• 한국연소학회지
• /
• 제1권1호
• /
• pp.51-55
• /
• 1996

An experimental investigation has been made with the objective of studying the limits of equivalence ratio on mixing enhancement in a tone excited jet flame. The jet is pulsed by means of a loudspeaker-driven cavity and rich flames(${\phi}>1.5$) are used. The excitation frequency is chosen for the resonant frequency identified as a pipe resonance due to acoustic excitation. Methane, propane and butane are used to examine the effect of mixture property on the limit of equivalence ratio. Mixing is always enhanced in a methane/air flame as the excitation intensity increases. Constant lower limits of equivalence ratio for mixing enhancement are present in cases of propane/air and butane/air flames irrespective of mean mixture velocities. The equivalence ratio limits are also found to be related to the flame instability ; the lower Le, the higher the limit of equivalence ratio. Under the equivalence ratio limits, cellular flames are generated as the excitation intensity increases. The amplitude of oscillating velocity for generating a cellular flame in the equivalence ratio limit is proportional to a mean mixture velocity irrespective of fuels.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.821-822
• /
• 2010

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.410-416
• /
• 1983

This study presents the combustion characteristics and flame structure of annular swirling flow when there were changes the equivalence ratio and swirl number of swirling jet of fuelair mixture. The conclusions of this study are as follows; During the investigations in which the change of equivalence ratio and swirl number were studied, three basic shapes of flame were observed in this study. Visible flame lengths of swirling jet results in the decrease with increasing of swirl number and air-fuel ratio of mixture. Radial distribution of flame temperature with strong swirl is higher than that of weak swirl at the same equivalence ratio of mixture. The angle of spread of the annular jet increases with the increase of swirl number. When the swirl intensity is increased in a jet, the decay of concentration of carbon dioxide is decreased with the distance from nozzle exit of burner.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.90-96
• /
• 2001

Catalytic ignition of $H_2/O_2/CO_2$ mixtures over platinum catalyst is experimentally investigated by using microcalorimetry. For comparison, $N_2$ and Ar is also used as diluent gas. The gas mixture flows toward platinum foil heated by electric current at atmosphere pressure and ambient temperature. The ignition temperature range 350-445K according to the fuel ratio, dilution ratio and diluent gas. It increases as the fuel ratio and dilution ratio increase. $H_2/O_2$ mixture with $CO_2$ ignites at higher temperature than with other diluents by 30-50K. Several experimental evidences show the inhibition effects of $CO_2$ in $H_2-O_2$ heterogeneous reaction is considerable

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.79-85
• /
• 2005

This work is to investigate the surface heat flux and combustion characteristics of premixed propane mixture in a constant volume chamber. The experiment of heat flux and combustion characteristics of premixed propane mixture are performed with various equivalence ratio and initial pressure conditions. Based on the experimental results, it is found that the maximum instantaneous temperature is increased with the increase of initial pressure in the chamber. There are significant differences in the burning velocity of premixed propane mixture at different measuring points in the constant volume combustion chamber. A]so, the trends of temperature difference at each measuring points are similar to the burning velocity in the combustion chamber. It is concluded that the total heat loss during the combustion period is affected by the equivalence ratio and the initial condition of fuel-air mixture.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.181-188
• /
• 2004

A cylindrical constant-volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of an inhomogeneous charge methane-air mixture under several parameters such as stratified pattern, initial charge pressure, ignition time and the excess air ratio of the initial charge mixture. Flow characteristics including mean velocity and turbulence intensity were analyzed by a hot-wire anemometer. The combustion pressure development, measured by a piezo-electric pressure transducer, was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to near-zero value at 3000 ms. For the stratified patterns, the combustion rate under the rich injection (RI) condition was the fastest. Under the initial charge conditions, the second mixture was accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the combustion rate.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.552-560
• /
• 1994

A composite of TiB2-Al2O3 system was successfully prepared from a mixture of TiO2, B2O3, and Al by self-propagating high temperature synthesis (SHS) with a novel characteristic, utilizing the internal oxidation heat of aluminium metal of the mixture, instead of by a conventional technique, externally heating a mixture of Ti, B and Al2O3. From a mixture with B/Ti molar ratio of =2.0, pure two phases of TiB2 and $\alpha$-Al2O3 with good crystallinity and small, uniform sizes were formed. However, when the B/Ti molar ratio of the mixture goes to a value less than 2.0, in addition to the above main minerals, a small smounts of metastable phases such as TiB and Ti3B4 were formed. It was found that about 60%, the optimum green density of compacts gave their highest reaction rate and temperature during SHS process. TiB2-Al2O3 system composite with B/Ti molar ratio of =2.0 could be pressurelessly sintered even at 190$0^{\circ}C$ under Ar gas flows without any addition of sintering aids, showing their good properties such as 91.2% in relative density, 2750 kgf/$\textrm{mm}^2$ in Vickers hardness and 2620 kgf/$\textrm{cm}^2$ in flexural strength.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.437-444
• /
• 2010

