• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.164-167
• /
• 2003

In this study, we developed the mold for the plastic cavity filter which is a kind of a wireless communication device. Since the cavity filter is made of aluminium, the cost of fabrication is high and the production rate is low. But we can produce plastic cavity filter part by injection molding process with the mold which was designed by our team. The dimension and surface quality of plastic cavity filter was investigated by varying the molding method (conventional and MmSH process) and two different types of resin(PC/ABS and ABS). In case of ABS part, the shrinkage of the inner partition walls was decreased when we adopted MmSH method. The weight of both ABS and PC/ABS parts increased and the surface roughness decreased with MmSH process.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.359-361
• /
• 2003

본 연구에서는 무선부품의 일종인 cavity filter 금형을 제작하였고, 도금용 ARS 수지와 PC/ARS Alloy 수지를 사용하여 일반사출성형과 금형온도가 높은 MmSH방식, 두 타입으로 성형품을 제작하였다. 성형품의 수축률 변화는 MmSH 방식일 때 ABS 수지로 제작한 성형품의 단위캐비티 격막부분에서 수축률이 감소되었다. 중량변화는 ABS와 PC/ABS Alloy로 제작된 성형품 모두 MmSH 방식일 때 증가하였고. 성형품의 표면 거칠기도 모두 MmSH 방식일 때 거칠기가 감소되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.433-437
• /
• 2004

The MmSH is a process of injecting ABS to produce innovated physical properties compared to the conventional injection process. Physical properties such as thickness and adhesion strength of Ni plate electrolessly coated on a conventional and a MmSH injected ABS have been studied in the pH range 4~8. Thickness of the plate on the MmSH and the conventionally injected ABS appeared to be directly proportional to pH. The ABS processed by the conventional injection showed adhesion strength corresponded to ASTM 4B above pH 5. On the other hand, the ABS processed by the MmSH injection showed a superior adhesion strength corresponded to ASTM 5B above pH 6. It was calculated the shielding effectiveness of above 50 dB in all conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.168-171
• /
• 2003

Nano pattern structure is produced using the conventional injection molding and the MmSH method. Plastic parts using PC make used of the MmSH method is much better than the other about manufacture showed transcription of nano pattern. The conventional injection molding, transcription of plastic parts with nano pattern using HIPS showed better than PC. In the result, transcription of nano pattern improve when well liquidity and high temperature of mold surface.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.1
• /
• pp.33-37
• /
• 2008

Polycarbonate has a high transmittance to light, low specific gravity, flexibility and cost-effectiveness that extends the application field of the polymer to bio-engineering, optics, electronic parts, etc. Moreover, electro plating of metallic film on PC could endow the parts the electromagnetic interference shielding capability. However, poor adhesion of copper on PC limited the wide usage in the industry. In this work, a composite(PC/ABS) and MmSH(Momentary mold Surface Heating) injection process were used to improve the plating characteristics; plating thickness, gloss and adhesion. Also plasma treatment and chemical treatment were employed for improving adhesion. Plating characteristics on PC/ABS were better than those on PC due to the anchoring effect of butadiene. MmSH injection process could ameliorate the gloss and coating adhesion. Also plating thickness and adhesion of PC and PC/ABS were increased by plasma treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.416-417
• /
• 2007

MmSH injection molding method to fabricate light guiding plate with nano-sized pattern was developed. A stamper was fabricated through photolithography, dry etching, and electroplating processes. While the stamper with nano-sized pattern in mold was kept at $180^{\circ}C$ during injection process, that was cooled down to $90^{\circ}C$ quickly after the injection process. The nano-sized pattern on light guiding plate processed by MmSH injection molding method was well transferred from stamper compared to that processed by conventional injection molding process.

• Journal of Periodontal and Implant Science
• /
• v.54 no.2
• /
• pp.108-121
• /
• 2024

Purpose: The aim of this study was to compare changes in soft and hard tissue and the histologic composition following early implant placement in sites with alveolar ridge preservation or spontaneous healing (SH), as well as implant performance up to 1 year after crown insertion. Methods: Thirty-five patients with either intact buccal bone plates or dehiscence of up to 50% following single-tooth extraction of incisors, canines, or premolars were included in the study. They were randomly assigned to undergo one of three procedures: deproteinized bovine bone mineral with 10% collagen (DBBM-C) covered by a collagen matrix (DBBM-C/CM), DBBM-C alone, or SH. At 8 weeks, implant placement was carried out, and cone-beam computed tomography scans and impressions were obtained for profilometric analysis. Patients were followed up after the final crown insertion and again at 1 year post-procedure. Results: Within the first 8 weeks following tooth extraction, the median height of the buccal soft tissue contour changed by -2.11 mm for the DBBM-C/CM group, -1.62 mm for the DBBM-C group, and -1.93 mm for the SH group. The corresponding height of the buccal mineralized tissue changed by -0.27 mm for the DBBM-C/CM group, -2.73 mm for the DBBM-C group, and -1.48 mm for the SH group. The median contour changes between crown insertion and 1 year were -0.19 mm in the DBBM-C/CM group, -0.09 mm in the DBBM-C group, and -0.29 mm in the SH group. Conclusions: Major vertical and horizontal ridge contour changes occurred, irrespective of the treatment modality, up to 8 weeks following tooth extraction. The DBBM-C/CM preserved more mineralized tissue throughout this period, despite a substantial reduction in the overall contour. All 3 protocols led to stable tissues for up to 1 year.

