• 한국주조공학회지
• /
• 제17권2호
• /
• pp.151-157
• /
• 1997

다섯 조성의 서로 다른 Mo, Ni 및 Mn함량을 지닌 3 mass% C-20 mass% Cr 공정조성의 백주철을 질소분위기하에서, 1173, 1273 및 1373 $^{\circ}K$의 온도로 3.6, 7.2, 14.4 및 28.8 ks동안 불안정화열처리를 행한 후 공냉시켜 잔류오스테나이트를 측정한 결과 합금원소함량, 불안정화열처리조건 및 $V{\Upsilon}$사이에 다음과 같은 관계를 얻었다. 즉 Mo, Ni 및 Mn을 첨가한 결과, 주방상태에서 79.89${\sim}$91.65 vol.%범위의 $V{\Upsilon}$가 얻어 졌으며 퍼얼라이트는 전혀 생성되지 않았다. 1173 $^{\circ}K$에서 불안정화열처리를 한 경우에는 무수히 작은 이차탄화물이 석출하였으나 온도가 높아 질수록 그 수는 점차 감소하여 1373 $^{\circ}K$에서는 거의 관찰되지 않았다. 1173 및 1373 $^{\circ}K$에서 불안정화열처리를 한 경우, 불안정화열처리시간의 증가에 따른 $V{\Upsilon}$의 변화는 미미하였으나 1273 $^{\circ}K$의 경우에는 감소하였다. 또한 Mo, Ni 및 Mn의 첨가량이 많아짐에 따라 $V{\Upsilon}$는 증가하였으며 이 두 함수사이의 관계식을 정립시키기 위하여 P인자를 도입하였다.

• Journal of Plant Biology
• /
• 제16권3_4호
• /
• pp.40-44
• /
• 1973

Hawkeye(Fe-chlorosis resistant) and PI 54619-5-1(Fe-chlorosis sensitive) soybeans were grown with and without DPTA(diethylene triamine pentaacetic acid) in Yolo loam soil. The major purpose of the study was to compare leaf-stem distribution of microelements for different treatments which increase concentrations of microelements in plants to evaluate the role of the chelating agent in increasing translocation of the microelements. Plant responses and yields were recorded and Fe, Mn, Zn, Cu, Al, Co, N, Sn, Pb and Mo contents of leaves and stems were determined by emission spectrography. Sulfur(soil pH4) increased leaf concentrations of Mn, Zn, Cu, CO, Ni, Sn and Pb. DTPA, particularly at 50ppm in soil, increased leaf concentrations of Fe, Mn, Zn, Cu, Co, Ni and Mo. It increased Ti in leaves for the PI 54619-5-1 soybeans only. DTPA increased the ratios of the concentration in leaves to that in stems for Fe, Zn, Cu, Al, Ti, CO, Ni and Mo. Sulfur which increased the microelement concentration in both leaves and stems did not have this effect. DTPA increased the ratio at soil pH 6 and 8.5 in leaves to that in stems of the bush bean plants for Fe, Zn, Cu, Ni, but to a lesser extent in bush beans than in soybeans. PI 54619-5-1 soybeans tended to contain less of most of the metals than did Hawkeye soybeans.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.411-420
• /
• 2020

Undesirable interfacial reactions between the cathode and sulfide electrolyte deteriorate the electrochemical performance of all-solid-state cells based on sulfides, presenting a major challenge. Surface modification of cathodes using stable materials has been used as a method for reducing interfacial reactions. In this work, a precursor-based surface modification method using Zr and Mo was applied to a LiNi_0.6Co_0.2Mn_0.2O₂ cathode to enhance the interfacial stability between the cathode and sulfide electrolyte. The source ions (Zr and Mo) coated on the precursor-surface diffused into the structure during the heating process, and influenced the structural parameters. This indicated that the coating ions acted as dopants. They also formed a homogenous coating layer, which are expected to be layers of Li-Zr-O or Li-Mo-O, on the surface of the cathode. The composite electrodes containing the surface-modified LiNi_0.6Co_0.2Mn_0.2O₂ powders exhibited enhanced electrochemical properties. The impedance value of the cells and the formation of undesirable reaction products on the electrodes were also decreased due to surface modification. These results indicate that the precursor-based surface modification using Zr and Mo is an effective method for suppressing side reactions at the cathode/sulfide electrolyte interface.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.55-55
• /
• 2009

