• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.373-378
• /
• 1996

알칼리 및 알칼리토금속(Cs,Rb,Ba,Sr), 전이감속원소(Zr,Fe,Mo,Ni,Pd,Rh), 란탄족 (La,Y,Nd,Ce,Eu.) 및 MA(Np,Am)등 17개 원소로 구성된 질산매질의 모의 방사성용액에서 옥살산에 의한 란탄족과 MA(Minor Actinide)의 공침전 연구를 수행하였다. 옥살산농도 0.5M에서 질산농도의 영향과 아스코빅산 첨가에 따른 원소들의 침전율이 조사되었다. 각 원소들의 침전율은 질산농도에 따라 약간 감소하였으나 란탄족과 MA는 99%이상 공침전되었다. 아스코빅산이 첨가되는 경우 Pd이 금속으로 환원침전되고 Mo.Fe,Ni.Ba의 경우는 침전율이 10∼20% 감소하는 것으로 나타났으나 기타원소들에 대해서는 영향이 나타나지 않았다. Pd의 환원침전은 질산농도 1.0M미만에서 일어났으며. 아스코빅산 농도가 0.01M∼0.02M 부근에서 최대로 나타났다. 하이드라진이 아스코빅산과 같이 첨가될 때 Pd의 환원침전을 억제하는 역할을 하였다.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.99-104
• /
• 1998

사용중인 중화학 설비의 재료물성의 경년열화적 특성을 평가하기 위하여 기존 실험법의 인장시험편이나 충격시험편을 채취하기는 실제적으로 불가능하다. 인장강도등 인장특성과 비교한 결과 인장강도, 연신율, 항복강도, 종탄성계수와 소형펀치실험의 각 특성과 선형적 관계를 얻을 수 있었다. 또한 경년열화도를 평가하는 두구인 파면천이온도(FATT)와 비교하기 위하여 저온 소형펀치실험을 실시한 결과 충격실험을 통하여 구한 FATT온도와 소형펀치실험의 천이온도 ( $T_{sp}$ )와 일정한 관계가 있음이 밝혀져 사용재의 열화도를 평가할 수 있다.

• Membrane and Water Treatment
• /
• v.14 no.3
• /
• pp.121-128
• /
• 2023

This study introduces a NaOH/Zn-assisted hydrothermal method for the synthesis of zeolites derived from coal ash (CA). A zeolite/Zn adsorbent is successfully prepared by the activation of CA with NaOH and Zn; it is characterized by a high surface area and a negative surface charge.Methylene blue (MB) and methyl orange (MO) are selected as dye pollutants, and their adsorption onto the zeolite/Zn adsorbent is investigated. Results show the high adsorption capacities of MB and MO and that the negative surface charge facilitates electrostatic interactions between the adsorbates and adsorbents. The zeolite/Zn adsorbents shows the selective adsorption of positively charged dye MB via electrostatic interactions between the =NH+ group (positive dipole) and the oxygen functional group of the adsorbents (negative dipole). The selectivity for the positively charged dye is sufficiently high, with the removal efficiency reaching 99.41% within 10 min. By contrast, the negatively charged dye MO exhibits negligible absorption. These findings confirm the role of electrostatic interactions in the adsorption of MB, in addition to the effect of a large surface area. The results of this study are expected to facilitate the development of simple, eco-friendly, and cost-effective zeolite-based adsorptive composites from CA residuals for the selective removal of dye pollutants from CA waste.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.44.1-44.1
• /
• 2019

We generate new intermediate images between observed consecutive solar images using NVIDIA's SuperSloMo that is a novel video interpolation method. This technique creates intermediate frames between two successive frames to form a coherent video sequence for both spatially and temporally. By using SuperSloMo, we create 600 images (12-second interval) using the observed 121 SDO/AIA 304 Å images (1-minute interval) of a filament eruption event on December 3, 2012. We compare the generated images with the original 12-second images. For the generated 480 images the correlation coefficient (CC), the relative error (R1), and the normalized mean square error (R2) are 0.99, 0.40, and 0.86, respectively. We construct a video made of the generated images and find a smoother erupting movement. In addition, we generate nonexistent 2.4-second interval images using the original 12-second interval images, showing slow motions in the eruption. We will discuss possible applications of this method.

