• Journal of Electrochemical Science and Technology
• /
• 제10권4호
• /
• pp.424-432
• /
• 2019

Planar BiVO₄ and 3 wt% Mo-doped BiVO₄ (abbreviated as Mo:BiVO₄) film were prepared by the facile spin-coating method on fluorine doped SnO₂(FTO) substrate in the same precursor solution including the Mo precursor in Mo:BiVO₄ film. After annealing at a high temperature of 450℃ for 30 min to improve crystallinity, the films exhibited the monoclinic crystalline phase and nanoporous architecture. Both films showed no remarkably discrepancy in crystalline or morphological properties. To investigate the effect of surface passivation exploring the Al₂O₃ layer, the ultra-thin Al₂O₃ layer with a thickness of approximately 2 nm was deposited on BiVO₄ film using the atomic layer deposition (ALD) method. No distinct morphological modification was observed for all prepared BiVO₄ and Mo:BiVO₄ films. Only slightly reduced nanopores were observed. Although both samples showed some reduction of light absorption in the visible wavelength after coating of Al₂O₃ layer, the Al₂O₃ coated BiVO₄ (Al₂O₃/BiVO₄) film exhibited enhanced photoelectrochemical performance in 0.5 M Na₂SO₄ solution (pH 6.5), having higher photocurrent density (0.91 mA/㎠ at 1.23 V vs. reversible hydrogen electrode (RHE), briefly abbreviated as V_RHE) than BiVO₄ film (0.12 mA/㎠ at 1.23 V_RHE). Moreover, Al₂O₃ coating on the Mo:BiVO₄ film exhibited more enhanced photocurrent density (1.5 mA/㎠ at 1.23 V_RHE) than the Mo:BiVO₄ film (0.86 mA/㎠ at 1.23 V_RHE). To examine the reasons, capacitance measurement and Mott-Schottky analysis were conducted, revealing that the significant degradation of capacitance value was observed in both BiVO₄ film and Al₂O₃/Mo:BiVO₄ film, probably due to degraded capacitance by surface passivation. Furthermore, the flat-band potential (V_FB) was negatively shifted to about 200 mV while the electronic conductivities were enhanced by Al₂O₃ coating in both samples, contributing to the advancement of PEC performance by ultra-thin Al₂O₃ layer.

• Corrosion Science and Technology
• /
• 제14권2호
• /
• pp.54-58
• /
• 2015

A heavy oil of low quality has been mainly used in the diesel engine of the merchant ship as the oil price has been significantly jumped for several years. Thus, a combustion chamber of the engine has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas of the combustion chamber has been getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of the engine parts such as exhaust valve, piston crown and cylinder head surrounded with combustion chamber are more serious compared to the other parts of the engine. Therefore, an optimum repair welding for these engine parts is very important to prolong their lifetime in a economical point of view. In this study, 1.25Cr-0.5Mo filler metal was welded with SMAW method in the forged steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected and base metal zones were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. The weld metal and base metal zones exhibited the highest and lowest values of hardness respectively. And, the corrosion resistance of the heat affected and weld metal zones was also increased than that of the base metal zone. Furthermore, it appeared that the corrosive products with red color and local corrosion like as a pitting corrosion were more frequently observed on the surface of the base metal zone compared to the heat affected and weld metal zones. Consequently, it is suggested that the mechanical and corrosion characteristics of the piston crown can be predominantly improved by repair welding method using the 1.25Cr-0.5Mo electrode.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.363-363
• /
• 2013

