• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.97-104
• /
• 2007

The object of this work is to analyze the macroscopic spray performance and atomization characteristics between diesel and biodiesel fuels. In this study, the effects of mixture ratios of biodiesel fuel on the spray tip penetration, fuel injection rate, spray cone angle, and the atomization characteristics such as droplet size, droplets distribution, and spray arrival time according to the axial distance were investigated at various injection parameters. It is revealed that the injection rate is more affected by injection pressure than mixture ratio. And, the spray development process is closely matched between diesel and biodiesel fuels. However, the droplet atomization characteristics of biodiesel shows deteriorated results as the mixture ratio of biodiesel increased because of the high viscosity and density.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.101-105
• /
• 2009

The purpose of this study is to reduce autogenous shrinkage of high-strength concrete. Previous studies were investigated to measure the effects of reductions to autogenous shrinkage when applying bean oil to concrete. The results of the study showed that as the mixture rate of BO increased, fluidity decreased and air quantity decreased slightly. In early age, compressed strength increased compared to Plain while decreased in long-term age. As an autogenous shrinkage characteristic, reduction effect increased according to increase in mixture rate. When mixture rate is 1%, approximately 30% decreased compared to Plain in BO. At 2%, BO decreased by about 32%. In addition, in the case of BO, autogenous shrinkage was shown to decrease compared to expansive additive and shrinkage-reducing agent.

• 음성과학
• /
• 제10권4호
• /
• pp.149-157
• /
• 2003

In this paper, we proposed the principal component analysis (PCA) fuzzy mixture model for speaker identification. A PCA fuzzy mixture model is derived from the combination of the PCA and the fuzzy version of mixture model with diagonal covariance matrices. In this method, the feature vectors are first transformed by each speaker's PCA transformation matrix to reduce the correlation among the elements. Then, the fuzzy mixture model for speaker is obtained from these transformed feature vectors with reduced dimensions. The orthogonal Gaussian Mixture Model (GMM) can be derived as a special case of PCA fuzzy mixture model. In our experiments, with having the number of mixtures equal, the proposed method requires less training time and less storage as well as shows better speaker identification rate compared to the conventional GMM. Also, the proposed one shows equal or better identification performance than the orthogonal GMM does.

• 한국대기환경학회지
• /
• 제25권6호
• /
• pp.503-511
• /
• 2009

VOC mixture was fed to a trickle bed air biofilter (TBAB) with step-change in influent mixture concentrations from 50 ppmv to 1,000 ppmv, corresponding to loadings of $5.7\;g/m^3/hr$ to $114.1\;g/m^3/hr$. VOC mixture was an equimolar ratio of two aromatic VOCs, i.e., toluene and styrene, and two oxygenated VOCs, i.e., methyl ethyl ketone (MEK) and methyl isobutyl ketone (MIBK). The TBAB system employed backwashing as biomass control. The experimental results showed that a critical loading rate for VOC mixture removal was determined to be about $60\;g/m^3/hr$, and critical loading rates for individual VOCs in the mixture were different. Specifically, toluene content in the mixture played a major role in the biofilter overall performance. As VOC mixture was fed beyond the critical loading rate, reacclimation of the biofilter to reach the 99% removal efficiency following backwashing was delayed, which was a critical factor in the biofilter performance. In the mass balance analysis, 63.8% of the carbon equivalent in VOCs removal was used for $CO_2$ production during the experimental runs. The 82.6% nitrogen utilized in the biofilter was contributed to microbial cell synthesis. The obtained results were compared against consistently high efficient performance of TBAB for VOC mixture by employing backwashing as biomass control.

