• 한국자기공명학회논문지
• /
• 제6권1호
• /
• pp.20-37
• /
• 2002

MnAPSO-34 and Mn-impregnated SAPO-34(Mn-SAPO-34) sample were prepared with various manganese contents and studied by electron spin resonance(ESR) and electron spin echo modulation(ESEM). Electron spin echo modulation analysis of 0.07mo1 ％ Mn(relative to p) in MnAPSO-34 with adsorbed D$_{2}$O shows two deuteriums at 0.26 nm and two at 0.36 nm from Mn. This suggests that two waters hydrate an MnO$_{4}$ configuration with a D-O bond orientation for the waters as expect for a negatively charged site at low manganese content (0.1 mol％), the ESR spectra of MnAPSO-34 and MnH-SAPO-34 exhibit the same parameters(g 2.01 and A 89 G), but the spectra obtained from MnAPSO-34 samples are better resolved. The decomposition temperature of as-synthesized MnAPSO-34 were in the range of 200-600 $^{\circ}C$ of the morpholine which is 12 $^{\circ}C$ higher than that in as-synthesized MnH-SAPO-34. Infrared spectra showed that the position of a band at 3450 $cm^{-1}$ / shifted about 15 $cm^{-1}$ / toward higher energy in MnAPSO-34 versus MnH-SAPO-34. The modulation depth of the two-pulse ESE of MnAPSO-34 with adsorbed D$_{2}$O is deeper than that of MnH-SAPO-34 with adsorbed D$_{2}$O. Three-pulse ESEM of MnAPSO-34 and MnH-SAPO-34 with adsorbed deuterium oxide shows that the local environments of manganese in the hydrated samples are different, suggesting that Mn(II) is framework substituted in MnAPSO-34 since it obviously occupies an extraframework position in MnH-SAPO-34.

• Nuclear Engineering and Technology
• /
• 제11권1호
• /
• pp.21-27
• /
• 1979

TRIGA Mark II 원자로심에서 반응율을 측정하여 중성자 spectrum parameter인 상대적인 증성자 온도 T$^{n}$ 과 열외중성자 지수 (equation omitted)를 얻기 위해 해석하였다. 측정은 경수 환경하에 있는 central thimble과 F2위치에서 수행되었다. 상대적인 중성자 온도는 Lu과 Mn의 방사화율로 표시되며 열외중성자 지수는 Au와 Mn의 반응율에 의go서 측정된다. 이들 검출박의 상대적인 ${\gamma}$-에너지는 multichannel analyzer에 의해서 분석되었다. 실험 결과는 이론적인 계산치와 비교 평가되었다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.782-785
• /
• 1995

In this paper, $Mn^{2+}$ ion was doped in Y-Ba-Cu-O as an EPR probe. The following samples were prepared by conventional solid-state reaction method : $YBa_{2}Cu_{2.96}Mn_{0.04}O_{7-\delta}$ (MN-I), annealed $YBa_{2}Cu_{2.96}Mn_{0.04}O_{7-\delta}$ (AMN) and $YBa_{2}Cu_{2.94}Mn_{0.06}O_{7-\delta}$ (MN-II). AMN sample was obtained from MN-I by annealing for 1 hr under the Ar gas atmosphere at $600^{\circ}C$. X-band (~9.05 GHz) EPR spectra were measured from 103 K to room temperature by employing a JES-RE3X spectroscopy with a $TE_{0.11}$ cylindrical cavity and 100 kHz modulation frequency. In MN-I we have observed only the $Cu^{2+}$ signal. The fact that no $Mn^{2+}$ signal was observed, in spite of $Mn^{2+}$ being a very sensitive EPR probe, indicates that most likely isolated $Mn^{2+}$ ions don't exist in the MN-I sample. Most probably $Mn^{2+}$ ions in the MN-I sample interact antiferromagnetically and hence are EPR silent. The AMN spectra of at room temperature and 103 K indicate not only the $Cu^{2+}$ signal but also an extra signal, which increases with decreasing temperature. It is suggested that the extra signal originates from Mn ions that were antiferromagnetically coupled before the annealing process. In MN-II, from 103 K to room temperature, also, the extra signal was observed together with the $Cu^{2+}$ signal. The extra signal in MN-II, however, decreases with decreasing temperature and nearly disappears at 103 K. The signal originates from Mn ions in impurity phases that include $Mn^{2+}$ ions. We suppose that there exist at least two $Mn^{2+}$ doped phases in Y-Ba-Cu-O. The $Mn^{2+}$ signal of one phase is undectable at all temperature and that of another phase decreases with decreasing temperature and disappears around 103 K.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2544-2548
• /
• 2011