태양광 발전산업에서 현재 주류인 결정 실리콘 태양전지의 변환효율은 꾸준히 향상되고 있으나, 태양전지의 가격이 매년 서서히 하강되고 있는 실정에서 결정질 실리콘 가격의 상승 등으로 부가가치 창출에 어려움이 있으며, 생산 원가를 낮출 수 있는 태양전지 제조기술로는 2 세대 태양전지로 불리는 박막형이 현재의 대안이며, 특히 에너지 변환 효율과 생산 원가에서 장점이 있는 것이 CIGS 박막 태양전지로 판단된다. 화합물반도체 베이스인 CIGS 박막태양전지는 연구실에서는 세계적으로 20.3% 높은 효율을 보고하고 있으며, 모듈급에서도 13% 효율로 생산이 시작되고 있다. 국내에서도 연구실 규모 뿐만 아니라 대면적(모듈급) CIGS 박막태양전지 증착용 장비, 제조공정 등의 기술개발이 진행되고 있다. CIGSe2를 광흡수층으로 하는 CIGSe2 박막 태양전지의 구조는 여러 층의 단위박막(하부전극, 광흡수층, 버퍼층, 상부투명전극)을 순차적으로 형성시켜 만든다. 이중에 소다라임유리를 기판으로 하는 하부전극은 Mo 재료를 스퍼터링 방법으로 증착하여 주로 사용한다. 하부전극은 우수한 전기적 특성이 요구되며, 주상조직으로 성장하여야 하며, 고온 안정성 확보를 위하여 기판과의 밀착성이 좋아야하고 또한 레이저 패턴시 기판에서 잘 떨어져야 하는 특성을 동시에 가져야 한다. 본 연구에서는 대면적 CIGSe2 박막태양전지에서 요구되는 하부전극 Mo 박막의 제작과 그 특성에 대해 평가하고, 최종적으로 대면적 CIGSe2 박막태양전지 공정에 적용 그 결과를 논하고자 한다.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.461-467
• /
• 2011

Cu(In, Ga)$Se_2$ (CIGS) precursor films were electrodeposited on Mo/glass substrates in acidic solutions containing $Cu^{2+}$, $In^{3+}$, $Ga^{3+}$, and $Se^{4+}$ ions at -0.6 V (SCE) and pH. 1.8. In order to induce recrystallization, the electrodeposited $Cu_{1.00}In_{0.81}Ga_{0.09}Se_{2.08}$ (25.0 at.% Cu + 20.2 at.% In + 2.2 at.% Ga + 52.0 at.% Se) precursor films were annealed under a high Se gas atmosphere for 15, 30, 45, and 60 min, respectively, at $500^{\circ}C$. The Se amount in the film increased from 52 at.% to 62 at.%, whereas the In amount in the film decreased from 20.8 at.% to 9.1 at.% as the annealing time increased from 0 (asdeposited state) to 60 min. These results were attributed to the Se introduced from the furnace atmosphere and reacted with the In present in the precursor films, resulting in the formation of the volatile $In_2Se$. CIGS precursor grains with a cauliflower shape grew as larger grains with the $CuSe_2$ and/or $Cu_{2-x}Se$ faceted phases as the annealing times increased. These faceted phases resulted in rough surface morphologies of the CIGS films. Furthermore, the CIGS layers were not dense because the empty spaces between the grains were not removed via annealing. Uniform thicknesses of the $MoSe_2$ layers occurred at the 45 and 60 min annealing time. This implies that there was a stable reaction between the Mo back electrode and the Se diffused through the CIGS film. The results obtained in the present research were sufficiently different from comparable studies where the recrystallization annealing was performed under an atmosphere of Ar gas only or a low Se gas pressure.

• 한국의학물리학회지:의학물리
• /
• 제22권3호
• /
• pp.148-154
• /
• 2011

TRS-398 프로토콜에서 중심전극에 대한 최근의 연구 결과들을 적용하여 선질인자($k_{Q,Q_0}$)를 평가하였다. 대상 전리함은 PTW-31010과 IBA-CC13이었다. 광자선 및 전자선 선질의 함수로서 선질인자를 계산하였으며 현재 TRS-398 프로토콜의 값들과 비교하였다. PTW-31010 전리함과 같이 알루미늄 전극으로 구성된 전리함에 대하여 새로운 보정을 취하는 경우에 선질인자가 광자선에서 최대 0.4% 그리고 전자선에서 최대 0.9% 증가하는 것으로 나타났다. 또한 IBA-CC13과 같이 C-552 전극을 사용하는 전리함의 경우에 기존의 보정체계를 그대로 적용할 수 있음을 확인하였다.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1770-1776
• /
• 2011

