• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.209-216
• /
• 2007

The present study investigated anti-oxidative and anti-inflammatory activity of glycoprotein isolated from Morus Indica Linne (MIL glycoprotein). We found that MIL glycoprotein has a molecular weight of 32 kD and consists of carbohydrate (40.03%) and protein (59.97%), and that it has a strong scavenging activity against 1,1-diphenyl-2-picrylhydrazyl (DPPH), hydroxyl radical $({\cdot}OH)$, and superoxide anion $(O_2{\cdot}\;^-)$ radicals. In addition, MIL glycoprotein had a stable character and an optimal DPPH radical scavenging activity in the alkaline and neutral pH solution, and up to at 105. However, the results indicated that it has a minimal scavenging activity in the metal ionic solution ($Ca^{2+}$, $Mn^{2+}$, and $Mg^{2+}$) in the presence of EDTA. In addition, we further investigated whether MIL glycoprotein scavenges oxygen radicals and blocks inflammation-related signals in the bisphenol A (BPA)-stimulated Raw 264.7 cells. The results in this study showed that it has a character to scavenge the productions of reactive oxygen species (ROS) and nitric oxide (NO) dose-dependently. Also it blocked the activities of inflammation-related signals such as nuclear factor-kappa B ($NF-{\kappa}B$) and inducible nitric oxide synthase (iNOS). For example, it had an inhibitory effect on the activation of $NF-{\kappa}B$ (p50) and iNOS proteins at 200 ${\mu}g/mL$ MIL glycoprotein. Here, we speculate that MIL glycoprotein is one of natural antioxidants and of modulators of the BPA-induced inflammation.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.67-74
• /
• 2020

In this study, various constituents and biological activities of different parts of asparagus were analyzed and compared. The Ca content was high in the leaves, K was significantly high in the top 25 cm of the spear, and Fe and Na were significantly high in the roots. The ascorbic acid, rutin, total polyphenol, and total flavonoid contents were high in the leaves, and the asparagine and glutathione contents were significantly high in the top 25 cm of the spear and roots, respectively. The bottom 5 cm of the spear had the highest saponin content compared with all other parts. The DPPH and ABTS radical scavenging activities were the highest in the leaves. The bottom 5 cm of the spear had the highest α-amylase inhibitory activity, whereas the stem showed the highest anti-inflammatory activity. These results suggest that the usually inedible parts of asparagus may be highly valuable as high-quality functional components owing to their antioxidative and anti-inflammatory activities.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2003

For the development of low temperature anode-supported planar solid oxide fuel cell, the planar anode supports with the thickness of 0.8 to 1 mm and the area of 25, 100 and $150\;cm^2$ were fabricated by the tape casting method. The strength, porosity, gas permeability and electrical conductivity of the planar anode support were measured. The porosity of anode supports sintered at $1400^{\circ}C$ and then reduced in$H_2$ atmosphere was increased from $45.8\%\;to\;53.9\%$. The electrical conductivity of the anode support was $900 S/cm\;at\; 850^{\circ}C$ and its gas permeability was 6l/min at 1 atm in air atmosphere. The electrolyte layer and cathode layer were fabricated by slurry dip coating method and then had examined the thickness of $10{\mu}m$ and the gas permeability of 2.5 ml/min at 3 atm in air atmosphere. As preliminary experiment, cathode multi-layered structure consists of LSM-YSZ/LSM/LSCF. At single cell test using the electrolyte layer with thickness of 20 to $30{\mu}m$, we achieved $300\;mA/cm^2$ and 0.6V at $750^{\circ}C$