Two pyridinecarboxamide cobalt dicyanide building blocks and Mn(III) compounds have been employed to assemble cyanide-bridged heterometallic complexes, resulting in three trinuclear cyanide-bridged $Co^{III}-Mn^{II}$ complexes: $\{[Mn(MeOH)_4][Co(bpb)(CN)_2]_2\}{\cdot}2MeOH{\cdot}2H_2O$ (1), $\{[Mn(MeOH)_4][Co(bpmb)(CN)_2]_2\}{\cdot}2MeOH{\cdot}2H_2O$ (2) and $\{[Mn(DMF)_2(en)_2][Co(bpb)(CN)_2]_2\}{\cdot}2DMF{\cdot}H_2O$ (3) ($bpb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)benzenate, $bpmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate, en = ethylenediamine). Single crystal X-ray diffraction analysis shows their similar sandwich-like structures, in which the two cyanide-containing building blocks act as monodentate ligands through one of their two cyanide groups to coordinate the Mn(II) center. For complex 3, it was further linked into one-dimensional structure by ethylenediamine acting as bridges. Investigation of the magnetic properties of complex 3 reveals weak antiferromagnetic coupling between the neighboring Mn(II) centers through the bridging ethylenediamine molecule. A best-fit to the magnetic susceptibilities of complex 3 gave the magnetic coupling constant J = -0.073(2) $cm^{-1}$.

• Journal of Crop Science and Biotechnology
• /
• 제10권1호
• /
• pp.8-12
• /
• 2007

All accessions of Rehmannia glutinosa show the unique characteristic of intrinsic tolerance to paraquat. The higher level of endogenous superoxide dismutase(SOD) activity and its increase upon paraquat treatment indicated the involvement of SOD in the tolerance mechanism to paraquat in R. glutinosa. In this study, we examined the isoform-specific response of SOD to oxidative stresses and hormones. Six SOD isoforms were found in the leaf, and they were identified as two MnSODs(named MnSOD I and MnSOD II, in order of increasing mobility), one FeSOD and three Cu/ZnSODs(named Cu/ZnSOD I, Cu/ZnSOD II, and Cu/ZnSOD III, in order of increasing mobility). MnSOD I, MnSOD II, FeSOD, Cu/ZnSOD I, Cu/ZnSOD II, and Cu/ZnSOD III, contributed to 4, 11, 7, 15, 30, and 32% of the total SOD activity, respectively. Total SOD activity levels in the leaf were increased by 4, 24, and 21% by paraquat, salicylic acid(SA), and yeast extract(YE), respectively, but little by ethephon. Six SOD isoforms responded differentially to these stresses and hormones. The activities of all the isoforms were increased by YE and SA except that of MnSOD I which was decreased by SA. The activities of MnSOD I, FeSOD, and CuZnSOD I were increased by paraquat. These results suggest that amelioration of oxidative stresses by SOD is fine-tuned by the differential expression of isoforms in R. glutinosa.

• 대한화학회지
• /
• 제33권6호
• /
• pp.623-632
• /
• 1989

$Mn^{2+}$-치환 제올라이트 A는 가열 탈수되어도 그 구조가 열적을 안정하였다. $Mn_{4,5}Na_3-A$의 수화상태 및 탈수상태에 있어서의 골조원자, 이온 및 물분자들의 위치와 결합에너지를 몇가지 퍼텐셜 함수들을 써서 계산하여 구하였다. 탈수상태의 $Mn_{4,5}Na_3-A$에 있어서 골조원자들의 결합에너지는 열적으로 안정한 것으로 알려져 있는 탈수상태의 $Ca^{2+}$-치환 제올라이트 A($Ca_6$-A) 및 $Co^{2+}$- 치환제올라이트 A($Co_4Na_4-A$)의 그것과 비슷하였다. $Mn^{2+}$-치환 제올라이트 A 골조 내에는 결합에너지의 결합형식이 서로 다른 세 가지 그룹의 물분자들 즉 인접 물분자 또는 골조 산소원자와 수소결합을 하고 있는 물; W(I), $Na^+$이온에 배위되면서 인접 물 분자와 수소결합을 하는 물; W(II) 및 $Mn^{2+}$에 배위면서 수소결합을 하는 W(III)그룹의 물분자들이 존재하였으며 그들의 결합에너지 및 탈수반응의 활성화에너지의 크기 순서는 W(III) > W(II) > W(I)이였다.

