• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.644-650
• /
• 2012

This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.480-485
• /
• 1998

Application of trans rectal ultrasonography to buffaloes (n=6) to follow the growth of large antral follicles individually, on each day of one interovulatory interval revealed that follicular turnover during oestrous cycle occured in waves. There was a predominance of a two-wave pattern (5/6 animals) compared to that of a three-wave pattern (1/6 animals). For two-wave pattern, the first wave emerged at Day $0.20{\pm}0.19$ (Day 0 = day of ovulation) and was marked by development of a dominant anovulatory follicle which grew in size from $5.40{\pm}0.24mm$ at the day of detection to a maximum diameter of $12.40{\pm}0.81mm$ on Day $8.60{\pm}1.57$, with a growth rate of $0.88{\pm}0.17mm/day$ and then regressed, with a mean persistence of $19.40{\pm}1.54$ days. The second wave emerged at Day $9.20{\pm}1.06$ and was marked by development of a dominant ovulatory follicle which grew in size from $4.20{\pm}0.37mm$ at the day of detection to a maximum diameter of $13.80{\pm}0.37mm$ on Day $21.00{\pm}1.38$, with a growth rate of $0.66{\pm}0.12mm/day$ and then ovulated on Day $21.60{\pm}1.25$, with a mean persistence of $11.80{\pm}1.39$ days. The maximum diameters attained and the growth rates of dominant anovulatory and dominant ovulatory follicles, and the mean number of follicles ${\geq}3mm$ diameter detected at the time of emergence of first and second waves ($11.80{\pm}1.74$ and $9.00{\pm}2.81$, respectively) were not significantly different. In the animal which showed a three-wave pattern, the first, second and third waves emerged on Days 1, 10 and 19, respectively. All animals, except one had at least one subordinate follicle in the first or second or both waves. The subordinate follicles increased in diameter over a few days and then regressed. The results indicate that in buffaloes, the follicular turnover during oestrous cycle occurs predominantly in a two-wave pattern.

• 비파괴검사학회지
• /
• 제35권6호
• /
• pp.389-397
• /
• 2015

Recently, wave propagation imaging based on laser scanning-generated elastic waves has been intensively used for nondestructive inspection. However, the proficiency of the conventional software based system reduces when the scan area is large since the processing time increases significantly due to unavoidable processor multitasking, where computing resources are shared with multiple processes. Hence, the field programmable gate array (FPGA) was introduced for a wave propagation imaging method in order to obtain extreme processing time reduction. An FPGA board was used for the design, implementing post-processing ultrasonic wave propagation imaging (UWPI). The results were compared with the conventional system and considerable improvement was observed, with at least 78% (scanning of $100{\times}100mm^2$ with 0.5 mm interval) to 87.5% (scanning of $200{\times}200mm^2$ with 0.5 mm interval) less processing time, strengthening the claim for the research. This new concept to implement FPGA technology into the UPI system will act as a break-through technology for full-scale automatic inspection.

• 한국통신학회논문지
• /
• 제36권10A호
• /
• pp.847-851
• /
• 2011

본 논문에서는 밀리미터파 응용에서 사용 가능한 우수한 성능의 MMIC (Millimeter-wave Monolithic Integrated Circuit) star 혼합기를 구현하였다. MMIC star 혼합기를 구현하기 위하여 PHEMT (pseudomorphic high electron mobility transistor) 공정 기반의 소오스와 드레인 단자를 연결한 쇼트키 (Schottky) 다이오드를 사용하였다. 혼합기의 측정 결과 LO 주파수가 75 GHz이며 전력이 10 dBm 인 경우, 81 GHz에서 86 GHz의 RF 주파수 범위에서 평균 13 dB의 변환손실 특성을 얻었다. RF-LO 격리도 특성은 30 dB 이상의 결과를 얻었으며 약 4 dBm의 P1 dB 특성을 얻었다. 전체 칩의 크기는 0.8 mm ${\times}$ 0.8 mm이다.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.974-982
• /
• 2009

