• 한국식품영양학회지
• /
• 제13권6호
• /
• pp.578-584
• /
• 2000

설탕 20%를 탄소원으로 하고, 동아를 15%, 20%, 25%로 달리하여 효모를 가해 5~1$0^{\circ}C$에서 100일간 발효시켜서 동아주를 제조하였다. 총당은 동아함량 15%짜리는 8.0%, 20%짜리는 8.6%. 25%짜리는 8.3%를 나타냈고, 환원당은 15%짜리는 7.4%, 20%짜리는 7.6%, 25%짜리는 7.4%를 나타냈다. 단백질 함량은 동아함량 15%짜리는 10.3mg/ml, 20%짜리는 9.8mg/ml, 25%짜리는 11.3mg/ml를 나타냈고, 아미노산 함량은 동아함량 15%짜리는 0.13$\mu$mo1/ml, 20%짜리는 0.03$\mu$mo1/ml, 25%짜리는 0.03$\mu$mo1/ml을 나타냈다. pH는 동아함량15%짜리는 3.88, 20%짜리는 3.99, 25%짜리는 3.97을 나타냈고, 산도는 15%짜리는 0.37%, 20%짜리는 0.44%, 25%짜리는 0.43%를 나타냈다. 균체수는 동아함량 15%짜리는 8.33logCFU/ml, 20%짜리는 8.56 logCFU/ml, 25%짜리는 8.57 log CFU/ml를 나타냈다. 에탄올 함량은 동아함량 15%짜리는 13.4%, 20%짜리는 14.9%, 25%짜리는 15.5%를 나타냈다. 숙신산 함량은 1,407~1,800mg/l 범위를 나타냈으며, 모두 acetic acid, pyruvic acid, citric acid, lactic acid의 순으로 많은 양을 나타냈다. 기호도는 동아함량 15짜리는 3.93, 20%짜리는 3.66, 25%짜리는 3.40을 나타냈다.

• 자원리싸이클링
• /
• 제4권3호
• /
• pp.2-9
• /
• 1995

탈황 폐촉매 중에 함유되어 있는 Ni, V 및 Mo을 배소, 암모니아 침출 및 용매추출법을 이용하여 분리.회수하는 프로세스에 대하여 연구하였다. 폐촉매를 $400^{\circ}C$로 3시간 동안 배소한 후, 20mesh 이하로 분쇄하여, 고액비 50g/d㎥의 조건에서 100g/d㎥-(NH$_4$)$_2$CO$_3$를 침출제로 하여 $80^{\circ}C$에서 침출한 결과 Ni, V 및 Mo의 침출율은 각각 81.2%, 65%, 87.5%이었다. 이 침출액을 방냉하면 침출액 중의 74%의 V이 바나듐산 나트륨염의 형태로 침전되어 순도 95.7%의 V을 회수할 수 있었다. 1차 침출 후의 잔사에$ Na_2$$CO_3$를 가하여 $1000^{\circ}C$에서 재차 배소한 후, 온수에 침출하여 잔존된 Mo과 V을 95%이상 침출되었다. 1차 침출액 중의 Ni, V 및 Mo을 용매추출법으로 분리.정제하였다. 용액 중의 Ni는 MSP-8, V은 TOMAC을 추출제로 하여 추출.분리하고 Mo은 raffinate로 분리하였다. Batch 추출에 의하여 Ni은 95%, V은 98%가 유기상에 추출되었으며, 역추출액에 환원제를 첨가하여 순도 99%이상의 V을 회수하였다.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.208-213
• /
• 2019

In this study, lanthanum oxide ($La_2O_3$) dispersed molybdenum ($Mo-La_2O_3$) alloys are fabricated using lanthanum nitrate solution and nanosized Mo particles produced by hydrogen reduction of molybdenum oxide. The effect of $La_2O_3$ dispersion in a Mo matrix on the fracture toughness at room temperature is demonstrated through the formation behavior of $La_2O_3$ from the precursor and three-point bending test using a single-edge notched bend specimen. The relative density of the $Mo-0.3La_2O_3$ specimen sintered by pressureless sintering is approximately 99%, and $La_2O_3$ with a size of hundreds of nanometers is uniformly distributed in the Mo matrix. It is also confirmed that the fracture toughness is $19.46MPa{\cdot}m^{1/2}$, an improvement of approximately 40% over the fracture toughness of $13.50MPa{\cdot}m^{1/2}$ on a pure-Mo specimen without $La_2O_3$, and this difference in the fracture toughness occurs because of the changes in fracture mode of the Mo matrix caused by the dispersion of $La_2O_3$.