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.318-324
• /
• 2015

Purpose: This study compared shear bond strengths of five self-adhesive cements with phosphate monomer to zirconium oxide ceramic with and without airborn particle abrasion. Materials and methods: One hundred zirconia samples were air-abraded ($50{\mu}mAl_2O_3$). One hundred composite resin cylinders were fabricated. Composite cylinders were bonded to the zirconia samples with either Permacem 2.0 (P), $Clearfil^{TM}$ SA Luting (C), $Multilink^{(R)}$ Speed (M), $RelyX^{TM}$ U200 Automix (R), G-Cem $LinkAce^{TM}$ (G). All bonded specimens were stored in distilled water ($37^{\circ}C$) for 24 h and half of them were additionally aged by thermocycling ($5^{\circ}C$, $55^{\circ}C$, 5,000 times). The bonded specimens were loaded in shear force until fracture (1 mm/min) by using Universal Testing Machine (Model 4201, Instron Co, Canton, MA, USA). The failure sites were inspected under field-emission scanning electron microscopy. The data was analyzed with ANOVA, Tukey HSD post-hoc test and paired samples t-test ($\alpha$=.05). Results: Before and after thermocycling, $Multilink^{(R)}$ Speed (M) revealed higher shear-bond strength than the other cements. G-Cem $LinkAce^{TM}$ (G) showed significantly lower bond strengths after thermocycling than before treatment (P<.05), but the other groups were not significantly different (P>.05). Conclusion: Most self-adhesive cements with phosphate monomer showed high shear bond strength with zirconia ceramic and weren't influenced by thermocycling, so they seem to valuable to zirconia ceramic bonding.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.8-15
• /
• 2010

Purpose: The purpose of this study was to evaluate the effect of various methods of dentin bonding agent application and air abrasion pretreatment on microtensile bond strength between dentin and resin, using a self-etching adhesive system. Material and methods: Thirty freshly extracted human molars were obtained and divided into 6 groups of 5 teeth. A 2-step self etching adhesive system (Clearfil SE Bond) was used for all groups. The control specimens were prepared using a direct immediate bonding technique. The delayed dentin sealing specimens were prepared using an indirect approach without dentin prebonding. The immediate dentin sealing specimens were prepared using dentin prebonding immediately following preparation. Immediate dentin sealing teeth and delayed dentin sealing teeth had provisional restorations using Fermit for two weeks. Then all specimens of each group were divided into two groups of three, depending on air abrasion pretreatment. Composite "crowns" were incrementally built on and specimens were stored in water for 24 hours. All teeth were prepared for a microtensile bond strength test. Bond strength data were analyzed with a one-way ANOVA test, and post hoc comparison was done using the Scheffe's test. Results: The mean microtensile bond strengths of all groups were not statistically different from each other. Conclusion: When preparing teeth for indirect restorations, IDS and DDS with Clearfil SE bond, have no difference on the microtensile bond strength between dentin and resin. Air abrasion pretreatment did not affect the microtensile bond strength when using IDS and DDS with Clearfil SE bond.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.513-520
• /
• 2017

This study was performed to provide basic data of 'Kangilok'. The objective of this study was to investigate worth of 4 parts of maize hybrid for grain, 'Kangilok' for functional foods. The 4 parts are kernels, dehulled kernels, skin of kernels and cobs of 'Kangilok'. We evaluated moisture, crude ash, crude lipid, crude protein, crude fiber and mineral content of 'Kangilok'. The moisture of kernels, dehulled kernels, skin of kernels and cobs of 'Kangilok' were 11.27%, 12.40%, 9.45%, 8.85% and the crude ash were 1.26%, 0.73%, 3.19%, 1.42%. Each of the crude lipid were 3.84%, 2.69%, 8.59%, 0.46% and the crude protein were 9.40%, 9.96%, 12.10%, 2.80%. The crude fiber of kernels, dehulled kernels, skin of kernels and cobs of 'Kangilok' were 2.24%, 0.92%, 7.07%, and 33.51%. Among the mineral contents, Ca and K content of cobs were highest by 4.84 mg/100 g, 114.33 mg/100 g and Fe, Mn contents of skin of kernels were highest by 5.30 mg/100 g, 2.64 mg/100 g. Mg content of kernels was the highest by 27.42 mg/100 g. P content of kernels, dehulled kernels, skin of kernels and cobs were 1.20%, 0.96%, 2.41%, and 0.19%. It was performed test on anti-oxidative, anti-inflammatory activities of 60% ethanol extract from 4 parts of Kangilok. The anti-oxidative effect was measured by DPPH and ABTS radical scavenging activity. As a results, DPPH radical scavenging activity (10 mg/mL) was 72.59%~93.05% and ABTS radical scavenging activity (10 mg/mL) was 48.17%~79.88%. The anti-inflammatory effect was measured by ability to inhibit production nitric oxide (NO) in RAW264.7 cell. As a result, all the extract of 4 parts were showed significantly inhibitory effect on NO production. Carotenoid contents quantified by using HPLC. ${\beta}$-Carotene of carotenoid was not analyzed in all the sample. Lutein and zeaxantin ware analyzed in kernels and skin of kernels.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.