development of network environment. They receive the feedbacks on the quality of the game through the online channels and media by sharing them together. The high margin of the game industry will lead to the negative feedbacks of the users, effecting them to critique the content although the market looks good for now. The game industry's evolution has to be reviewed in the perspective of users, to look back at the successful cases of the past before the mobile era by analyzing and indicating the quality of the games and content's direction. This research is focused on the success factors of from the user's point of view, which has been widely claimed as a popular game franchise publicly before the mobile games had risen. WOW has been the most successful MMORPG game with its user record of 1.2 million till now. For these reasons, this study analyzes 's success factors from the user's point of view by configuring five expert groups, sequentially applying expert group survey, interview, Jobs-to-be-done and Fishbein Model as UX methodologies based on the business model to see through its long term rein in the industry. Consequently, The success factors from the user side of MMORPG provides an opportunity for the users to interact deeply with the game by (1) using well designed 'world view' over 10 years, (2) providing 'national policy' that is based on the locations of the users' culture and language, (3) providing 'expansions' with changes in time to give the digging elements to the users.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.939-951
• /
• 2022

The most important factor in designing autonomous driving systems is to recognize the exact location of the vehicle within the surrounding environment. To date, various sensors and navigation systems have been used for autonomous driving systems; however, all have limitations. Therefore, the need for high-definition (HD) maps that provide high-precision infrastructure information for safe and convenient autonomous driving is increasing. HD maps are drawn using three-dimensional point cloud data acquired through a mobile mapping system (MMS). However, this process requires manual work due to the large numbers of points and drawing layers, increasing the cost and effort associated with HD mapping. The objective of this study was to improve the efficiency of HD mapping by segmenting semantic information in an MMS point cloud into six classes: roads, curbs, sidewalks, medians, lanes, and other elements. Segmentation was performed using various machine learning techniques including random forest (RF), support vector machine (SVM), k-nearest neighbor (KNN), and gradient-boosting machine (GBM), and 11 variables including geometry, color, intensity, and other road design features. MMS point cloud data for a 130-m section of a five-lane road near Minam Station in Busan, were used to evaluate the segmentation models; the average F1 scores of the models were 95.43% for RF, 92.1% for SVM, 91.05% for GBM, and 82.63% for KNN. The RF model showed the best segmentation performance, with F1 scores of 99.3%, 95.5%, 94.5%, 93.5%, and 90.1% for roads, sidewalks, curbs, medians, and lanes, respectively. The variable importance results of the RF model showed high mean decrease accuracy and mean decrease gini for XY dist. and Z dist. variables related to road design, respectively. Thus, variables related to road design contributed significantly to the segmentation of semantic information. The results of this study demonstrate the applicability of segmentation of MMS point cloud data based on machine learning, and will help to reduce the cost and effort associated with HD mapping.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.344-350
• /
• 2009

This paper proposes a hybrid antenna with novel beam steering scheme. The antenna have a cassegrain structure composed of two reflectors. The main reflector is designed for high gain performance using parabola curvature, and the sub-reflector is plate and can be rotated by ${\pm}3^{\circ}$. Thus proposed antenna can steer a antenna beam using the inclination of sub-reflector. A feed array composed of 20 elements is adapted as a feeder for electrical beam steering, and the antenna can be possible to steer the beam by the feed array with sub-reflector. Proposed antenna was fabricated to be operated in Ka-band(30.085$\sim$30.885 GHz) for TX and K-band(20.355$\sim$21.155 GHz), which are the operation frequencies of the Korean satellite, Mugunhwa, to provide satellite multi-media service to vehicles. By the performance test, it can be known that the antenna has minimum gain of 47 dBi for TX and 44.4 dBi for TX and can steer the beam by ${\pm}2^{\circ}$ with sub-reflector.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.169-181
• /
• 2016

This work presents a new method for enhancing the performance of a dual band Planer Inverted-F Antenna (PIFA) and its lumped equivalent circuit formulation. The performance of a PIFA in terms of return loss, bandwidth, gain, and efficiency is improved with the addition of the proposed open stub in the radiating element of the PIFA without disturbing the operating resonance frequencies of the antenna. In specific cases, various simulated and fabricated PIFA models illustrate that the return loss, bandwidth, gain, and efficiency values of antennas with longer optimum open stub lengths can be enhanced up to 4.6 dB, 17%, 1.8 dBi, and 12.4% respectively, when compared with models that do not have open stubs. The proposed open stub is small and does not interfere with the surrounding active modules; therefore, this method is extremely attractive from a practical implementation point of view. The second presented work is a simple procedure for the development of a lumped equivalent circuit model of a dual band PIFA using the rational approximation of its frequency domain response. In this method, the PIFA's measured frequency response is approximated to a rational function using a vector fitting technique and then electrical circuit parameters are extracted from it. The measured results show good agreement with the electrical circuit results. A correlation study between circuit elements and physical open stub lengths in various antenna models is also discussed in detail; this information could be useful for the enhancement of the performance of a PIFA as well as for its systematic design. The computed radiated power obtained using the electrical model is in agreement with the radiated power results obtained through the full wave electromagnetic simulations of the antenna models. The presented approach offers the advantage of saving computation time for full wave EM simulations. In addition, the electrical circuit depicting almost perfect characteristics for return loss and radiated power can be shared with antenna users without sharing the actual antenna structure in cases involving confidentiality limitations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.715-720
• /
• 2016