• Korean Journal of Materials Research
• /
• v.24 no.4
• /
• pp.201-206
• /
• 2014

TiC-21 mol% Mo solid solution (${\delta}$-phase) and TiC-99 mol% Mo solid solution (${\beta}$-phase), and TiC-(80~90) mol% Mo hypo-eutectic composite were deformed by compression in a temperature range from room to 2300 K and in a strain rate range from $4.9{\times}10^{-5}$ to $6.9{\times}10^{-3}/s$. The deformation behaviors of the composites were analyzed from the strengths of the ${\delta}$- and ${\beta}$-phases. It was found that the high strength of the eutectic composite is due primarily to solution hardening of TiC by Mo, and that the ${\delta}$-phase undergoes an appreciable plastic deformation at and above 1420 K even at 0.2% plastic strain of the composite. The yield strength of the three kinds of phase up to 1420 K is quantitatively explained by the rule of mixture, where internal stresses introduced by plastic deformation are taken into account. Above 1420 K, however, the calculated yield strength was considerably larger than the measured strength. The yield stress of ${\beta}$-phase was much larger than that of pure TiC. A good linear relationship was held between the yield stress and the plastic strain rate in a double-logarithmic plot. The deformation behavior in ${\delta}$-phase was different among the three temperature ranges tested, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurred, and from the beginning the work hardening level was high. At the tested temperature, a good linear relationship was held in the double logarithmic plot of the yield stress against the plastic strain rate. The strain rate dependence of the yield stress was very weak up to 1273 K in the hypo-eutectic composite, but it became stronger as the temperature rose.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.318-321
• /
• 2005

The design and performance test of a low NOx gas turbine combustor to be used in 55kW class micro-gasturbine engine was performed in KARI's combustion test facility. The combustor is reverse flow-can type for easy installation of injector and other parts and LNG is used as fuel. The performance targets are $99.5\%$ combustion efficiency, less 10ppm NOx, $30\%$ patten factor and $4\%$ pressure loss. Most of the performances required are satisfied.

• 대한예방의학회:학술대회논문집
• /
• 1999.10a
• /
• pp.60-61
• /
• 1999

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.99.2-99.2
• /
• 2014

We investigate how a solar eruption occurs in an environment where a solar wind exists during a pre-eruptive phase. To understand it, we have performed three-dimensional simulations based on a zero-beta magnetohydrodynamic (MHD) equations in various ways to drive an eruption with a solar wind. A pre-eruptive state is derived by applying a nonlinear force-free reconstruction method to a flux emergence full MHD simulation. We discuss what is the most appropriate way to drive a solar wind-related eruption.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.99.2-99
• /
• 2002

Contents 1 In this paper a machine vision system for recognizing and classifying the patterns and marks engraved by die molding or laser marking on glass panel of computer monitor is suggested and evaluated experimentally. The vision system is equipped with a neural network based pattern classifier and searching process based on normalized grayscale correlation and adaptive binarization, which is applicable to the cases in which the segmentation of the pattern area from background using the ordinary blob coloring technique is quite difficult. Inspection process is accomplished via the way of NGC hypothesis and ANN verification. The proposed pattern recognition system is composed of three...

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.99-99
• /
• 2014

Transparent oxide semiconductors (TOSs) are. currently attracting attention for application to transparent electrodes in optoelectronic devices and active channel layers in thin-film transistors. One of the key issues for the realization of next generation transparent electronic devices such as transparent complementary metal-oxide-semiconductor thin-film transistors (CMOS TFTs), transparent wall light, sensors, and transparent solar cell is to develop p-type TOSs. In this talks, I will introduce issues and status related to p-type TOSs such as LnCuOQ (Ln=lanthanide, Q=S, Se), $SrCu_2O_2$, $CuMO_2$ (M=Al, Ga, Cr, In), ZnO, $Cu_2O$ and SnO. The growth and properties of SnO and Cu-based oxides and their application to electronic devices will be discussed.