주파수 안정성 이 우수한 밀리미터파 및 테라헤르츠파 대역 연속파(Continuous Wave: CW) 신호를 발생시키기 위하여 상관관계가 큰 서로 다른 두 파장의 광 신호를 비팅(beating) 시켜 광 혼합(photomixing) 방법에 관한 많은 연구가 진행되고 있다. 광 반송파가 억압된 양측 대역(Double Sideband-Suppressed Carrier: DSB-SC) 방식은 단일 파장 광 신호를 국부 발진기와 광 변조기를 이용하여 CW 변조함으로써 상관관계가 큰 서로 다른 두 파장의 광 신호를 생성하는 방법이다. 본 논문에서는 DSB-SC를 이용한 광 혼합 밀리미터파 및 테라헤르츠파 대역 CW신호 발생 방법에서 광 반송파 억압 레벨에 따른 밀리미터파 및 테라헤르츠파 대역 CW 신호의 파워 및 위상 잡음 특성을 수치적으로 분석하고 실험적으로 증명하였다. 측정 결과, 광 반송파의 억압 레벨에 따라서 밀리미터파 및 테라헤르츠파 대역 CW 신호의 파워와 위상 잡음이 각각 23.9 dB와 21 dBc/Hz(@ 1 MHz offset frequency) 개선됨을 확인하였다. DSB-SC 방법을 다룬 기존 문헌에서는 직관적으로 광 반송파 억제 레벨을 중요성을 언급하였으나, 본 논문에서는 수식 및 측정 데이터에 기반한 밀리미터파 및 테라헤르츠파 대역 CW신호의 특성 향상을 위한 광 반송파 억제 레벨의 중요성을 확인하였다. 따라서 본 논문의 결과는 광 혼합 방법을 이용한 밀리미터파 및 테라헤르츠파 대역 CW 신호 발생 연구를 위한 기본적인 데이터로서 활용 가치가 높다.

• 대한전자공학회논문지TC
• /
• 제46권8호
• /
• pp.67-78
• /
• 2009

유전상수가 10인 기판에 mushroom 형태를 가지는 EBG 구조를 전 방향과 길이 방향으로 집적한 패치안테나의 방사 특성을 체계적으로 해석하였다. 기판이 두꺼워질수록 표면파가 더 많이 발생하여 EBG 구조가 패치 안테나의 입력 임피던스와 방사 패턴에 미치는 영향이 커지는 것을 볼 수 있었다 기판 두께가 3.2 mm, 1.6 mm, 0.8 mm 인 경우 EBG 구조와 패치 중심 사이의 거리가 각각 0.4 ${\gamma}_0$, 0.2 ${\gamma}_0$, 0.1 ${\gamma}_0$ 이상 되어야 EBG 구조가 패치안테나의 입력 임피던스에 영향을 거의 주지 않았다. 기판 두께가 3.2 mm, 1.6 mm, 0.8 mm 인 경우 EBG 구조를 각각 2 주기, 2 주기, 3 주기 이상 집적하면 표면파가 억제되어 전방 방사가 향상되었다. EBG 구조를 길이 방향으로 집적한 경우와 전 방향으로 집적한 경우 EBG 구조가 패치안테나의 방사 특성에 미치는 영향은 비슷하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.633-636
• /
• 1998

In this study, power AlGaAs/InGaAs/GaAs PM-HEMT's for mm wave's were fabricated using Electron beam lithography and air-bridge techniques, and so on. DC and AC characteristics of the fabricated power PM-HEMTs were measured under the various bias conditions. For example, DC and RF characteristics such as S21 gain of 3.6 dB at 35 ㎓, current gain cut-off frequencies of 45 ㎓ and maximum oscillation frequencies of 100 ㎓ were carefully analyzed for design methodology of sub-mm wave power devices.