• 한국분말재료학회지
• /
• 제16권5호
• /
• pp.351-357
• /
• 2009

A two-step recovery method was developed to produce copper powders from copper chloride waste solution as byproducts of MoO$_3$ leaching process. The first step consisted of replacing noble copper ions with external Fe$^{3+}$ ions which were formed by dissolving iron scraps in the copper chloride waste solution. The replaced copper ions were subsequently precipitated as copper powders. The second step was cementation of entire solution mixture to separate (pure) copper powders from aqueous solution of iron chloride. Cementation process variables of temperature, time, and added amount of iron scraps were optimized by using design of experiment method and individual effects on yield and efficiency of copper powder recovery were investigated. Copper powders thus obtained from cementation process were further characterized using various analytical tools such as XRD, SEM-EDS and laser diffraction and scattering methods.Cementation process necessitated further purification of recovered copper powders and centrifugal separation method was employed, which successfully yielded copper powders of more than 99% purity and average 1$\sim$2$\mu$m in size.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.405-411
• /
• 2012

Recovery of copper powder from copper chloride solution used in $MoO_3$ leaching process was carried out using a cementation method. Cementation is a simple and economical process, necessitating less energy compared with other recovery methods. Cementation utilizes significant difference in standard reduction potential between copper and iron under standard condition. In the present research, Cementation process variables of temperature, time, and added amount of iron scraps were optimized by using design of experiment method and individual effects on yield and efficiency of copper powder recovery were investigated using bench-scale cementation reaction system. Copper powders thus obtained from cementation process were further characterized using various analytical tools such as XRF, SEM-EDS and laser diffraction and scattering methods. Cementation process necessitated further purification of recovered copper powders and centrifugal separation method was employed, which successfully yielded copper powders of more than 99.65% purity and average $1{\mu}m$ in size.

• Nuclear Engineering and Technology
• /
• 제30권2호
• /
• pp.99-111
• /
• 1998

Chemical composition of the insoluble residue in a simulated spent PWR fuel(SIMRJEL) were studied. SIMFUELS were prepared by adding calculated amount of FP(fission product) elements with a burnup of 3.6% FIMA(fission per initial metal atom) to uranium in nitrate solution, evaporating the mixed solution to dryness, calcining at 90$0^{\circ}C$ in a stream of 4% H$_2$ + 96% He, and heating the pellet at 140$0^{\circ}C$ under high and low oxygen potentials. Insoluble residue was obtained from the dissolution of the SIMFUEL with HNO$_3$(1 : 1). The chemical composition of the SIMFUELs and the insoluble residues was determined by EPMA(electron probe microanalysis), XPS(X-ray photoelectron spectroscopy) and by XRD (X-ray diffraction) measurements. All of the insoluble residues suspended and precipitated were composed mainly of Mo, Ru with a small amount of Zr, Rh, Pd and Cd. The amount of insoluble residue(<1 wt.%) and a Mo/Ru ratio decreased with increasing oxygen potential. Formation of the zirconium molybdate precipitate, ZrMo$_2$O$_{7}$(OH)$_2$($H_2O$)$_2$, was observed in the residues. The possible role of Mo on the phase formation was discussed in regard to oxygen potential.l.

• Korean Chemical Engineering Research
• /
• 제43권6호
• /
• pp.722-727
• /
• 2005

Dow99Ca350, MFG-220, Finex CS-10GC는 이온 교환 수지로써, 당 분리에 주로 사용되며, 모두 poly styrene DVB를 기본 골격으로 술폰산염, 혹은 술폰산을 작용기로 하고 있다. 이 분리 수지들은 이미 제당 산업의 연속 분리 공정에서 사용되고 있으며, 이에 대해 본 실험은 온도의 영향으로 인한 Dow99Ca350, MFG-220과 Finex CS-10GC의 분리수지에서 당의 체류 혹은 흡착 특성 변화를 알아보기 위하여 수행되었다. 당 분리의 시료로써 사용된 물질은 과당과 포도당으로써 위의 분리 수지와 함께 제당 산업에서 널리 사용된다. Dow99Ca350의 팽윤 시험, 공극률 시험, 펄스 시험, 전단 분석을 통해 온도에 대한 영향을 확인하였다. MFG-220, Finex CS-10GC의 경우, 펄스 시험을 통해 온도 변화에 의한 크로마토그램의 변화를 알아보았다. 실험의 결과 Dow99Ca350, MFG-220과 Finex CS-10GC는 과당과 포도당 각각 최대 1.76, 3.37％의 체류 시간 변화를 보임으로써 온도에 안정적인 경향성을 보였다.