• Anatomy & Biological Anthropology
• /
• v.29 no.4
• /
• pp.145-154
• /
• 2016

The purpose of this study was to provide basic biometric data on Korean adults through magnetic resonance imaging (MRI)-based measurements of the distances between the apex of sacral hiatus (SH) and the termination of dural sac (DS), and between SH and conus medullaris (CM) because they are critical to the performance of epidural neuroplasty. A total of 200 patients(88 males and 112 females) with back pain, who had no spine fracture, significant spinal deformity, and spondyloisthesis were selected for this study. The subjects were of mean age 54.3 (20~84) years and mean height 161.3 cm (135~187). T2-weighted MRI images were used for correlation analysis to evaluate the relationships between the distances, and variables such as sex and height. In all patients, the mean distance between SH and DS was $62.8{\pm}9.4mm$ and the mean distance between SH and CM was $232.2{\pm}21.8mm$. The minimum distance and the maximum distance between SH and DS were 34.8 mm and 93.9 mm respectively, and the minimum distance and the maximum distance between SH and CM were 155.0 mm and 284.0 mm respectively. In female patients, both the distances between the SH and DS, and between SH and CM were shorter when compared to those of the male patients(p<0.05). Both the distances between SH and DS and between SH and CM showed a significant correlation with height(p<0.01). The results of this study will provide a useful biometric data on the distances between SH and DS and between SH and CM in Korean in ensuring clinical safety and in the development of more effective catheterization techniques for epidural neuroplasty in Korean.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.69-71
• /
• 2004

새로운 기술인 Momentary mold surface heating(MmSH)은 기존의 사출성형법으로 제조된 Acrylonitrile Butadiene Styrene(ABS)의 단점을 개선한 사출성형법이다. MmSH로 제조된 ABS와 기존의 사출성형법으로 제조된 ABS의 도금특성을 도금욕 pH 변화에 따라 연구하였다. Sodium hypophosphite가 첨가된 무전해 Ni 도금욕의 PH가 증가할수록 도금 두께가 증가하였고 기존의 사출성형법으로 제조된 ABS의 경우 pH 5이상에서 4B의 밀착력을 가졌다. MmSH로 제조된 ABS의 경우 pH 6이상에서 5B인 12.3N/25mm 이상의 가장 우수한 밀착력을 나타내었다.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.105-112
• /
• 1997

For improvement of fishermen's income by oyster cultivation in eastern coast of Korea, the spats of oyster (Crassostrea gigas) collected from Hadong in southern coast of Korea were transplanted to Chumunjin and cultured by hanging long line method from August 1994 to July 1995 for examination of their growth and ground environmental conditions. The environmental conditions show the annual range of water temperature as 8.33~$25.62^{\circ}C$, salinity as 32.84~$34.28\textperthousand$, PO4-P as 0.09~0.40$\mu$g-at/1, dissolived inorganic nitrogen (DIN) as 0.32~3.21$\mu$g-at/1. The growth of oyster in hanging culture was as follows : 88.7mm (shell hight) in upper layer (7m), 84.9mm in middle layer (10m) and 78.0mm in lower layer (13m) after one-year cultivation. Thus, the oysters in upper layer had grown relatively faster than those in lower layer. The relationships between shell hight (SH) and shell length (SL) in each culturing depth as follows : SL=0.5403 SH+8.5486 (r=0.9959) in upper layer, SL=0.5813 SH+3.7775 (r=0.9869) in middle layer, and SL=0.5159 SH+6.8736 (r=0.9961) in lower layer. The meat weight of oyster was the highest value as 13.24g in upper layer, and 12.68g in middle layer, and lowest as 10.96g in lower layer. The relationships between total wight (TW) and meat weight (MW) with culturing water layer were as follows : MW=0.1933 TW+0.1051 (r=0.0073) in upper layer, MW=0.1915 TW+0.1894 (r=0.9984) in middle layer, and MW=0.1650 TW+0.0558 (r=0.9983) in lower layer.