FGB(Flexible Glasswool Backing) Submerged Arc Welding has been one of the main welding processes for one side butt welding in shipbuilding industries, which can efficiently improve the welding productivity by the addition of a supplementary filler metal into the molten weld pool. As recent ships have become larger in size, the application of high tensile and higher grade of steels has been continuously increased. Single pass FGB SA welding process accompanies such a high heat input when welding thick plates that the mechanical properties of weld metal can be dramatically degraded. This study has been performed in order to obtain high toughness and tensile properties of high heat input FGB SA welds, and to evaluate the effect of alloy elements on their mechanical properties. To complete welding 25mm-thick EH36 grade steel plate by single pass, 1.2mm diameter and 1.0mm long cut wires has been distributed in the groove before welding, and three different test coupons have been made using C-1.5%Mn, C-1.8%Mn-0.5%Mo, and C-1.4%Mn-1.7%Ni cut wires to investigate the influence of nickel(Ni) and molybdenum(Mo) on the mechanical properties of welds. Test results showed that the addition of Ni and Mo effectively promotes the formation of Acicular Ferrite(AF), while significantly reducing the amount of Grain Boundary Ferrite(GBF) in weld metal microstructures, which resulted in a beneficial effect on low temperature impact toughness and strength.

• Journal of Electrochemical Science and Technology
• /
• 제7권4호
• /
• pp.245-250
• /
• 2016

The layered $Na_{0.6}Li_{0.6}[Mn_{0.72}Ni_{0.18}Co_{0.10}]O_2$ composite with well crystalized and high specific capacity is prepared by molten-salt method and using the substitution of Na for Li-ion battery. The effects of annealing temperature, time, Na contents, and electrochemical performance are investigated. In XRD analysis, the substitution of Na-ion resulted in the P2-$Na_{2/3}MO_2$ structure ($Na_{0.70}MO_{2.05}$), which co-exists in the $Na_{0.6}Li_{0.6}[Mn_{0.72}Ni_{0.18}Co_{0.10}]O_2$ composites. The discharge capacities of cathode materials exhibited $284mAhg^{-1}$ with higher initial coulombic efficiency.

• 한국수소및신에너지학회논문집
• /
• 제11권4호
• /
• pp.189-202
• /
• 2000

$AB_2$ type Zr-based Laves phases alloys have been studied for potential application as a negative electrode in a Ni-MH battery. The $AB_2$-type electrodes have a much higher energy density than $AB_5$-type electrodes per weight, however they have some disadvantages such as poor activation behavior and cycle life etc. Nonetheless, the $AB_2$-type electrodes have been studied very extensively due to their high energy density. In this study, in order to develop the cycle life, the Mn of $AB_2$ alloy composition was substituted partially by Mo. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The alloy powder was used below 200-325 mesh for experiments. The structures and phases of the alloys were analyzed by XRD, SEM and EDS, and measured the curve of a pressure-composition isotherms. The electrodes were prepared by cold pressing of the copper-coated(25 wt%) alloy powders, and tested by a half cell. The results are summarized as follows. The cycle life was improved with the increase of Mo amount in $Zr_{1-x}Ti_xV_{0.4}Ni_{1.2}Mn_{0.4}Mo_y$(x=0.3, 0.4) and the activation was faster, whereas the discharge capacity decreased.

• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.101-108
• /
• 1991

0.2 mo1% La doped BaTiO3 samples were prepared by a wet chemical process (Pechini process) and electrical conductivity were measured from annealing temperatures(800-110$0^{\circ}C$) to room temperature continuously. 2 probe I-V characteristics showed that Pt electrodes were non-ohmic below about 80$0^{\circ}C$ for Ladoped sample. I-V curves showed varistor behavior and breakdown voltages showed PTC-like behavior. AC complex impedance of 0.2 La and 0.05 Mn mo1% doped BaTiO3 samples with three different electrodes (electroless Ni, Pt, Ag electrodes) were measured with temperature variation. Complex impedance plots showed that the samples with electroless Ni electrodes have negligible electrode resistance. Samples with Ag or Pt paste electrodes showed large electrode resistance. PTC effect, which is defined as the ratio of maximum resistance to minimum resistance, was found to be less than 10 for 0.2 mo1% La doped dense sample however greater than 105 with codoping of 0.05 mo1% Mn and 0.2 mol% La.

