• 자원환경지질
• /
• 제49권2호
• /
• pp.89-95
• /
• 2016

산화 환원 환경에 민감하게 분별되는 몰리브덴(Mo) 안정동위원소는 지구화학적 과정을 유추할 수 있는 지시자로 사용될 수 있다. 최근 분석기기의 발달로 Mo 동위원소를 활용한 지질물질 연구가 많이 보고되고 있지만, 국내에서는 Mo 동위원소에 관한 연구가 없었다. 이번 연구에서는 컬럼관(BioRad PolyPrep(R) column, 10 ml)과 음이온 교환수지(BioRad Resin AG(R) 1-X8, 200-400 mesh)를 이용한 두 번에 걸친 컬럼 작업을 통해 Mo을 분리 및 회수하였다. 이 분리법을 이용하여 고체(BHVO-2, SDO-1, PACS-2) 및 액체(IAPSO) 표준시료의 Mo 동위원소 분석을 다검출기 유도결합 플라즈마 질량분석기(Multi-collector Inductively Coupled Plasma Mass Spectrometer; MC-ICP-MS)로 측정한 결과, 측정된 표준물질의 Mo 동위원소 분석값은 참값과 오차 범위 내에서 잘 일치하였다.

• 분석과학
• /
• 제16권1호
• /
• pp.82-89
• /
• 2003

Isotope dilution mass spectrometry (IDMS) was applied to the determination of Ni, Cr, Mo in low alloy steel reference materials. The Mo isotope ratio measurement was performed by dynamic reaction cell inductively coupled plasma mass spectrometry (DRC-ICP/MS) using ammonia as a reaction cell gas. In the case of Ni and Cr measurement, all data were obtained at medium resolution mode (m/${\Delta}m=3000$) of double focusing sector field high resolution inductively coupled plasma mass spectrometry (HR-ICP/MS). For the method validation of the technique was assessed using the certified reference materials such as NIST SRM 361, NIST SRM 362, NIST SRM 363, NIST SRM 364, NIST SRM 36b. This method was applied to the determination of Ni, Cr and Mo in low alloy steel sample (CCQM-P25) provided by NMIJ for international comparison study.

• 대한방사선기술학회지:방사선기술과학
• /
• 제24권1호
• /
• pp.49-53
• /
• 2001

A number of radionuclides of interest in nuclear medicine are short lived isotopes that emit only gamma ray. The most of all Dept. of Nuclear Medicine in the hospt. are using the $^{99}Mo-^{99m}Tc$ generator for elution of the short lived isotope $^{99m}TcO_4$. A $^{99}Mo-^{99m}Tc$ generator consists of an alumina column on which $^{99}Mo$ is bound. The parent isotope($^{99}Mo$ : half life 67 hr.) decays to its daughter $^{99m}TcO_4^-$ which is a different element with a shorter half-life. $^{99}Mo$ emitted 41-keV(1.3%), 141-keV(5.6%) 181-keV(6.6%) and 366-keV(1.5%) gamma rays. But $^{99m}TcO_4$ emitted only 140-keV gamma ray. We study about the gamma ray distribution around the $^{99}Mo$ generator. And obtained the result as follows ; 1. Total counted gamma ray from generator smaller in front side than back. 2. The gamma ray emitted from $^{99}Mo$ generator without $^{99m}TcO_4$ vial increased in the back side(Mo column posited side) 3. The gamma ray only from the $^{99m}TcO_4$ vial increased in the front side. 4. Apron can protect gamma ray above 60% of total radiation from the $^{99}Mo$ generator.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.613-623
• /
• 2016

Molybdenum-99 ($^{99}Mo$) is the most important isotope because its daughter isotope, technetium-99m ($^{99m}Tc$), has been the most widely used medical radioisotope for more than 50 years, accounting for > 80% of total nuclear diagnostics worldwide. In this review, radiochemical routes for the production of $^{99}Mo$, and the aspects for selecting a suitable process strategy are discussed from the historical viewpoint of $^{99}Mo$ technology developments. Most of the industrial-scale $^{99}Mo$ processes have been based on the fission of $^{235}U$. Recently, important issues have been raised for the conversion of fission $^{99}Mo$ targets from highly enriched uranium to low enriched uranium (LEU). The development of new LEU targets with higher density was requested to compensate for the loss of $^{99}Mo$ yield, caused by a significant reduction of $^{235}U$ enrichment, from the conversion. As the dramatic increment of intermediate level liquid waste is also expected from the conversion, an effective strategy to reduce the waste generation from the fission $^{99}Mo$ production is required. The mitigation of radioxenon emission from medical radioisotope production facilities is discussed in relation with the monitoring of nuclear explosions and comprehensive nuclear test ban. Lastly, the $^{99}Mo$ production process paired with the Korea Atomic Energy Research Institute's own LEU target is proposed as one of the most suitable processes for the LEU target.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.608-609
• /
• 2018

• Journal of Applied Biological Chemistry
• /
• 제44권3호
• /
• pp.135-139
• /
• 2001

