• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.123-129
• /
• 1999

Initial electrochemical characteristics of $LiCoO_2$ electrode for lithium ion battery with various content of super s black as conductive material were evaluated through the charge/discharge with the potential range of 4.3V to 2.0V versus $Li^+/Li^+$. The rate of C/4 and C/2 by the 3 electrode test cell composed with an electrolytic solution of 1 mol/l $LiPF_6/EC+DEC(1:3\;by\; weight)$. Lithium was used as reference electrode. High impedance charge behavior was observed at early stage of charge. In the case of $3\%w/w$ of super s black as conductive material, the specific resistance of the high impedance releasing was $3.82\;{\Omega}\;{\cdot}\;g-LiCoCo_2$ at the current density of $0.5 mA/cm^2$, which corresponds 7 times of the specific resistance of electrode $(0.728 g-LiCoO_2)$. At second charge, the specific resistance of the high impedance releasing was 63 mn · g-Lico02, which corresponds 12eio of the specific resistance of electrode and only $1.7\%$ of that of the first charge. The first charge and discharge specific capacities at C/4 rate were 160-161 and $153\~155mAh/g-LiCoO_2$, respectively, to lead $95.4\~96.4\%$ of coulombic efficiencies and ca. $6 mAh/g-LiCoO_2$ of initial irreversible specific capacity. Specific resistance at the end of charge and rest showed low value at content of super s black between 2 and $7\%w/w$, which agreed with characteristics of irreversible specific capacity. Capacity densities were reduced by the increasing the content of conductive material. They were 447 and 431mAh/ml when 2 and $2.9\%w/w$ of super s black were used, respectively, at the rate of C/4.

• Korean Journal of Ecology and Environment
• /
• v.33 no.1 s.89
• /
• pp.31-37
• /
• 2000

For the purpose of surveying the physicochemical composition of sediment collected from Kwangyang Bay, the percentage of water loss, COD, $H_2S$, grain size and 10 heavy metals were studied at 17 sites. During the surveying period, the changes of the percentage of water loss were appeared $35.5\;{\sim}\;53.8%$. COD and $H_2S$ were showed $3.8\l{\sim}\;12.9\;mg/g$, and $0.1\;{\sim}11.4\;{\mu}g/g$, respectively, In composition of grain size on the sediment, percentages of grain sizes under $74\;{\mu}m$ were varied from 40.5% to 86.7% and above $74\;{\mu}m$ were varied from 11.5% to 43.0%. From the spatial distribution of heavy metal using contour map, we can suppose some heavy metal discharges which affect sediment of Kwangyang Bay, It was estimated that Shinpung creek, Ssang-bong creek, and draining area of sewange treatment plant were the main discharge among the heavy metal output sources. By comparison between present study and heavy metal guideline of nonpolluted sea sediment that is provided by EPA, US, it was showed that the contents of Pb and Hg were acceptable but contents of Mn, Zn, Cu, Fe, As, and Cr were higher than those of EPA guideline.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.119-129
• /
• 2005

The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.138-150
• /
• 2007

The purpose of this study was to evaluate the difference of surface roughness of composite resin according to composite resin type, polishing methods, and use of resin sealant. Two hundred rectangular specimens, sized $8{\times}3{\times}2mm$, were made of Micro-new (Bisco, Inc., Schaumburg, IL, U.S.A) and Filtek Supreme (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and divided into two groups; Micronew-M group, Filtek Supreme-S group. Specimens for each composite group were subdivided into five groups by finishing and polishing instruments used; M1 & S1(polyester strip), M2 & S2 (Sof-Lex disc), M3 & S3 (Enhance disc and polishing paste), M4 & S4(Astropol) and M5 & S5 (finishing bur), Polished groups were added letter B after the application of resin surface sealant (Biscover), eg, M1B and S1B. After specimens were stored with distilled water for 24hr, average surface roughness (Ra) was taken using a surface roughness tester. Representative specimens of each group were examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using paired t-test, ANOVA and Duncan's tests at the 0.05 probability level. The results of this study were as follows ; 1. The lowest Ra was achieved in all groups using polyester strip and the highest Ra was achieved in M5, S5 and M5B groups using finishing bur. On FE-SEM, M1 and S1 groups provided the smoothest surfaces, M5 and S5 groups were presented the roughest surfaces and voids by debonding of filler on the polished specimens. 2. There was no significant difference in Ra between Micronew and Filtek Supreme before the application of resin sealant, but Micronew was smoother than Filek Supreme after the application of resin sealant. 3. There was significant corelation between Ra of type of composite resin and polishing methods before the application of resin sealant (p=0.000), but no significant interaction between them after the application of resin sealant. On FE-SEM, most of composite resin surfaces were smooth after the application of resin sealant on the polished specimens. 4. Compared with before and after the application of resin sealant in group treated in the same composite and polishing methods, Ra of M4B and M5B was statistically lower than that of M4 and M5, and S5B was lower than that of S5, respectively (p<0.05). In conclusion, surface roughness by polishing instruments was different according to type of composite resin. Overall, polyester strip produced the smoothest surface, but finishing bur produced the roughest surface. Application of resin sealant provided the smooth surfaces in specimens polished with Enhance, Astropol and finishing bur, but not provided them in specimens polished with Sof-Lex disc.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.341-351
• /
• 2005