Dry Process(natural drying, hot-air drying, oil fry drying), optimized mixture ratio and the condition of carbonization was carried out in order to improve the product durability develop eco-friendly solid fuel mixing food waste and paper sludge. As a result of the experiment, oil fry drying process was the fastest method for drying food waste and paper sludge mixture that contains 80% water inside, and the optimized mixture ratio to minimize the generating concentration of chlorine gas against caloric value of mixture ratio was 7:3. Additionally proper temperature of product carbonization was about $200^{\circ}C$ and shown increasing product durability through the carbonization. Therefore, the pelletized solid fuel be shaped diameter around 0.5cm, length 2cm under which was pulverized and molded using 7:3 mixture of food waste, and paper sludge was the eco-friendly solid fuel possible to be industrialized which is consist of chlorine concentration of below 2.0wt% and the lowest caloric value of over 5,000kcal/kg. In conclusion, this developing manufacturing process of the solid fuel can be interpreted to contribute alternative energy development in accordance with low carbon and green growth era.

• 아시안잔디학회지
• /
• 제23권2호
• /
• pp.271-278
• /
• 2009

본 연구는 골프장의 상토조성 시 사용되는 토양개량제의 적절한 활용과 이해를 위해 입경과 화학적 특성이 비슷한 무기성 토양개량제의 3종의 혼합비율에 따른 모래상토의 물리 화학적 특성변화를 조사하였다. 토양개량제의 혼합비율에 따라 상토의 물리 화학성을 조사한 결과는 다음과 같다. A와 C가 pH가 95% 수준에서 상관성을 나타내었고, C의 양이온치환용량이 95% 수준에서 상관성을 보여 토양개량제의 특성에 따라 상토의 토양화학성에 영향을 주었다. 상토의 토양물리성 결과를 통해 USGA 기준으로 평가할 때, 최적의 혼합비율은 토양개량제 A와 B에서는 3%였고, C는 7~10% 였다. 각 토양개량제들의 혼합에 따른 토양물리성변화에 가장 큰 영향을 미치는 물리적 요인은 총공극량이었다. 토양개량제의 혼합비율에 따른 토양개선효과 를 비교할 때, B는 모세관공극과 비모세관공극에서, C는 모세관공극, 총공극 및 수리전도 도에서 고도의 상관성을 나타내었다(P<0.05). 이들 결과를 통해 골프코스의 상토조성에 사용되는 무기성 토양개량제는 그 종류와 혼합비율이 USGA 상토의 뿌리층 개량의 토양 이화학성에 영향을 미치고 있음을 알 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.506-513
• /
• 2020

본 연구에서는 무기계 혼화재료인 제올라이트 및 활성 황토를 혼입한 모르타르의 역학적 특성, 흡수율, NOx 저감 성능을 평가하였다. 제올라이트 및 활성 황토는 결합재로서 시멘트의 대체재로 사용되었으며 치환율은 각 20, 30%로 설정하였다. 각 배합의 압축강도 및 휨강도를 평가한 결과, Plain 배합에서 가장 높은 강도가 평가되었다. 제올라이트 및 활성 황토의 혼입율이 증가할수록 강도가 낮아지는 경향이 나타났다. 또한 활성 황토와 제올라이트 혼입 배합간의 강도 차이는 미미한 수준으로 나타났다. 흡수율을 평가하기 위해 기존의 배합의 물-결합재 비를 낮추고 활성 황토 및 제올라이트의 치환률을 25%로 설정한 배합을 설계하였다. 제올라이트 혼입 배합에서 가장 높은 흡수율이 평가되었으며, 나머지 두 배합 간에 흡수율의 차이는 매우 적었다. 광촉매 코팅의 유무를 고려한 NOx 저감 성능을 평가한 결과, 동일 배합이라 하더라도 광촉매를 코팅함에 따라 뚜렷한 NOx 농도 저감이 나타났다. 또한 제올라이트 및 활성 황토는 다공성 성질을 갖기 때문에 Plain 배합 보다 높은 NOx 감소 성능을 나타내었다. 활성 황토 배합의 경우 흡수율은 제올라이트 배합보다 낮은 값을 나타내었지만, 제올라이트 혼입 배합보다 뛰어난 NOx 저감 성능이 나타났다.