• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.397-405
• /
• 2004

In this paper, performance analysis of mobile phone with internal antenna for PCS band was carried out. The radiation patterns for antenna and mobile phone with internal antenna were simulated by using 3D simulation program, HFSS and SEMCAD. Radiation pattern variation was observed according to installation of LED circuit and ground pattern and by using simulation radiation pattern was improved. And radiation patterns of mobile phones with internal and external antennas were measured by using for field measurement system and chamber. Measured radiation pattern for mobile phone with internal antenna shows good agreement with simulation result. And the radio sensitivities of mobile phones with internal and external antennas were measured by using Agilent E5515C and chamber and compared. The measured radio sensitivity of mobile phone with internal antenna shows proper performances comparable to other model with external antenna. Measured result shows that the difference on averaged co-polar radio sensitivity is 0.12 ㏈.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.169-171
• /
• 2008

An internal antenna for small mobile systems is proposed to support the DVB-H system. It consists of two antenna elements, which are a folded planar monopole for DVB-H and PIFA for GSM/DCS/PCS, and a meander line and RF cable are used to increase the ground plane. Experimental results of the antenna are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.161-166
• /
• 2009

In this paper, we propose the internal mobile antenna for TDMB and KPCS. The proposed antenna is made of different dielectric substrate and it has small size ($45{\times}8{\times}8\;mm$, about 2.8 cc) for mobile device. TDMB antenna is designed spiral structure that makes maximum current for each cell and KPCS antenna is PIFA that is usually used for internal antenna. In order to compensate length of resonance TDMB antenna has a large inductor above 100 nH. In this case, the inductor isolate KPCS signal at TDMB by cutting high frequency. Also the antenna has good isolation because TDMB radiator is parasitic element in KPCS band. We simulated the antenna by using CST microwave studio and measured performance of the antenna in anechoic chamber Proposed antenna has $-6{\sim}-14\;dBi$ gain for TDMB and $-3.5{\sim}-5\;dBi$ gain for KPCS.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.124-132
• /
• 2015

In this paper, we proposed a multiband internal antenna for LTE mobile handset that could be used for mobile devices. The proposed antenna has a volume of $50mm(W){\times}21mm(L){\times}5mm(H)$, ground plane size is $60mm(W){\times}100mm(L)$, and covers 9 service frequency bands including LTE(Long Term Evolution) band with VSWR(Vlotage Standing Wave Ratio) less than 3. With rapid change of technologies, people wants to include more function into one device. In addition, each country uses different frequency band for traffic service, it is necessary to design multiband antenna for mobile phone since traveling foreign country needs roaming. And if we can cover several services with one antenna, cost and volume needed for antennas are minimized. A HFSS (High Frequency Structure Simulator) of the Ansoft Corporation based on a finite element method is employed to analyze the proposed antenna in the design process and to compare the simulation and experimental results.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.339-344
• /
• 2011

In this paper, we proposed an internal multi-band monopole antenna for mobile phone that can be used for smart phones. The proposed antenna has a small volume of $38{\times}8.5{\times}5\;mm^3$, ground size is $100{\times}60\;mm^2$, and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), DCS (Digital Communications System : 1710-1880 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), Bluetooth (2400-2483 MHz), Wibro (2300-2390 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands. The measured peak gains of the implemented antenna are 1.15 dBi at 920 MHz, 3.58 dBi at 1795 MHz, 3.46 dBi at 1810 MHz, 2.91 dBi at 1920 MHz, 5.18 dBi at 2345 MHz, 3.37 dBi at 2442 MHz.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.484-491
• /
• 2013

In this paper, we proposed an internal multiband loop embedded monopole antenna for mobile handset that could be used for smart phones. The proposed antenna has a volume of 40 mm(W) ${\times}$ 15 mm(L) ${\times}$ 5 mm(H), ground plane size is 40 mm(W) ${\times}$ 80 mm(L), and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), WCDMA (Wideband Code Division Multiple Access : 1920-2170 MHz), Wibro (2300-2390 MHz), Bluetooth (2400-2483 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands for VSWR (voltage standing wave ration) less than 3. The proposed loop adding design at middle section of longest branch showed wide impedance bandwidth for the lowest resonance frequency band. The proposed antenna have a lowest resonance frequency band from 738 MHz to 1075 MHz for S11 value of -6dB. A HFSS (High Frequency Structure Simulator) of the Ansys Corporation based on a finite element method is employed to analyze the proposed antenna in the design process and to compare the simulation and experimental results.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.16-20
• /
• 2011

In this paper, we designed and implemented an internal multi-band folded monopole antenna for mobile handset. The proposed antenna covers Global System for Mobile Communications (GSM900: 880~960 MHz), Digital Communications System (DCS: 1710~1880 MHz), US-Personal Communications Service (US-PCS: 1850~1990 MHz), Bluetooth(2400~2484 MHz), WiMAX(3400~3600 MHz), and Wireless Local Area Network (WLAN: 5150~5350 MHz, 5725~5875 MHz) band for Voltage Standing Wave Ratio $(VSWR)\;{\le}\; 3$. The measured peak gains of the implemented antenna are -1.78dBi at 920MHz, 2.72dBi at 1795MHz, 2.25dBi at 1920MHz, 2.34dBi at 2442MHz, 2.11 dBi at 3550MHz, and 2.04 dBi at 5250MHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.119-125
• /
• 2007

In this paper, a multi-band folded planar monopole internal antenna for mobile handset applications is proposed. The proposed antenna has multi-resonances, which is different from a conventional folded monopole antenna, and it provides a wide bandwidth at high frequency bands. The measured impedance bandwidth (VSWR < 3) is 180 MHz and 1880 MHz in lower and higher frequency bands, respectively. The proposed antenna can effectively cover most wireless communication bands including CDMA, GSM, GPS, DCS, PCS, and W-CDMA, WiBro and S-DMB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.113-118
• /
• 2007

KPCS internal antenna in this paper, is designed and fabricated using the theory based on the folded monopole antenna. I propose folded monopole internal antenna which has high gain low profile structure with easy installation into the handset of mobile phone. Design frequency is 1.8 GHz that is a center frequency of Korea PCS frequency band, and the impedance variances due to change of antenna structure as a length and width are simulated. Measurements show that input VSWR range under 2:1 is 1.72 - 1.88 GHz, and radiated H-plane pattern is omnidirectional under passive state. Active sensitivities and output power of phone applied antenna are $-105\;{\sim}\;-108\;dBm$ and $22.5\;{\sim}\;23.6\;dBm$ max., respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.280-286
• /
• 2006

Determination method of optimum feeding point for the PIFA type internal antenna for the mobile phone handset was studied. Fundamental theory is that radiated gain is basically depended upon the electric field strength between PIFA conductor and ground plane. Feeding point, slit configuration, material and structure of carrier are main factors fur the PIFA performances. It is shown that maximum electric field strengths of other feeding points decrease in -2dB to -10 dB than optimum point. Ansoft HFSS EM simulator was applied to determine the best feeding point for 2 models of Samsung Electronics mobile phone handset.