• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.497-504
• /
• 1993

Effects of $Ta_2O_5,ZrO_2$ and $SiO_2$ addition on magnetic properties of 0.02wt%$Bi_2O_3$ and 0 . 0 5 wt%$CaCO_3$ doped Mn-Zn ferrites(58.5mol% $Fe_2O_3$, 25.5 mol% ZnO) were investigated. E:lectrlcal resistivity and magnetic properties such as the initial permeability($\mu_i$), loss factor(tan$\delta$), coercive force Hc(m0c) were measured. With lncreasing $Ta_2O_5$ and $ZrO_2$ addition, the following effects were observed: I ) Decreasing of the average grain size; 2) lncreasing of the electrical resistivity and initial permeability; 3) Ilecreasmg of loss factor values. (very low loss esprcially at high frequency region) ; 4 ) Fine and uniform microsrructures were obtamed at O.lwt% nddecl samples. In case of $SiO_2$ addition, anomalous grain growth and degradation of magnetic properties were observed. The obtained maximum initial permeability value was 6260 at IOkHz. $25^{\circ}C$ from 0.02wt%$Bi_2O_3$. 0.05wt%$CaCO_3$, 0.lwt%$Ta_2O_5$ added sample, the corresponded relative loss factor (tan$\delta /\mu_i$)for the sample was $4.2 \times 10^{-6}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.23-26
• /
• 2003

The flat transformer, typically, has a number of parallel single turn secondary windings. Each secondary winding is coupled to the same primary winding. Therefore, the current in each secondary winding is equal to the ampere-turns in the primary winding, and to each other. These characteristics are particularly advantageous where parallel rectifiers are used. The windings share the current equally, with no need for ballast resistors or other added components. In this study, the ferrite magnetic core samples of Mn-Zn system for the Flat transformer are manufactured and the electrical and magnetic characteristics of its tested. The density of sample FO2-2 sintered at $1350^{\circ}C$ is $4.00kg/m^3$, which shows the good microstructural state. The initial permeability and saturation flux density of FO2 at room temperature is 2700 and 510mT, individually. The power loss of FO2 samples at 250kHz have been ranged $350kW/m^3$ to $80kW/m^3$ with temperature. And the minimum power loss of sample FO2-2 showed at $70^{\circ}C$, which property seems very positive to apply for a flat transformer.

• Journal of the Korean Ceramic Society
• /
• v.32 no.5
• /
• pp.549-558
• /
• 1995

Mn-Zn ferrite granules were prepared by spray drying of the slurry containing different kinds and concentration of binders at various spray drying temperatures and atomizing pressures. The characteristics of the spraydried granules were analyzed according to the processing variables of spray drying and the slurries containing different solid loading and kinds and concentration of binders. Typical shape of the spray dried granules was spherical. The granules spray dried at 15$0^{\circ}C$ were more spherical and containing lower hollow percentage than any other granules prepared at higher temperature. The granules prepared at higher atomizing pressures were more spherical and become smaller in size. The granules prepared using slurry containing higher solid loading were larger in size and less defective in shape. As increasing the concentration of binder the number of donut-shaped granules was increased and the size distribution become broader. The granules prepared using the slurry containing PVA 205 were more spherical than those containing PVA 217 and PVA 117. As the amount of granules which were donut-shaped or dimpled increased the compaction response were less effective. The hollows were not fractured completely even at hight pressures and remained after sintering.

• Journal of the Korean Magnetics Society
• /
• v.22 no.6
• /
• pp.216-220
• /
• 2012

Magnetic properties of composite materials consisting of polymer filled with ferromagnetic powders (MnZn ferrite, Fe-Si alloy) were investigated in this study. The volume fraction of magnetic powders as fillers was varied from 70 % to 95 %. This paper presents the fabrication method of polymer magnetic composites in an effort to produce the 0-3 types of MnZn ferrite and FeSi as fillers with a proper complex permeability through the optimization of some experimental parameters. The polymer matrix composites were prepared by mixing the crushed ferrites and flaky FeSi powders homogenously with low-density resins (EPDM, epoxy). The relationships among the manufacturing technology of these materials, their filler volume fraction, as well as their complex permeability were measured and analyzed.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.106-111
• /
• 2000

The magnetic thin films can be prepared without vacuum process and under the low temperature (<100 $^{\circ}C$) by ferrite plating. We have performed ferrite plating of M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$(x=0.00~0.08) films and N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$(x=0.00~0.15) films on cover glass at the substrate temperature 90 $^{\circ}C$. The crystal structure of the samples has been identified as a single phase of polycrystal spinel structure by x-ray diffraction technique. The lattice constant in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films increases but in the N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$films decrease with the composition parameter, x. The saturation magnetization in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films does not greatly change, in agreement with observations on bulk samples.k samples.k samples.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.60-64
• /
• 2003

유도결합형 플라즈마를 이용하는 무전극 형광램프는 소프트 페라이트를 이용하여 방전을 유도하며, 페라이트의 주파수나 온도 특성이 안정하면, 공심 솔레노이드코일을 사용하였을 때보다 램프전력이 더 효율적이 된다. 페라이트의 형상과 코일의 권선수는 코일의 임피던스, 인덕턴스, Q-factor에 직접적으로 영향을 주며, 감은 위치에 변화에 의해서도 그 값들이 변할 수 있다. 따라서, 본 논문에서는 전구형 무전극 형광램프의 방전에 중요한 역할을 하는 안테나에 대한 실험 결과로서 Mn-Zn 페라이트를 이용한 솔레노이드 코일에 주파수와 코일의 권선수를 변화시켜 코일의 전기적 특성을 조사하였다. 임피던스 특성은 주파수가 증가함에 따라 증가하였으며, 코일의 권선수가 14회일 때, 기존 램프의 안테나와 비슷한 $324[\Omega]$을 나타내었으나, Q-factor는 코일의 권선수가 증가할 수 록 감소하였으며, 기존 램프의 안테나와 많은 차이를 보였다.