• 한국초지조사료학회지
• /
• 제16권2호
• /
• pp.147-154
• /
• 1996

Rye(Secale cereale L.) shows lower dry matter yield and nutrient content when it was harvested before wintering. This study was conducted to investigate how effect forage rape(Brassicu napus Subsp oleifera), which carries early maturity and can be harvested before wintering, on the increase of the forage yield and nutrient content when rye was sown mixed with the rape. Optimum sowing rate of the rye/rape mixture was also pursued in this study. The five treatment of rye single, rape single, ryel20+rape 1Okg/ha, rye84+rape 7kg/ha and rye60+rape 5kg/ha were sown on 2 September 1989. Rape single plot was cut one time(l9 November 1989) and the other plots were cuted two times(19 November 1989 and 20 May 1990). In botanical composition of the mixtures, rape recorded dominant ratio with 64~69% at the autumn cut. The rye84+rape 7kg/ha mixture plot marked the highest dry matter yield with 4.46t/ha among all the experimental plot at the autumn cut(P<0.05). In year total yield of dry matter(t/ha), rye single, rape single, rye120+rape IOkg/ha, rye84+rape 7kg/ha and rye60+rape 5kg/ha marked 13.6, 4.1, 12.7, 12.9 and 11.8, respectively. In crude protein content, the rye single plot was 17.2% at the autumn cut on the other hand the mixture plots showed increasing tendency with 18.0~19.9%. In crude fiber content, the mixture plots were remarkably lower than rye single plot. In year total yield of crude protein, rye84+rape 7kg/ha mixture plot showed the highest yield with 1.6lt/ha among all the experimental plots. Ratio of crude protein yield to crude fiber yield, rye84+rape 7kg/ha tended to be higher than the other mixture plots. It is confirmed that the rye/rape mixture can produce more forage than the rye single cropping when they are harvested in late autumn, besides the mixture forage contains higher crude protein than that rye single forage. It can be said that the rydrape mixture is more useful than the rye single cropping, and optimum sowing rate of the mixture is 84kg/ha of rye+7kg/ha of rape.

• 한국가스학회지
• /
• 제15권3호
• /
• pp.39-46
• /
• 2011

본 연구에서는 DME와 n-Butane 연료를 사용하여 혼합연료 및 성층화효과가 HCCI 연소 특성에 미치는 영향을 화학반응수치계산을 통해서 알아보고자 한다. 우선, 기존에 완성된 DME와 n-Butane 반응스킴을 이용하여 새로운 화학 반응 모델을 만들고 기존의 DME 화학 반응 모델과 n-Butane 화학 반응 모델과 비교하여 유효성을 확보한다. 나아가, 자발화 특성이 다른 DME와 n-Butane 두 연료의 혼합비 변화에 따른 HCCI 연소 특성을 파악한다. 마지막으로, 혼합 연료를 각각 성층급기 했을 경우에 압력상승률 저감 효과를 파악 한다.

• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.6-14
• /
• 2003

The purpose of the present study is to investigate the method decreasing debinding time as well as lowering operation condition than pure supercritical $CO_2$ debinding by using cosolvent or binary mixture of propane + $CO_2$. First method is to add cosolvent, such as n-hexane, DCM, methanol, 1-butanol, in supercritical $CO_2$. In case of adding cosolvent, we were found the addition of non-polar cosolvent (n-hexane) improves dramatically the binder removal rate (more than 2 times) compared with pure supercritical $CO_2$ debinding, second method is to use mixture of supercritical propane + $CO_2$, as solvent. In case of using mixture of supercritical propane + $CO_2$, the rate of debinding speeded up with increasing of pressure and concentration of propane at 348.15 K. It was found that addition of cosolvent (e.g., n-hexane, DCM) and binary mixture propane + $CO_2$ for supercritical solvent remarkably improved binder removal rate for the paraffin wax-based binder system, in comparison with using pure supercritical $CO_2$.