• Archives of Reconstructive Microsurgery
• /
• 제10권1호
• /
• pp.1-6
• /
• 2001

Free flap transplantation demands meticulous microsurgical technique to cover the exposed vital structures which is important to restore and maintain functions of the extremities. From July 1992 through December 2000, 99 patients were received reconstructive microsurgery in the upper and lower extremity at Department of Orthopedic Surgery, Chonbuk National University Hospital. The most common cause in the upper extremity was industrial accident, 8 cases of total 15 cases and in the lower extremity was traffic accident, 66 cases of total 84 cases. The most commonly involved site was thumb and finger, 8 cases of total 15 cases and in the lower extremity was leg, 65 cases of total 84 cases. In upper extremity, the wrap around free flap was carried out in 4 cases(4.0%), first dorsal metatarsal artery flap and lateral arm flap were 3 cases(3.0%) each in 15 cases and in lower extremity, latissimus dorsi myocutaneous flap were 23 cases(23.2%), gracilis 20cases(20.2%), and rectus abdominis muscle flap 18(18.2%) in 84 cases. Overall 89 cases(89.9%) of 99 cases were survived and maintained and revealed good cosmetic results.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.245-256
• /
• 2004

The extraction of three kinds of amido podands, N,N,N'N'-tetrabutyl-3-oxa-pentanedi- amide (TBDGA), N,N,N'N'-tetra-isobutyl-3-oxa-pentanediamide(TiBDGA) and N,N,N'N'-tetra- butyl-3,6-dioxa-oct-anediam- ide(TBDOODA) on U(VI),Pu(IV), Am(III), Eu(III) and other metal ions is studied in nitric acid solutions. 40%octanol-kerosene is chosen as diluents to eliminate third phase and emulsion. TBDGA and TiBDGA show extraction selectivity to An(III) and Ln(III) much higher than to U(VI) and Pu(IV). Fe, Ru and Mo is poorly extracted by the three kinds of amid podands in 2~3mol/L $HNO_3$ solutions. Aiming to eliminate interface crude when using simulated HLLW solution in the system of 0.2mol/L TBDGA/Octanol＋kerosene, acetohydroxyamic acid was adapted. Distribution ratio of zirconium was decreased when adding acetohydroxyamic acid in aqueous solution, and interface crude disappeared as mixing extractant with HLLW. The counter-current extraction test is carried out in a set of miniature mixer-settler, with 0.2mol/L TBDGA/ 40% octanol-kerosene as extractant to separate U(VI), Pu(IV), Am(III) and Eu(III) from simulated high level liquid waste(HLLW) solution. In battery A, lanthanides and actinides are coextracted into organic phase with the recovery of 99.98% for U(Ⅵ), >99.99% for Pu(IV), and >99.99% for Am(III) and Eu(III) respectively. In battery R1, 99.99% U, 86.2% Pu and a part of Am or Eu are stripped into aqueous phase by 0.2mol/L acetohydroxyamic acid (AHA) in 0.01mol/L $HNO_3$ solution. In battery $R_2$, Am, Eu and remained Pu are completely back-extracted by 0.2mol/L AHA. This separation process contains no salt reagent, and it is not necessary to dilute HLLW feed.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.23-24
• /
• 2006

Magnetic and magneto-optical properties of regioregular (>99%) poly(3-dodecylthiopenes are investigated. Faraday rotation of spin-coated films show extremely large Verdet constants, falling strongly with decreasing regioregularity. EPR spectroscopy at room temperature shows the presence of about 1 spin/190 monomers, indicative of delocalisation beyond a single polymer chain. SQUID measurements on the polymer give an effective magnetic moment of about 48900 mB, corrsponding to a S-value of 25.000. The Weiss-constant is 1.33 K indicating ferromagnetic coupling. Our experimental results show that organic polymer magnets can be prepared. Large MO effects allow the use of these materials in all-organic MO-sensors and devices.