• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1174-1179
• /
• 2001

상온용 NTC 서미스터로는 주로 Mn-Co-Ni 산화물계가 사용된다. 본 연구에서는 Mn-Co-Ni 산화물게 분말을 이용하여 상온에서 가압성형하여 125$0^{\circ}C$에서 3시간 동안 소결한 후, 100$0^{\circ}C$에서 3시간 유지하여 소결체를 제작하였다. 다양한 조성으로 제조된 서미스터의 전기적 특성을 평가한 결과, MCN622(Mn$_3$O$_4$60wt%, 20wt%, NiO 20wt%)는 가장 낮은 비저항과 상대적으로 높은 B 정수를 나타내었고, MCN721(Mn$_3$O$_4$70wt%, Co$_3$O$_4$20wt%, NiO 10 wt%)는 다는 조성들에 비해 현저히 높은 비저항값을 나타내었다. 또한, 각 조성들의 경시변화는 $\pm$2%이내로서 비교적 안정한 특성을 나타냈다.

• 한국대기환경학회지
• /
• 제21권2호
• /
• pp.161-168
• /
• 2005

The catalytic oxidation of toluene in low concentration was investigated over manganese oxide/$\gamma$-A1$_{2}$O$_{3}$ catalysts. As increased manganese loading, the conversion of toluene increased at a lower temperature. The 18.2wt$\%$ Mn/$\gamma$-Al$_{2}$O$_{3}$ appeared to be the most active catalyst. XRD results indicated that most of the catalysts exist as MnO$_{2}$ and Mn$_{2}$O$_{3}$ crystalline phase. After the reaction, the used and the fresh catalysts were characterized by XPS. For the used catalyst, a prominent feature has increased. TPR profiles of 18.2 wt$\%$ Mn/$\gamma$-Al$_{2}$O$_{3}$ changed significantly as the manganese loading increased at a lower temperature.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1067-1072
• /
• 2014

In this study, we report a new approach for $Mn_3O_4$-graphene nanocomposite by ex situ method. This nanocomposite shows two-dimensional aggregation of nanoparticle, and doping effect by decorated manganese oxide ($Mn_3O_4$), as well. The graphene film was made through micromechanical cleavage of graphite on the $SiO_2/Si$ wafer. Manganese oxide ($Mn_3O_4$) nanoparticle with uniform cubic shape and size (about $5.47{\pm}0.61$ nm sized) was synthesized through the thermal decomposition of manganese(II) acetate, in the presence of oleic acid and oleylamine. The nanocomposite was obtained by self-assembly of nanoparticles on graphene film, using hydrophobic interaction. After heat treatment, the decorated nanoparticles have island structure, with one-layer thickness by two-dimensional aggregations of particles, to minimize the surface potential of each particle. The doping effect of $Mn_3O_4$ nanoparticle was investigated with Raman spectra. Given the upshift in positions of G and 2D in raman peaks, we suggest that $Mn_3O_4$ nanoparticles induce p-doping of graphene film.