• 한국분말재료학회지
• /
• 제5권1호
• /
• pp.64-70
• /
• 1998

Milling media of steel and partially stabilized zirconia(PSZ) were used to produce $Mo_3$Si by mechanical alloying(MA) of Mo-25.0at%Si elemental powder mixture. The effect of milling medium materials on MA of the powder mixture have been investigated by XRD and DTA. The reaction rate and the end-product noticeably depended upon the milling medium material. The formation of $Mo_3$Si and $Mo_5Si_3$phases by PSZ ball-milling took place after 15 hr of MA and was characterized by a slow reaction rate as Mo, Si, $Mo_5Si_3$ and $Mo_3$Si coexisted for a long period of milling time. The formation of a new phase by steel ball-milling, however, did not take Place even after 96 hr of MA. DTA and annealing results showed that $Mo_5Si_3$ and $Mo_3$Si were formed after heating the ball-milled powder specimens to different temperatures. At low temperatures, Mo and Si were transformed into $Mo_5Si_3$. At high temperatures, the formation of $Mo_3$Si can be partially attributed to the reaction, 7Mo+Si+$Mo_5Si_3$-.4$Mo_3$Si . The formation of $Mo_3$Si and Mo5Si3 phases by mechanical alloying of the powder mixture and the relevant reaction rate appeared to depend upon the milling medium material as well as the thermodynamic properties of the end-products.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.397-403
• /
• 2012

Galactose, an isomer of glucose with an opposite hydroxyl group at the 4-carbon, is a major fermentable sugar in various promising feedstock for hydrogen production including red algal biomass. In this study, hydrogen production characteristics of galactose-glucose mixture were investigated using batch fermentation experiments with heat-treated digester sludge as inoclua. Galactose showed a hydogen yield compatible with glucose. However, more complicated metabolic steps for galactose utilization caused a slower hydrogen production rate. The existence of glucose aggravated the hydrogen production rate, which would result from the regulation of galactose-utilizing enzymes by glucose. Hydrogen produciton rate at galactose to glucose ratio of 8:2 or 6:4 was 67% of the production rate for galactose and 33% for glucose, which could need approximately 1.5 and 3 times longer hydraulic retention time than galacgtose only condition and glucose only condition, respectively, in continuous fermentation. Hydrogen production rate, Hydrogen yield, and organic acid production at galactose to glucose ratio of 8:2 or 6:4 were 0.14 mL H2/mL/hr, 0.78 mol $H_2$/mol sugar, and 11.89 g COD/L, respectively. Galactose-rich biomass could be usable for hydogen fermenation, however, the fermentation time should be allowed enough.

• 한국수산과학회지
• /
• 제33권3호
• /
• pp.225-229
• /
• 2000

담수산 rotifer, B. calycinoms를 대상으로 5 종류의 먹이 (ESP, 담수산 농축 Chlonlla, 빵효모 단독구와 $ESP 70{\%}와 담수산 농축 Chlorella 30{\%} 혼합구 및 빵효모 30{\%}와 담수산 농축 Chlorella 70{\%}$ 혼합구)에 대한 내구란 생산과 먹이종류에 따라 생산된 내구란의 부화율을 조사하였다. 먹이 종류에 따른 내구란 생산은 $ESP 70{\%}$와 담수산 농축 Chlorella 30{\%}$ 혼합구와 빵효모 30{\%}$와 담수산 농축 Chlorells 70{\%}$ 혼합구에서 각각 123.3 개/ml와 126.7 개/ml로 가장 높게 나타났고, 단독구보다 혼합구에서 높게 나타났다. 또한 먹이에 따른 내구란의 부화율은 $ESP 70{\%}$와 담수산 농축 Chlorella $30{\%}$ 혼합구에서 $71.9{\%}$로 가장 높았지만 빵효모 $30{\%}$와 담수산 농축 Chlonlla $70{\%}$ 혼합구 및 담수산 농축 Chlorella 단독구와는 유의적인 차이는 보이지 않았다. 본 연구 결과, 담수산 rotifer의 내구란 생산 및 부화율을 높이기 위한 먹이로 담수산 농축 Chlorella에 빵효모와 ESP를 혼합하여 공급하는 것이 가장 효과적인 것으로 판단된다.