• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.874-887
• /
• 2011

Compared to nomadic and fixed relay stations, vehicle-mounted mobile relay stations show different characteristics caused by the time-variant topology, due to their mobility. Especially, a relay mounted in a vehicle is differentiated from nomadic or fixed relay by the restricted distance between the relay and associated mobile station and the variable density of relay deployment in a cell. In this paper, we identify the characteristics of vehicle-mounted mobile relay stations and provide some parameters that highly influence the performance of vehicle-mounted relay. Through simulation, we measure the effect of relay density, zone ratio, relay transmission power, and frame transmission mode on the performance of vehicle-mounted relay. The results show that the performance of vehicle-mounted relay is highly susceptible to the above vehicle-mounted relay-specific parameters.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.562-570
• /
• 2011

In this paper, a distributed mobile relay power control (DMRPC) scheme for maximizing individual cell throughput is proposed for mobile relay aided multi-cell orthogonal frequency division multiplexing (OFDM)-time division duplex (TDD) system. In the system with DMRPC, the power levels of relay's are controlled by individual cell without cell cooperation and signalling overhead. It is demonstrated by numerical simulation that DMRPC provides the better cell throughput performance than either the full power relay aided system or conventional system without relay does. Moreover, it is also shown that relay aided systems with DMRPC, and the conventional system have almost identical cell edge throughput, while full power relay aided systems show worse performance in cell edge throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.850-857
• /
• 2012

A moving network is the usage model that provides the mobile stations to the communication service via the mobile relay deployed in the high-speed vehicle. The mobile relay periodically performs the signal strength measurement of the neighbor base stations to select the target base station during the handover procedure. The mobile stations experience the service disruption during the measurement of the mobile relay. In this paper, we propose the estimation based scanning method to overcome the service disruption of the mobile stations connected via the mobile relay. In the proposed method, mobile stations subordinated in the mobile relay periodically measure the signal strength of neighbor base stations in order to perform handover. The measured signal strength is used to estimate the signal strength between the mobile relay and the neighbor base station. We performed simulations in order to evaluate the performance of the proposed method in terms of the estimation accuracy and the overhead due to the exchange of channel information. By the simulation result, The estimation error is less than 4dBm when more than 6 mobile stations are used for the estimation. The overhead caused by the proposed method is less than that caused by the direct measurement of the mobile relay when the data rate is more than 8Mbps.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.45-52
• /
• 2006

Mobile Ad-hoc Network(MANET) could be applied to various applications by virtue of its characteristics such as self-organizing and infrastructure-free network. This paper proposes a multimedia application service model for MANET, called multi-hop Relay(mRelay) system. It supports a multi-hop communication-based multimedia service interworked with Internet by using an unmanned moving robot with wireless multimedia communication function as a mRelay terminal. The modified AODV routing protocol was applied to the terminal and it was verified that composition and maintenance of mobile Ad-hoc network in mRelay system under the various indoor scenarios were successful and stable multi-hop multimedia services were possible. The mRelay system can be applicable to various application services of mobile Ad-hoc networks.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.45-53
• /
• 2013

Multi-hop cellular networks (MCNs), which reduce the transmit power, mitigate the inter-cell interference, and improve the system performance, have been widely studied nowadays. The relay selection scheme is a key technique that achieves these advantages, and inappropriate relay selection causes frequent relay switchings, which deteriorates the overall performance. In this study, we analyze the conditions for relay switching in MCNs and obtain the expressions for the relay switching rate and relay activation time. Two mobile-based relay selection schemes are proposed on the basis of this analysis. These schemes select the relay node with the longest relay activation time and minimal relay switching rate through mobility prediction of the mobile node requiring relay and available relay nodes. We compare the system performances via simulation and analyze the impact of various parameters on the system performance. The results show that the two proposed schemes can obtain a lower relay switching rate and longer relay activation time when there is no reduction in the system throughput as compared with the existing schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1624-1641
• /
• 2015

Instantaneous relay (relay-without-delay) using interference alignment is a promising approach to neutralizing interference and improving system capacity. In Wang Chenwei's work, a 2-user scenario required both source and relay to access the global channel state information (CSI). This paper shows a new method of interference alignment improves the degrees of freedom (DoF) prominently for the 3-user MIMO interference channel with instantaneous relay. This new method is focused on the relay node that completes the alignment interference neutralization so the global CSI is obtained only once and the pressure on the base station can be mitigated. In addition, the 3-user MIMO interference channels with instantaneous relay can achieve 2M DoF when source and destination have M antennas, respectively. This method shows 33% improvement over the conventional method using interference alignment which obtains 3M/2 DoF.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.5
• /
• pp.103-108
• /
• 2016

In this paper, we propose a resource allocation scheme that guarantees transmission rate for each mobile stations by mitigating interference between a base station-to-mobile station link and a relay station-to-mobile station link. Specifically, we dynamically adjust the boundary between access zone and relay zone using signal to interference plus noise ratio. Moreover, we cluster the mobile stations under sever interference and manage the channel quality of these mobile stations by allocating additional radio resource. Our simulation results show that the proposed scheme can improve the efficiency of radio resources and ensure fairness among mobile stations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.13-19
• /
• 2008

In this paper, the new cooperative communication techniques is proposed for multi-input multi-output(MIMO)-orthogonal frequency division multiplexing (OFDM) system using the relay with multiple antenna. As the MIMO channel is formed by space time coding at the MS(mobile station)-RS(relay station) and RS-BS(base station), we can get the cooperative diversity and MIMO diversity gain simultaneously. Therefore, the performance of MIMO-OFDM system using the relay with multiple-antennas is very improved. And the simple power allocation technique is Proposed for the transmitting power of the mobile station and the relay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7C
• /
• pp.592-600
• /
• 2012

In this paper, we proposed that decentralized frequency allocation scheme(DFAS) without network entry procedure between relays in mobile relay system. Frequency Indicator(FI) signal which is the reference signal of frequency division of each relay and Energy Detection(ED) region are defined. In addition, the mobile connected to the relay transmits the FI signal to neighbor relays in order to facilitate communication between relays. Finally, by using this scheme, the cell throughput improvement is confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.394-400
• /
• 2010

Mobile Multi-hop Relaying (MMR) system can provide increased system capacity of wireless access network by coverage extension and enhanced transmission rate within the Base Station (BS) coverage area. The previous researches for the MMR system with a non-transparent mode Relay Station (RS) do not consider channel selection procedure of Mobile Station (MS), co-channel interference and Multi-hop Relay Base Station (MR-BS) coverage and RS coverage ratio in MMR system. In this paper, we investigate the performance of MMR uplink system in multicell environments with various topologies. The performance is presented in terms of call blocking probability, channel utilization, outage probability and system throughput by varying offered load. It is found that, for certain system parameters, the MMR uplink system achieve the maximum system throughput when MR-BS coverage to RS coverage ratio is 7.