Ecological stream health, based on the index of biological integrity (IBI) , was evaluated at five sampling locations of Youdeung Stream during August-October 2004. For the study, we also analyzed spatial and temporal patterns of conventional water quality over tine period of 1995 ${\sim}$ 2004, using the water chemistry dataset, obtained from the Ministry of Environment, Korea. The water quality parameters used here were conductivity, total suspended solids (TSS), biochemical oxygen demand $(BOD_5)$, chemical oxygen demand $(COD_{mn})$, total nitrogen (TN), and total phosphorus (TP). The multi-metric model values averaged 27.8 in the stream and ranged 24 ${\sim}$ 32. The health condition was judged as 'Fair' to 'Poor' conditions, according to the stream health criteria of US EPA (1993). Longitudinal variation occurred from the upstream to downstream reach; largest differences in all water quality variables occurred between Site 5 and the other sites. This was mainly attributed to the impacts of wastewater treatment plants near the locations. Also, relative proportions of tolerance and omnivore species increased in downstream reaches. The model values, however, did not match the values, based on water quality parameters. We assume that this may be associated with primarily reduced water volumn during dry season in the stream along with modified physical habitat conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.508-512
• /
• 1998

The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.245-252
• /
• 2004

Experiment was carried out to find the fertilizing effects of 8 different application rates of swine compost fermented with sawdust(SCS) including Chemical fertilizer(CF) on forage yield and soil chemical characteristics of mixed pastures sown in Sep. 1993 at National Livestock Research Institute, RDA., in Suwon during low years. It was arranged in a randomized complete block design with three replicates. Dry matter yield were shown at similar among treatments except Control and $50\%$ SCS of standard amount plot. In botanical composition, the legume and weeds percentages of each treatment were increased as advancing year. The final year's legume percentage were high in line with SCS fertilizing plots($39\%{\sim}43\%$), SCS + CF plots($30\%{\sim}41\%$) and CF plot($32\%$). In productions of TDN, NE and crude protein yield, SCS or SCS($75\%$) + CF($25\%$) were nearly same comparing those of CF, respectively. Phosphate, potassium, magnesium contents and K/(Ca + Mg) except calcium contents of those SCS fertilizing plots in plant were generally high with comparing CF. Those contents were proportional according to the fertilizing amount These result indicate the possibility to substitute chemical fertilizer for SCS($75\%$, 25ton/ha) + CF, $25\%$) as manure-N 210 kg/ha, but might be considered accumulation phosphate in the soil.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.498-506
• /
• 2019

This study is based on a coating method that provides utilization value as a micronised powder for cosmetic raw materials using natural minerals buried in Bonghwa, Gyeongsangbuk-do in Korea. The mineral powder name is called Buseok, and chemical name is pumice powder. The results of a study on the efficacy of cosmetics are reported by the development of particulate powder to assess the performance of this powder. First of all, in order to coat the surface of this powder with oil, aluminum hydroxide was coated on the particulate surface and then coated with alkylsilan. In addition, it was coated with vegetable oil to prevent condensation of the powder and increase the dispersion in the oil phase. First; the particle size of pumice powder was from 10 to 50mm having porous holes on the surface of the particles. Second; The components of this powder contained $SiO_2$, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $K_2O_2$, $Na_2O$, $TiO_2$, $TiO_2$, MnO, $Cr_2O_3$, $V_2O_5$. Third: The particles of this powder have a planetary structure and are reddish-brown with porosity through SEM and TEM analysis. Fourth; the far-infrared radiation rate of this parabolic powder was $0.924{\mu}m$, and the radiative energy was $3.72{\times}102W/m^2$ and ${\mu}m$. In addition, the anion emission is 128 ION/cc, which shows that the coating remains unchanged. Based on these results, it is expected to be widely applied to basic cosmetics such as BB cream, cushion foundation, powderfect, and other color-coordinated cosmetics, sunblock cream, wash-off massage pack as an application of cosmetics. (Small and Medium Business Administration: S2601385)

