• 한국환경복원기술학회지
• /
• 제11권6호
• /
• pp.81-90
• /
• 2008

Recently, geofiber(polyester) reinforced soil was added on soil-seed mixture spray to control erosion and to improve vegetation growth on rocky slope sites. This research was conducted to compare vegetation effects and soil hardness on three types of soil-seed mixture spray on stone gabion river bank [A type : soil-seed mixture spray underlying 30cm thick sand with geofiber(geofiber reinforced soil system), B type : soil-seed mixture spray underlying 30cm thick sand without geofiber, C type : soil-seed mixture spray]. Evaluation were made concerning vegetation coverage, soil hardness and moisture content. The results of this study showed that A type system was effective for the growth of vegetation and soil hardness when compareed to B type and C type. A type and B type showed higher covering rate than C type on stone gabion river bank, and especially A type showed the highest covering rate. Soil hardness and water content were high on A type vegetation system compared to B type and C type. We noted that high soil hardness and high moisture content with geofiber(geofiber reinforced soil system) were effective both to control erosion from water current impact and to be high coverage and species of vegetation on stone gabion river bank.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.225-233
• /
• 1995

Experiments were performed to investigate the heat transfer characteristics of nonazeotropic mixture R-22+R-114 in a heat pump system. The ranges of parameter, such as heat flux, mass flow rate, and quality were $8,141{\sim}32,564W/m^2$, 24~58kg/h, and 0~1, respectively. The overall compositions of the mixtures were 50 and 100 per-cent of R-22 by weight for R-22+R-114 mixture. The results indicated that there were distinct different heat transfer phenomena between the pure substance and the mixture. In case of pure refrigerant the heat transfer rates for cooling were strongly dependent upon quality of the refrigerant. Overall evaporating heat transfer coefficients for the mixture were somewhat lower than pure R-22 values in the forced convective boiling region. For a given flow rate, the heat transfer coefficient at the circumferential tube wall(top, side, and bottom of the test tube) for R-22/R-114(50/50wt%)mixture, however, was higher than for pure R-22 at side and bottom of the tube. Furthermore, a prediction for the evaporating heat transfer coefficient of the mixtures was developed based on the method of Yoshida et.al.'s. The resulting correlation yielded a good agreement with the data for the refrigerant mixtures.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2675-2685
• /
• 1994

A study has been conducted to provide the experimental information for the velocity and temperature profiles of steam-air mixutre and to investigate their roles on the film condensation with wavy interface. Saturated gas mixture of steam-air was made to flow through the nearly horizontal$(4.1^{\circ})$ square duct of 0.1m width and 1.56m length at atmospheric pressure, and was condensated on the bottom cold plate. The air mass fraction in the gas mixture was changed from zero(W =0, pure steam) to one(W =1, pure air), and the bulk velocity was varied from 2 to 4 m/s. Water film was injected concurrently to investigate the effect of wavy interface on the condensation. The velocity and temperature profiles were measured by LDA system and thermocouples along the three parameters ; air mass fraction, mixture velocity and film flow rate. The profiles moved toward the interface with increasing steam mass fraction, mixture velocity and film flow rate. The Prandtl and Schmidt numbers were near one in the present experimental range, however there was no complete similarity between the velocity and temperature profiles of gas mixture. And the heat transfer characteristics and interfacial structure were coupled with each other.

• 한국약용작물학회지
• /
• 제23권4호
• /
• pp.271-276
• /
• 2015

This study was conducted to investigate the effect of shading degree and rooting media on the growth of Caragana sinica and Sedum middendorffianum after cutting. In C. sinica, the highest rooting rate was obtained in cuttings planted in horticultural soil (Sunshine Mix #1) and peat moss mixture (peat moss : perlite = 1 : 1, v/v) under one layer of 35% shading and in cuttings planted in kanumatsuchi soil mixture (kanumatsuchi soil : decomposition of granite = 1 : 1, v/v) under non-shading. Whereas, regardless of shading degree, most cuttings of S. middendorffianum rooted in both horticultural soil and peat moss mixture. Cuttings of C. sinica showed the highest root length, 10.4cm in kanumatsuchi soil mixture under one layer of 35% shading but the highest fresh and dry weight of roots in kanumatsuchi soil mixture under non-shading. In S. middendorffianum, the highest root length, fresh and dry weight of root were obtained in cuttings planted in horticultural soil under non-shading. With these results, we recommended that cuttings of C. sinica should be propagated in kanumatsuchi soil mixture under non-shading and cuttings of S. middendorffianum in horticultural soil under non-shading.