This paper proposes a PWM (Pulse Width Modulation) voltage mode DC-DC step-up converter for portable devices. The converter, which is operated with a 1 MHz switching frequency, is capable of reducing the mounting area of passive devices, such as inductor and capacitor, and is suitable for compact mobile products. This step-up converter consists of a power stage and a control block. The circuit elements of the power stage are an inductor, output capacitor, MOS transistors Meanwhile, control block consist of OPAMP (operational amplifier), BGR (band gap reference), soft-start, hysteresis comparator, and non-overlap driver and some protection circuits (OVP, TSD, UVLO). The hysteresis comparator and non-overlapping drivers reduce the output ripple and the effects of noise to improve safety. The proposed step-up converter was designed and verified in Magnachip/Hynix 0.18um 1-poly, 6-metal CMOS process technology. The output voltage was 5 V with a 3.3 V input voltage, output current of 100 mA, output ripple less than 1% of the output voltage, and a switching frequency of 1 MHz. These designed DC-DC step-up converters could be applied to the Personal Digital Assistants(PDA), cellular Phones, Laptop Computer, etc.

• Journal of KIISE:Software and Applications
• /
• v.36 no.6
• /
• pp.431-442
• /
• 2009

The Software Product Line (SPL) engineering is one of the most promising software development paradigms. With Feature-Oriented Reuse Method (FORM), reusable and flexible components can be built to aid the delivery of various software products such as mobile phone and digital TV applications based on commonalities and variabilities identified during Feature modeling. Model Driven Architecture (MDA) is also an emerging technology which supports developing software products to work on different platforms with platform independent models (PIM). Combining advantages of these two approaches is helpful to build a group of software products which share common Features while working on various platforms. As first step to combine FORM with MDA, we extend UML2.0 with profiles by which FORM architectures and parameterized Statecharts can be modeled. Secondly, we provide rules to examine whether Features are allocated at positions of elements of Statecharts consistently between a Feature model and a parameterized Statechart. Some rules are designed to check the consistency between FORM architectures and parameterized Statecharts. A case study on an elevator control system is provided to demonstrate the feasibility of our modeling approach and consistency checking rules.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.777-787
• /
• 2020

With the development of the Internet and the spread of mobile devices, the online market is growing rapidly. As the number of customers using online shopping malls explodes, research is being conducted on the analysis of usage behavior from customer data, personalized product recommendations, and service development. Thus, this paper seeks to analyze the overall process of online shopping malls through process mining, and to identify the factors that influence users' purchases. The data used are from a large online shopping mall, and R was the analysis tool. The results show that customer activity was most prominent in categories with event elements, such as unconventional discounts and monthly giveaway events. On the other hand, searches, logins, and campaign activity were found to be less relevant than their importance. Those are very important, because they can provide clues to a customer's information and needs. Therefore, it is necessary to refine the recommendations from related search words, and to manage activity, such as coupons provided when customers log in. In addition to the previous discussion, this paper proposes various business strategies to enhance the competitiveness of online shopping malls and to increase profits.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.219-226
• /
• 2013

Organic semiconductor-based soft electronics has potential advantages for next-generation electronics and displays, which request mobile convenience, flexibility, light-weight, large area, etc. Organic field-effect transistors (OFET) are core elements for soft electronic applications, such as e-paper, e-book, smart card, RFID tag, photovoltaics, portable computer, sensor, memory, etc. An optimal multi-layered structure of organic semiconductor, insulator, and electrodes is required to achieve high-performance OFET. Since most organic semiconductors are self-assembled structures with weak van der Waals forces during film formation, their crystalline structures and orientation are significantly affected by environmental conditions, specifically, substrate properties of surface energy and roughness, changing the corresponding OFET. Organo-compatible insulators and surface treatments can induce the crystal structure and orientation of solution- or vacuum-processable organic semiconductors preferential to the charge-carrier transport in OFET.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.303-313
• /
• 2018

In order to provide quality services across international airports, airline personnel must rapidly and effectively develop and share knowledge. Combining components of adaptive structuration theory (AST) and media synchronicity theory (MST), a research framework was developed to convey three distinct stages of knowledge sharing. We use the grounded theory research method for the qualitative data collected from audio transcripts of employees learning how to use and work with company issued smartphones with push-to-talk functionalities. Data was collected from 33 operations personnel. The results of the content analysis are recorded for the elements of each of the three concepts of our research framework. During the social interaction stage, the content of the audio conversations shifts mainly from conflict management to task management; for media synchronicity, from quality to quantity; for productive outcomes, from efficiency to commitment. New insights are uncovered from our analysis of data from the field as users advance from learning how to use the mobile devices, to using the devices for managing knowledge for their work in the airline industry.