To observe the changes in isotopic composition (${\delta}^{15}N$) of $NO_3{^-}$ during denitrification, an incubation experiment using soil treated with nitrification inhibitor (2-chloro-6-trichloromethyl-pyridine) under water-saturated condition was conducted for 153 h. The $NO_3-N$ concentration decreased from 73.3 to $20.6mg\;kg^{-1}$ during the incubation period, with denitrification rate constant of $0.00905h^{-1}$, and ${\delta}^{15}N$ values of $NO_3-N$ increased from +0.9 to +25.5‰ with decreasing the $NO_3-N$ concentration. The increase in the ${\delta}^{15}N$ values of $NO_3-N$ is due to kinetic isotope fractionation, which always results in $^{15}N$ enrichment of the substrate. The isotopic fractionation factor calculated in this study was 1.0196, an indication that 1.96% more $^{14}NO_3{^-}$ reacted at a given time interval than a comparable number of $^{15}NO_3{^-}$. The ${\delta}^{15}N$ values measured through the incubation study showed a good agreement with the results calculated from the Fochts isotope fractionation model. Our results suggest that when the ${\delta}^{15}N$ of $NO_3{^-}$ is used for tracing the fate of N, the kinetic isotope fractionation associated with denitrification must be taken into consideration.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3291-3300
• /
• 2023

Recently molybdenum alloys have been introduced as accident tolerating materials for cladding of fuel rods. Molybdenum element has seven stable isotopes with different neutron absorption cross section used in various fields, including nuclear physics and radioisotope production. This study presents separation approaches for all intermediate isotopes of molybdenum element by squared-off cascades using a newly developed numerical code with Salp Swarm Algorithm (SSA) optimization algorithm. The parameters of cascade including feed flow rate, feed entry stage, cascade cut, input feed flow rate to gas centrifuges (GCs), and cut of the first stage are optimized to maximize both isotope recovery and cascade capacity. The squared off and squared cascades are studied, and the efficiencies are compared. The results obtained from the optimization showed that for the selected squared off cascade, Mo⁹⁴ in four separation steps, Mo⁹⁵ in five steps, Mo⁹⁶ in six steps, Mo⁹⁷ in seven steps, and Mo⁹⁸ in two steps are separated to the desired concentrations. The highest recovery factor is obtained 63% for Mo⁹⁴ separation and lowest recovery factor is found 45% for Mo⁹⁵.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1863-1870
• /
• 2023

Molybdenum-99 (⁹⁹Mo) is used for preparing Technetium-99 m (^99mTc), which is the most widely used isotope in nuclear medicine. In this work, a study for ⁹⁹Mo production based on a high-power electron accelerator has been performed as an alternative approach to produce ^99mTc. In this study, Monte Carlo MCNPX2.6 code has been used to examine a novel idea of simultaneous hybrid production of ⁹⁹Mo via both photoneutron and neutron capture reactions using an electron accelerator in heavy water tank. It is expected that this conceptual design including an arrangement of metallic plates of ¹⁰⁰Mo and ⁹⁸Mo produces total activity of 97.5 Ci at the end of 20-h continuous e-beam irradiation (30 MeV, 10 mA).

• Journal of Applied Biological Chemistry
• /
• 제42권4호
• /
• pp.186-190
• /
• 1999

Isotope ratio ($^{15}N/^{14}N$) and nitrate-nitrogen concentration in groundwater were measured to investigate the effect of chemical fertilizer and livestock manure on temporal variations in nitrate-nitrogen concentration and to estimate the contribution of fertilizer and manure to groundwater contamination by nitrate. Four study wells from a rural area in Kyonggi province were selected. One well was located on an upper site from a livestock feedlot, and the others were situated at lower sites from the feedlot. The ${\delta}^{15}N$ values were analyzed by a stable isotope ratio mass spectrometer (Micromass, VG Optima IRMS). Reproducibility of the method and precision of the mass spectrometer were below 1.0 and 0.1‰, respectively Even though study wells were located at the same area, nitrate-nitrogen concentrations and ${\delta}^{15}N$ values differed and fluctuated during the sampling period. The ${\delta}^{15}N$ values of well located at upper site from the feedlot were extremely variable (-1.48~20.80‰). The ranges of ${\delta}^{15}N$ value of three wells situated at lower sites from the feedlot were 11.83~20.73 (ave. 16.11), 8.90~11.73 (ave.11.01), and 5.29~12.73‰ (ave. 8.21‰) with increasing distance from the feedlot. The average values of contribution proportion of nitrogen derived from livestock manure to nitrate-nitrogen in groundwater were 79% for the well closet to the feedlot, 44% for the well most distant from the feedlot, and 56% for the well in between the two wells.

• 환경분석과 독성보건
• /
• 제21권4호
• /
• pp.229-236
• /
• 2018

In this study, inter-laboratory comparison was done using elemental analyzer-isotope ratio mass spectrometers (EA-IRMSs) to determine carbon and nitrogen contents as well as stable carbon and nitrogen isotopic compositions (${\delta}^{13}C$ and ${\delta}^{15}N$) of five environmental samples containing lake and marine sediments, higher plant leaves, and fish muscle, and one organic analytical standard (Protein (Casein) Standard OAS). Five national laboratories participated in this comparison study, and each laboratory analyzed all five samples and the analytical standard. Results showed that variations in total organic carbon (TOC) and total nitrogen (TN) contents as well as ${\delta}^{13}C_{TOC}$ and ${\delta}^{15}N_{TN}$ values among the laboratories were large compared to the analytical uncertainties. The results highlighted the inhomogeneity of the test samples and thus, the need to select suitable standard reference materials for future inter-laboratory studies. Further inter-laboratory comparison exercises could promote good measurement practices in the acquisition of stable carbon and nitrogen isotopic composition data.