In this study, a new method that can estimate ICG data from a subject's both hands to measure Cardiac Output under convenient sensor environment. With this aim, a grip-type electrode was implemented to measure ICG. To improve the accuracy of measurement, the regression equation was extracted using multiple bio-parameters and our result was compared with the thoracic ICG equipment(Physio Flow$^{(R)}$, PF104D, Manatec Biomedical, France), which is being used in clinics. The subjects consist of 26 men and 4 women(age in $22.0{\pm}3.32$). They are no cardiac disease. Parameters available for regression model were used gender, BMI, MBP, LVET, dZ/dt(max), distance between the measured electrodes, body impedance, and PTT. As a result of analyzing the ICG measurement value on thorax and both hands, the correlation with stroke volume, heart rate, and cardiac output was $R^2$=0.853, $R^2$=0.958 and $R^2$=0.899, respectively.

• Progress in Superconductivity
• /
• 제12권2호
• /
• pp.114-117
• /
• 2011

We report our efforts on the development of Nb-based non-hysteretic Josephson junction fabrication process for quantu device applications. By adopting and modifying the existing Nb-aluminum oxide tunnel junction process, we develop a process for non-hysteretic Josephson junction circuits using metal-silicide as metallic barrier material. We use sputter deposition of Nb and $MoSi_2$, PECVD deposition of silicon oxide as insulator material, and ICP-RIE for metal and oxide etch. The advantage of the metal-silicide barrier in the Nb junction process is that it can be etched in $SF_6$ RIE together with Nb electrode. In order to define a junction area precisely and uniformly, end-point detection for the RIE process is critical. In this paper, we employed thin Al layer for the etch stop, and optimized the etch condition. We have successfully demonstrated that the etch stop properties of the inserted Al layer give a uniform etch profile and a precise thickness control of the base electrode in Nb trilayer junctions.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.481-487
• /
• 2006

Spot-welding is a widely used manufacturing method for thin-sheet components, especially in mass-production industries such as the car industry. Automobiles are often constructed by multi-lap spot welding to secure the passenger from the accident, where optimisation of the welding conditions is a major economic consideration. This research is conducted to investigate weldability characteristics with various welding conditions on the 4-lap spot welded joint of structural steel sheets in automobile. The relationship between the tensile-shear strength and the indentation depth has been investigated to propose the optimum welding conditions. The welding current and the welding time have a greater effect on the welding characteristics than the electrode force. It was found that the electrode force has a relatively close relationship with the expulsion occurrence. The design curves for optimum welding are proposed for the 4-lap spot welded joint.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1397-1399
• /
• 2002

Effects of bottom electrode materials (Al, Cu, Ti, and Mo), included in film bulk acoustic resonators (FBARs), on the orientation of piezoelectric AlN thin films and the frequency response characteristic of resonators were investigated. The texture coefficient (TC) for (002) orientation, crystallite size, full width half maximum (FWHM), and surface roughness of deposited AlN films were measured for the various bottom electrodes. The return tosses estimated from the frequency responses of fabricated resonators were also compared. Experimental results showed that the difference of lattice constant and thermal expansion coefficient between the bottom electrode and the AlN film were the most important factors for achieving a high performance resonator.

• 분석과학
• /
• 제10권6호
• /
• pp.453-458
• /
• 1997

poly(vinyl chloride)와 가소제만으로 된 막을 제조하여 몇 가지 염기성 의약품에 대한 감응 특성을 조사하여 보았다. 감응막을 초기의 전위값으로 빨리 되돌리기 위하여 황산으로 처리하였다. chlorpromazine을 정량할 때 2-nitrophenyl octyl ether을 사용한 막에서 $10^{-6}{\sim}10^{-3}M$, dioctyl PhenylPhosphnate, isododecyl phenylphosphate, dioctyl maleate 등의 경우 $10^{-6}{\sim}10^{-2}M$까지의 직선성 검량선을 얻을 수 있었고, 항생제, 당, 그리고 1급 아민화합물에 대한 감응선은 적게 나타났다.