• 한국자기학회지
• /
• 제17권1호
• /
• pp.22-25
• /
• 2007

본 연구에서는 하지층으로 Mo을 사용한 스핀밸브구조에서 반강자성체 IrMn의 두께 변화에 따른 자기적 특성을 연구하였다. 사용된 스핀밸브는 Si기판/$SiO_2/Mo(17\;{\AA})NiFe(21\;{\AA})/CoFe(28\;{\AA})/Cu(22\;{\AA})/CoFe(18\;{\AA})/IrMn(t\;{\AA})/Ta(25\;{\AA})$ 구조이다. Mo 박막의 비저항은 $600^{\circ}C$에서 $650^{\circ}C$ 열처리 후 급격히 증가하였다. 반강자성체인 IrMn의 두께 변화(130 ${\AA}$까지)에 따른 자기저항비와 교환결합력을 측정하였다. IrMn의 두께가 65 ${\AA}$ 일때 자기저항비와 교환결합력은 9.65%와 337.5 Oe로 최고값을 나타냈다. 그러나 두께를 더욱 증가시킨 97.5 ${\AA}$ 일때 자기저항비와 교환결합력은 8.2%와 285 Oe로 감소하였으며, IrMn의 두께가 130 ${\AA}$ 일때 자기저항비와 교환결합력은 더욱 감소한 7.65%와 257.5 Oe이었다.

• 열처리공학회지
• /
• 제32권4호
• /
• pp.161-167
• /
• 2019

Impact toughness and fracture behavior were studied in five kinds of non-heat treating steels containing bainite; standard(0.25C-1.5Mn-0.5Cr-0.2Mo-0.15V), high V(0.3V), Ni(0.5Mn-2Ni), W(0.4W instead of Mo), and high C-Ni(0.35C-0.5Mn-2Ni) steels. The good hardness and impact toughness balance was exhibited in the $1100^{\circ}C$-rolled condition, while the impact toughness was deteriorated due to coarse grained microstructure in the $1200^{\circ}C$-rolled condition. The impact toughness decreased with increasing the hardness in all steels studied. The fracture behavior was also basically identical, that is, the fracture area was divided into 3 zones; shear and fibrous zone, fracture transition zone with ductile dimples and cleavage cracks, where the cracks initiate and grow to critical size, unstable cleavage fracture propagation zone. The energy absorbed for the critical crack formation through the plastic deformation inside the plastic zone in front of the notch root contributed to a mostly significant portion of the total impact energy.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1020-1025
• /
• 1998

Mn-Mo-Ni 저합금강의 중성자 조사에 따른 기계적(미세경도, 인장, 샤피충격시험) 및 자기적(포화자화, 보자력, 잔류자화, Barkhausen Noise(BN)진폭, BN에너지) 성질 변화를 측정하여 이들의 상관관계를 고찰하였다. 기계적 성질시험 결과, 중성자 조사로 인하여 항복강도, 인장강도, 미세경도 및 천이온도($T_{41J}$)는 증가하였고 최대흡수에너지(USE)는 감소하였으며, 인장 시험의 경우 용접금속에서는 모재와 비교했을 때 큰 변화가 없었다. 자기적 성질을 측정한 결과, 잔류자화, BN진폭, BN에너지는 감소하였고 보자력은 급격히 증가하는 것으로 나타났다. 기계적.자기적 성질변화의 상관관계에서 자기적성질인 보자력 증가에 따라 천이온도, 항복강도, 경도는 증가하고 USE는 감소하였고, BN진폭의 경우는 보자력과 반대의 경향을 보였다. 본 실험에서 중성자조사로 인한 기계적.자기적 성질변화가 일관성 있는 상관관계가 있음을 확인하였고, 이들의 변화를 통해 조사손상을 평가하는 데 이용 가능하다.