• Applied Biological Chemistry
• /
• 제41권1호
• /
• pp.89-94
• /
• 1998

크롬의 산화는 자연계에 존재하는 여러 가지의 Mn-oxide에 의해 일어나며 산화과정에 존재하는 크롬 화학종들은 반응계 내에서 흡착, 침전 현상을 유발할 수 있고 결과적으로 산화반응을 조절할 수 있을 것이다. 본 연구에서는 birnessite와 pyrolusite에 의한 크롬의 산화에서 크롬 화학종이 반응에 미치는 영향을 조사하였다 Mn-oxide는 그 종류에 따라 크롬 산화력에서 큰 차이를 보였으며 용액의 pH와 초기 3가 크롬 첨가량도 산화반응에 큰 영향을 미쳤다. 동일 표면적당의 산화력을 비교하면 pyrolusite의 산화력은 birnessite의 5% 정도에 불과하였다. 이는 pyrolusite 의 결정도에 크게 기인하며 또한 양으로 하전된 표면 특성 때문에 반응물인 3가 크롬의 접근이 어렵고 반응산물인 6가 크롬의 흡착 등에 기인하는 것으로 보인다. Birnessite에 의한 산화반응에서 pH 3에서는 oxide의 표면에서의 크롬 화학종들의 흡착이나 침전 현상은 발견되지 않았으며 pyrolusite의 경우 일부 6가 크롬의 흡착이 나타났으나 침전현상은 발견되지 않았다. 따라서 pH 3의 경우 산화반응은 Mn-oxide의 특성에 따라 결정된다. Mn-oxide에 의한 크롬의 산화는 열역학적으로 용액의 pH가 높아질수록 더 진행되어야 한다. Birnessite의 경우 pH 5에서 오히려 산화반응이 현저히 저해되었는데 이는 birnessite의 표면에 형성되는 3가 크롬의 침전이 반응표면을 감소시킴으로써 나타나는 현상으로 판단된다. Pyrolusite의 경우 pH 3보다 pH 5에서 크롬의 산화는 더 일어나나 초기 3가 크롬의 첨가량이 많아지면서 반응이 억제된다. 일부 3가와 6가 크롬의 흡착이 일어나나 이 경우도 역시 pyrolusite의 표면에 형성되는 3가 크롬의 침전이 반응을 조절하는 주 요인으로 생각된다. Mn-oxide의 표면에 형성되는 3가 크롬의 침전은 산화가 일어날 수 있는 반응표면을 감소시키고 또한 반응물의 농도를 낮춤으로써 용액의 pH가 높고 3가 크롬의 첨가량이 많아질 때 크롬의 산화반응을 억제하는 주 요인이 되는 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.360-363
• /
• 2006

We synthesized $(La,\;Sr)MnO_{3+{\delta}$ as a cathode for SOFC by glycine nitrate process(GNP) and knew the different properties of $(La_{1-x}Sr_x)MnO_3$ by using nitrate solution and oxide solution as starting material. In case of using nitrate solution as a starting material, main crystal phase peak of $LaMnO_3$ increased as Sr content added up and a peak of $Sr_2MnO_4\;and\;La_2O_3$ was showed as a secondary phase. We added Mn excess to control a crystal phase. In this case, the electrical conductivity had a high value 210.3S/cm at $700^{\circ}C$ On the other side, when we used oxide solution as a starting material, we found main crystal phase of $LnMnO_3$ to increase as Sr content added up and a peak of $La_2O_3$ as a secondary phase. Similary, we added Mn excess to control a crystal phase in this case. We knew $(La,\;Sr)MnO_3$ powder to sinter well and the electrical conductivity of the sintered body at $1200^{\circ}C$ for 4hrs was 152.7s/cm at $700^{\circ}C$. The sintered $(La,\;Sr)MnO_3$ powder at $1000^{\circ}C$ for 4hrs got the deoxidization peak, depending on the temperature md in case of using nitrate solution as a start ing material the deoxidization peak was showed at $450^{\circ}C$ which is lower than used a oxide solution as a starting material. As a result, when $(La,\;Sr)MnO_3$ powder was synthesized to add Mn excess and to use nitrate solution as a starting material, we found it to have the higher deoxidization property and considered it as a cathode for m properly. And we found it to have different electrical conduct ivity the synthesized $(La,\;Sr)MnO_3$ powder by using different start ing materials like nitrate solution and oxide solution which influence a sintering density and crystal phase.

• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.52-57
• /
• 2007

We synthesized $(La_{1-x}Sr_x)MnO_3$ as a cathode for SOFC by glycine nitrate process (GNP) and knew the different properties of $(La_{1-x}Sr_x)MnO_3$ by using nitrate solution and oxide solution as a starting material. In case of using nitrate solution as a starting material, main crystal phase peak of $LaMnO_3$ increased as Sr content added up and a peak of $Sr_2MnO_4\;and\;La_2O_3$ was showed as a secondary phase. We added Mn excess to control a crystal phase. In this case, the electrical conductivity had a high value 210.3 S/cm at $700^{\circ}C$. On the other side, when we used oxide solution as a starting material, we found main crystal phase of $LaMnO_3$ to increase as Sr content added up and a peak of $La_2O_3$ as a secondary phase. Similary, we added Mn excess to control a crystal phase in this case. We knew $(La,Sr)MnO_3$ powder to sinter well and the electrical conductivity of the sintered body at $1200^{\circ}C$ for 4 h was 152.7 S/cm at $700^{\circ}C$. The sintered $(La,Sr)MnO_3$ powder at $1000^{\circ}C$ for 4 h got the deoxidization peak, depending on the temperature and in case of using nitrate solution as a starting material, the deoxidization peak was showed at $450^{\circ}C$ which is lower than used a oxide solution as a starting material. As a result, when $(La,Sr)MnO_3$ powder was synthesized to add Mn excess and to use nitrate solution as a starting material, we found it to have the higher deoxidization property and considered it as a cathode for SOFC properly. And we found it to have different electrical conductivity the synthesized $(La,Sr)MnO_3$ powder by using different starting materials like nitrate solution and oxide solution which influence a sintering density and crystal phase.

• Journal of Electrochemical Science and Technology
• /
• 제2권3호
• /
• pp.180-185
• /
• 2011

The layered lithium-manganese oxide ($Li_2MnO_3$) as a cathode material of lithium ion secondary batteries was prepared and characterized the physico-chemical and electrochemical properties. The morphological and structural changes of MnO(OH) and $Li_2MnO_3$ are closely connected to the changes of electrochemical properties. The crystallinity of $Li_2MnO_3$ is enhanced as the annealing temperature increase, but its capacity is reduced due to the easier structural changes of less crystalline $Li_2MnO_3$ than highly crystalline one. Moreover, the addition of buffer material such as MnO(OH) into cathode causes to reduce the morphological and structural changes of layered $Li_2MnO_3$ and increase the discharge capacity and cycleability.

• 한국환경과학회지
• /
• 제14권4호
• /
• pp.427-433
• /
• 2005

Activity of manganese oxide supported on ${\nu}-Al_2O_3$ was increased when cerium was added. Also, cerium-added manganese oxide on ${\nu}-Al_2O_3$ was more effective in oxidation of toluene than that without cerium. XRD result, it was observed that $MnO_2+CeO_2$ crystalline phases were present in the samples. For the used catalyst, a prominent feature has increased by XPS. TPR/TPO profiles of cerium-added manganese oxide on ${\nu}-Al_2O_3$ changed significantly increased at a lower temperature. The activity of $18.2 wt{\%}\;Mn+ 10.0 wt{\%}\;Ce/{\nu}-Al_2O_3$ increased at a lower temperature. The cerium added on the manganese catalysts has effects on the oxidation of toluene.

• 한국자기학회지
• /
• 제16권2호
• /
• pp.136-139
• /
• 2006

자기터널접합은 일반적으로 $250^{\circ}C$ 이상의 온도에서 터널자기저항비의 저하가 발생하는데 이는 반강자성체로 사용된 IrMn 중 Mn이 강자성체인 CoFe 및 터널배리어로의 내부확산에 기인한다. 자기터널접합의 열적 안정성을 향상시키기 위하여 나노산화층을 삽입하여 Mn의 확산을 제어하였다. CoNbZr 4/CoFe 10/IrMn 7.5/CoFe 3/터널배리어/CoFe 3/CoNbZr 2(nm)와 같은 자기터널접합을 기본구조로 하여 각각의 층에 나노산화층을 삽입하여 열적안정성 및 전자기적 특성을 비교 분석 하였다. 나노산화층의 삽입에 의해 터널자기저항비, 자기터널접합의 표면 평활도 및 열적안정성이 향상되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.289-289
• /
• 2007

Spinel structured $LiMn_2O_4$ is more economic and environmental friendly to be used as commercial active material for secondary battery compared to Co-oxide material active material, but spinel structure of $LiMn_2O_4$ is unstable and its capacitance decreases with increase of cycle. Therefore, the purpose of our sturdy is to improve the stability of $LiMn_2O_4$ spinel structure and increase its capacitance by using substituents or dopants. $LiMn_2O_4$ powder was synthesized by charging substituents or dopants mole fractions, and temperatures. Crystal state, structure and specific surface area of the synthesized powder were measured and also characteried electrochemically by measuring its impedance, charge-discharge capacitance and etc.