• 대한전자공학회논문지TC
• /
• 제42권5호
• /
• pp.61-68
• /
• 2005

본 논문에서는 낮은 변환손실 특성의 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) resistive 믹서를 설계 및 제작하였다. MIMIC resistive 믹서는 $0.1{\mu}m$ InGaAs/InAlAs/GaAs Metamorphic HEMT (High Electron Mobility Transistor)를 이용하여 설계 및 제작되었다. 제작된 MHEMT는 드레인 전류 밀도 665 mA/mm, 최대 전달컨덕턴스(Gm)는 691 mS/mm를 얻었으며, RF 특성으로 fT는 189 GHz, fmax는 334 GHz의 양호한 성능을 나타내었다. 94 GHz MIMIC 믹서의 개발을 위해 MHEMT의 비선형 모델과 CPW 라이브러리를 구축하였으며, 이를 이용하여 MIMIC 믹서를 설계하였다. 설계된 믹서는 본 연구에서 개발된 MHEMT MIMIC 공정을 이용해 제작되었다. 94 GHz MIMIC resistive 믹서의 측정결과 변환손실 특성은 94 GHz에서 8.2 dB의 양호한 특성을 나타내었으며, 입력 P1 dB는 9 dBm, 출력 P1 dB는 0 dBm의 결과를 얻었다. Resistive 믹서의 LO-IF 격리도는 94.03 GHz에서 15.6 dB의 측정 결과를 얻었다. 본 논문에서 설계 및 제작된 94 GHz MIMIC resistive 믹서는 기존의 W-band 대역 resistive 믹서와 비교하여 낮은 변환손실 특성을 나타내었다.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.9-18
• /
• 2018

PURPOSES : In this research, the initiation and development of corrugation on a gravel road with certain wheel and boundary conditions were evaluated using a coupled discrete-element method (DEM) with multibody dynamics (MBD). METHODS : In this study, 665,534 particles with a 4-mm diameter were generated and compacted to build a circular roadbed track, with a depth and width of 42 mm and 50 mm, respectively. A single wheel with a 100-mm diameter, 40-mm width, and 0.157-kg mass was considered for the track. The single wheel was set to run slowly on the track with a speed of 2.5 rad/s so that the corrugation was gradually initiated and developed without losing contact between the wheel and the roadbed. Then, the shape of the track surface was monitored, and the movement of the particles in the roadbed was tracked at certain wheel-pass numbers to evaluate the overall corrugation initiation and development mechanism. RESULTS : Two types of corrugation, long wave-length and short wave-length, were observed in the circular track. It seems that the long wave-length corrugation was developed by the longitudinal movement of surface particles in the entire track, while the short wave-length corrugation was developed by shear deformation in a local section. Properties such as particle coefficients, track bulk density, and wheel mass, have significant effects on the initiation and development of long-wave corrugation. CONCLUSIONS : It was concluded that the coupled numerical method applied in this research could be effectively used to simulate the corrugation of a gravel road and to understand the mechanism that initiates and develops corrugation. To derive a comprehensive conclusion for the corrugation development under various conditions, the driver's acceleration and deceleration with various particle gradations and wheel-configuration models should be considered in the simulation.

• 한국전자파학회논문지
• /
• 제17권4호
• /
• pp.330-334
• /
• 2006

본 논문에서 Sendust, Mn-Zn, Ni-Zn, Ba, Sr Ferrite를 사용하여 페인트형 흡수체를 제작하였다. 지지재로서는 enamel, epoxy, urethane 페인트들을 사용하여 각각 흡수능을 측정하였다. 그리고 $Al(OH)_3$으로 코팅한 흡수체의 대역폭은 코팅을 하지 않은 것보다 더 넓어지는 것을 알 수 있다. 또 2 mm 두께의 적층형 흡수체는 X-band에서 대략 20 dB의 흡수능을 보여준다.