• 동력기계공학회지
• /
• 제9권1호
• /
• pp.76-81
• /
• 2005

The effect of micro-pulse plasma nitriding temperature and time on the case thickness, hardness and nitride formation in the surface of Fe-12Cr-22Mn-X alloy with 3% Co and 1% Ti alloys elements investigated. External compound layer and internal diffusion layer was constituted in plasma nitride case of Fe-12Cr-22Mn-X alloys and formed nitride phase such as ${\gamma}'-Fe4N\;and\;{\varepsilon}-Fe2-3N$. Case depth increased with increasing the plasma nitriding temperature and time. Surface hardness of nitrided Fe-12Cr-22Mn-X alloys obtained the above value of Hv 1,600 and case depth obtained the above value of $45{\mu}m$ in Fe-12Cr-22Mn-3Co alloy and $60{\mu}m$ in Fe-12Cr-22Mn-1Ti alloy. Wear-resistance increased with increasing plasma nitriding time and showing the higher value in Fe-12Cr-22Mn-1Ti alloy than Fe-12Cr-22Mn-3Co alloy.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.114-114
• /
• 1993

• 대한화학회지
• /
• 제17권5호
• /
• pp.346-352
• /
• 1973

양이온교환수지관($Dowex 50w{\times}12$, $35cm{\times}3.14cm^2$)을 사용하여 0.1M의 V(V), Cu(II), Ni(II), Co(II), Cr(III), Mn(III), Fe(II), 용액을 각기 1ml씩 섞은 혼합 용액 7ml를 다음과 같은 용리액으로 용리시켜 정량적으로 분리하였다. 즉 Fe(II), V(V), Cu(II), Ni(II), Co(II)에 대하여는 0.6M 염화나트륨과 0.1M 타르타르산나트륨의 혼합용액 (pH 2.00과 4.50)을 Mn(II)과 Cr(III)에 대하여는 3M 염화나트륨과 0.1M 타르타르산나트륨의 혼합용액 (pH 4.50과 5.00)을 용리액으로 사용하여 단계적으로 용리하였다. 많은 양($97\%$ 정도)의 Fe(II)과 V(V), Cu(II), Ni(II), Mn(II), Cr(III)을 섞은 시료용액은 먼저 음이온교환수지관($Dowex 1{\times}8$, $15cm{\times}3.14cm^2$)을 사용하여 4.0M 염산으로 용리하여 대부분의 철을 분리한다. 이때 V(V), Ni(II), Mn(II), Cr(II)은 같은 위치에서 용출되므로 함께 받고 다음에 Cu(II)는 소량의 철과 함께 용출된다. 이것을 다시 양이온수지관($Dowex 50w{\times}12$, $10cm{\times}3.14cm^2$)을 사용하여 여러 가지 이온들을 분리할 수 있었으며 철강중에 들어있는 양이온 성분들도 같은 방법으로 분리할 수 있었다.

• 한국주조공학회지
• /
• 제29권6호
• /
• pp.270-276
• /
• 2009

After casting button-type small ingots of ternary Fe-Mn-S alloys which had three different Mn/S ratios (1, 5 and 70) in a vacuum arc furnace, the effect of the ratio on the sulfide formation was investigated. In case of the Mn/S ratio of 1, if alloy composition was located in an iron-rich corner on a Fe-Mn-S ternary phase diagram, only duplex MnS-FeS sulfide films were observed in the grain boundary. If the alloy composition was located in the miscibility gap area of the phase diagram, primary globular dendritic sulfides and dendritic sulfide slags were generated within the grain and tubular monotectic sulfides were also detected in the grain boundary. When the Mn/S ratio was 5, if the alloy composition was in the iron-rich corner, only bead-like sulfides were generated. On the other hand, if the composition was in the miscibility gap area, globular dendritic sulfides and dendritic sulfide slags were generated in the form of primary sulfide inclusions and rod-like eutectic sulfides were observed in the grain boundary. Especially, if the contents of Mn and S increased more in the miscibility gap area of the phase diagram, primary globular sulfides containing iron intrusions were observed. In case of Mn/S ratio of 70, if the contents of Mn and S was decreased in the Fe corner of the phase diagram, only bead-like sulfides were observed in the grain boundary. Despite the composition was outside the miscibility gap area of the phase diagram, if the contents of Mn and S increased, clusters of fine sulfide particles as well as fine spherical primary monophase sulfides were observed in the grain boundary.