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.300-311
• /
• 2006

The purpose of this study is to evaluate prospectively the effect of different bonding systems and retention grooves on the clinical performance of resin restorations in non-carious cervical lesions (NCCLs). Thirty-nine healthy adults who had at least 2 NCCLs in their premolar areas were included in this study. One hundred and fifty teeth were equally assigned to six groups: (A) Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4th generation bonding system) without retention grooves; (B) SBMP with retention grooves; (C) BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5th generation bonding system) without retention grooves; (D) BC Plus with retention grooves; (E) Adper Prompt (3M ESPE, Seefeld, Germany, 6th generation bonding system) without retention grooves; (F) Adper Prompt with retention grooves. All cavities were filled with a hybrid composite resin. Denfil (Vericom Co., Anyang, Gyeonggido, Korea) by one operator. Restorations were evaluated at baseline and at 6-month recall, according to the modified USPHS (United States Public Health Service) criteria. Additionally, clinical photographs were taken and epoxy resin replicas were made for SEM evaluation. At 6-month recall, there were some differences in the number of alpha ratings among the experimental groups. But, despite the differences in the number of alpha ratings, there was no significant difference among the 3 adhesive systems (p < 0.05). There was also no significant difference between the groups with or without mechanical retention (p < 0.05). Follow-ups for longer periods than 6 months are needed to verify the clinical performance of different bonding systems and retention grooves.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.157-157
• /
• 2003

우리나라에서 생산되는 감귤은 지리적 기후 조건으로 내한성이 강한 만다린계 온주밀감이 주종을 이루나 최근 과잉생산으로 인한 가격하락과 수입자유화에 따른 대처의 일환으로 경쟁력이 높은 품종을 장려 보급하고 있다. 감귤의 국내 연간 생산량은 56만 톤으로 과일 전체 생산량의 약 30%를 차지하며 과실의 약 20%가 과피로서 그 일부가 한약재로 쓰이나 대부분이 버려지고 있다. 감귤의 과피에는 carotenoids, bioflavonoids, pectin 및 terpenes가 풍부하게 함유되어 있으며, 천연에서 발견되고 있는 약 300여종의 carotenoids계 색소 중 115종이 감귤에 존재한다. 감귤 과피의 주요 carotenoids로는 비타민 A의 역할을 하는 $\beta$-carotene과 cryptoxanthin을 비롯한 $\beta$-citraurin이며 천연 착색제로 활용되고 있다. 또, 주요 bioflavonoids로는 모세혈관의 수축을 촉진시켜 고혈압 예방과 이로 인한 각종 질환을 방지하는 작용을 가진 hesperidin과 혈액내 LDL 콜레스테롤의 양을 줄이는 작용이 알려진 naringin이 있다. 그 외의 감귤 flavonoids도 항산화작용, antimutagen 활성, 항암, 항알레르기 및 항바이러스 효과가 알려져 있다. 밀감 과피의 bioflavonoids는 약 60여종이 분리되어 그 구조가 밝혀져 있으나 90% 이상이 hesperidin이다. 또 과피유에는 $\delta$-limonene을 주성분으로 하는 휘발성 향미성분이 함유되어 있어 향미 개선제로서의 활용이 기대되고 있다. 본 연구는 최근 식생활의 서구화로 쌀 위주의 식생활에 많은 변화를 가져와 쌀 소비량은 해마다 줄어들고 있는 반면 기능성을 가미한 쌀의 소비가 늘고 있음을 감안하여, 우리나라 제주도에서 생산되고 있는 감귤 과피의 물 균질액을 쌀에 코팅하여 아름다운 색상과 기능성을 지닌 유색미를 제조함과 동시에 그 취반 특성을 조사하였다. 그 결과 유색미의 색상은 진노랑(L＊; 63.6, a＊; -7.87, b＊; 46.35)으로 취반 후에도 유사한 색상을 나타내었다. Total carotenoids는 감귤과피에서는 10.74mg%, 과피의 물 균질액에는 0.46mg%이었으며 유색미에는 0.l2mg%, 유색미 취반에는 0.05mg%를 나타내었다. Hesperidin은 과피, 물 균질액, 유색미 및 유색미 취반에서 각각 2173.l2mg%, 108.65mg%, 21.73mg% 및 8.67mg%이었으며, naringin은 각각 1468.40mg%, 73.38mg%, 14.62mg% 및 5.87mg%를 나타내었다. 감귤과피의 유리아미노산은 asparagine이 94.22mg%로 가장 높았으며, methionine이 24.88mg%, alanine이 19.64mg%, ${\gamma}$ -aminoisobutylic acid가 15.37mg%로 이들 4종의 아미노산이 전체 유리아미노산함량의 70%를 나타내었다. 유색미 취반에는 백미 취반에 비하여 총 유리아미노산의 함량이 15%정도 증가되었으며, 그 중에서 glutamic acid는 2.5 배가 증가되었다. 감귤과피의 주요 무기질은 K(652.60mg%)와 Ca(222.50mg%)로 전체 무기질 함량의 86%를 차지하였으며 유색미 취반은 백미 취반에 비하여 K는 2.3배, Mn는 76%, Ca, P, Mg은 16~26%, Fe는 13%가 각각 증가되었다. 취반의 경도, 점착성 및 깨짐성은 유색미 취반과 백미 취반간에 차이가 없으나 응집성과 탄력성은 유색미 취반에서 높았다. 색상에 대한 기호도, 구수한 맛 및 종합적인 기호도는 유색미 취반에서 높았으며 단맛, 쓴맛은 백미 취반과 차이를 보이지 않았다.