• Electrical & Electronic Materials
• /
• v.3 no.2
• /
• pp.123-130
• /
• 1990

본 논문은 페라이트의 온도특성을 측정하기 위한 다중측정시스템의 설계에 관하여 연구한 것이다. 본 시스템은 전기로의 온도를 제어하기 위한 열전대 콘트롤러, 릴레이 동작을 제어하기 위한 릴레이 콘트롤러 및 릴레이를 구동시키기 위한 스윗칭부, 그리고 GPIB를 이용한 LCR메터 제어부와 이들을 마이크로 컴퓨터와 통신하기 버스 라인으로 구성하였다. 열전대 콘트롤러와 릴레이 콘트롤러는 8255A(Intel LSI)를 주로 이용하여 설계하였으며 릴레이로는 고주파용 릴레이를 사용하여 스윗칭 트랜지스터로 구동시키는 방법을 택하였다. 그리고 LCR-메터에는 GPIB(AD50488)보드를 사용하였다. 측정시료로서는 복합첨가제방식에 의하여 제작된 Mn-Zn-Fe계 페라이트의 시편을 사용하였으며 시료의 특성측정은 자체 제작한 자동계측시스템을 이용하여 분석하였다. 측정결과 온도보상점 T$_{o}$ 와 큐리온도 T$_{c}$ 바로 아래에서 투자율의 급격한 변화를 확인할 수 있었다. 그리고 특성의 계측에 있어서 일관성이 있고 정확한 자료를 얻을 수 있었으며 따라서 본 시스템이 인터페이스와 컴퓨터 사이의 연결성이 좋은 자동다중계측시스템으로 활용 할 수 있음을 확인한다.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.83-86
• /
• 2015

Nowadays the weapon systems are employed air bursting munition (ABM) as smart programmable 40 mm shells which have been developed in order to hit the target with programmed munition that can be air burst after a set distance in the battlefield. In order to improve the accuracy of such a bursting time, by measuring the speed of the munition from the barrel, weapon systems calculate the exact time of flight to the target and then the time information must be inputted to the munition. In this study, we introduce a device capable of detecting a shot at K4 40 mm automatic grenade. The shot is composed of a rotating copper band to convert linear motion into rotary motion when it passes through the barrel, the steel section is exert the effect of fragment and aluminum section to give fuze information. The aluminum section was used to detect munition using eddy current method. To measure muzzle velocity by means of non-contact method, two eddy current probes separated 10 cm was employed. Time interval between two eddy current probe detection times was used as muzzle velocity. The eddy current probe was fabricated U-shape Mn-Zn ferrite core with enamelled copper wire, and 200 kHz alternating current was used to detect inductance change. Measured muzzle velocity using the developed sensor was compared to the Doppler radar system. The difference was smaller than 1%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.552-559
• /
• 2004

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved quality of the lighting space. Above all, the advantage of ring-shaped electrodeless fluorescent lamp is the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. The ring-shaped electrodeless lamp is intended as a high efficiency replacement for the incandescent reflector lamp in many applications. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps and last up to 60,000 hours. In this paper, maxwell 3D finite element analysis program(Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250 KHz and some specific conditions. The optical characteristics were measured luminance and a temperature and an optical spectrum distribution for 10 min in a one minute interval at the same time. With a goal of finding alternative materials, we show measurement results of electrical characteristics of a ring-shaped electrodeless fluorescent lamp as a function of frequency and the number of coil turns using a highly permeable($\mu$$_{r}$(equation omitted) 2,000) Mn-Zn ferrite. These results are compared with those of conventional ring-shaped electrodeless fluorescent lamp. It is found that the resistance, inductance and impedance are increased while the quality factor decreases as frequency increases.s.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.54-60
• /
• 2001

A newly designed inductive micro displacement detecting system is presented. The proposed inductive system consists of driving coils, position-detecting coils, cores, and closed-loop formed magnetic blocks. The cores and magnetic blocks are made of Mn-Zn ferrite. When AC sine wave is applied to the driving coils, the time derivative flux is generated within the system, and then induced voltages arise in the position-detecting coils according to the core\`s position. Putting the cores to be moved proportionally to the input displacement, the induced voltage is proportional to input displacement. The parameters that affect the system characteristics are turn ratio, air-gap size, excitation frequency, overlap area, load resistance, capacitance effect, and so forth. Based on the experimental results, the system parameters are selected in such a way as to have high sensitivity ad stable responses. The sensitivity of the proposed inductive displacement-detecting system is greater than 2800mV.V-1mm-1 and the linearity error is below $\pm$0.10% in the range of $\pm$200㎛.