• 한국산학기술학회논문지
• /
• 제6권4호
• /
• pp.296-301
• /
• 2005

본 연구는 암비탈면 녹화시 음식물퇴비가 식생기반재료로 활용될 수 있는지에 대한 기초자료를 얻기 위해 실시되었다. 녹화용 식생으로 외래초종 Creeping red fescue(Festuca rubra), Perennial ryegrass(Lolium perenne) 2종을, 재래 초목본 쪽제비싸리(Amorpha fruticosa), 낭아초(Indigofera pseudo-tinctoria) 2종을 선정하여, 염분농도와 퇴비 사용량에 따른 종자별 발아특성 및 인공비탈면에서의 혼파실험을 통한 생육특성을 조사하였다. 염분농도에 따른 발아특성은 쪽제비싸리, 낭아초, Perennial ryegrass의 경우 $0.4\%$ 이상 NaCl 농도에서 발아율과 유아 및 유근길이가 급격히 감소하였으며, Creeping red fescue는 $0.2\%$ 이상 NaCl 농도에서 매우 급격한 생육저해가 일어났다. 퇴비 시용량에 따른 발아특성은 쪽제비싸리와 낭아초의 경우 모든 실험구에서 $45\%$ 내외의 발아를 보였으며, Perennial ryegrass는 퇴비시용량이 많을수록 초장의 성장이 증가하는 경향을 보였다. 피복률은 Mixture III가 $89.3\%$로 가장 높았으며, Mixture III > Mixture IV > Mixture II > Mixture I순이었다. Mixture I은 30일 후 $47.0\%$를 보였으나 45일 후에는 $64.1\%$로 높아졌다. 외래초종의 생육이 활발한 실험구 일수록 피복률이 높은 관계를 보였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.103-108
• /
• 2003

The control of flame shapes in a laminar pre-mixed flame has been experimentally investigated for propane/air pre-mixed laminar flames. Flames of different size and shapes are observed with heated wires or by controlling the equivalence ratio and flow rate of a mixture. The characteristics of the partitioning of a flame or the merge of flames are analyzed and explained by considering the balance between laminar flame speed and upstream mixture velocity. A combustor might be sized down while maintaining its heat production rate the same by partitioning a flame established in it. When the equivalence ratio of mixture is decreased, individual flames are merged together and the upstream mixture velocity can be practically decreased on a nozzle having opening ratio less than unity. As a result, the flame shape is to he adjusted until the newly established balanced condition is satisfied, and then. the stable combustion can be achieved again.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.111-114
• /
• 2009

본 연구에서는 고농도 과산화수소와 케로신을 사용하는 저추력 엔진의 촉매방식 점화기를 설계 제작하고, 수류시험을 통해 설계 압력 대비 유량을 확인하였다. 점화 성능 확인을 위해 과산화수소 분해열이 정상상태에 도달하는 지점에서의 케로신 유량변화에 따른 혼합비를 변화시켰고, 넓은 범위의 혼합비에서 안정된 점화특성을 확인하였다.

• Archives of Pharmacal Research
• /
• 제9권1호
• /
• pp.55-61
• /
• 1986

To increase the dissolution rate of piroxicam, chitin and chitosan which are widely occurring biodegradable natural materials were used as drug carriers. The ground mixtures of piroxicam with chitin or chitosan were prepared by grinding in a ball mill. The dissolution rates of piroxicam from the ground mixtures were enhanced markedly than that from the physical mixtures or from intact piroxicam. The X-ray diffraction peaks disappeared in the ground mixture indicating the production of the amorphous form. The comparison of infrared spectra of the physical mixture and the ground minture showed an interaction such as association between the functional groups of piroxicam and chitin or chitosan in the molecular level. The weight losses in TGA curves shoed all the same patterns. However, in the ground mixture by DTA curve, the undothermic peak due to the fusion of piroxicam was disappeared indicating the different thermal property.

• 음성과학
• /
• 제14권1호
• /
• pp.151-162
• /
• 2007

This study focuses on the classification of pathological voice using GMM (Gaussian Mixture Model) and compares the results to the previous work which was done by ANN (Artificial Neural Network). Speech data from normal people and patients were collected, then diagnosed and classified into two different categories. Six characteristic parameters (Jitter, Shimmer, NHR, SPI, APQ and RAP) were chosen. Then the classification method based on the artificial neural network and Gaussian mixture method was employed to discriminate the data into normal and pathological speech. The GMM method attained 98.4% average correct classification rate with training data and 95.2% average correct classification rate with test data. The different mixture number (3 to 15) of GMM was used in order to obtain an optimal condition for classification. We also compared the average classification rate based on GMM, ANN and HMM. The proper number of mixtures on Gaussian model needs to be investigated in our future work.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.273-279
• /
• 1998

Unite cell of soid oxide fuel cell (SOFC) that consists of a dense yttria-stabilized zirconia(YSZ) electrolyte a porous nickel-YSZ cermet anode and a porous strontium- doped lanthanum manganate(LSM) cathod was fabricated from using pore former through co-firing technique. Initial sintering shrinkage rates of each layer were identified for fabricating SOFC. Heterogenous sintering was very effective in tailoring shrinkage rate for three layers. The powder tailoring necessary for shrinkage rate matching are as follows ; electrolyte of 60% TZ8YS/ 40% TZ8Y mixture anode of 51wt% NiO/49 wt% (70wt% TZ8YS/30 wt% UT ZrO2) mixture and cathode of 80% LSM/20% UT ZrO2 mixture . The overall sintering shrinkage rate differences of three layers using these compositions were maintained in a few percent.