• 전기학회논문지
• /
• 제67권12호
• /
• pp.1633-1640
• /
• 2018

Epoxy resin is a polar thermosetting polymer that is widely employed in different branches of industry and everyday life, due to their stable physical and chemical properties. Of all the polymer materials currently being used in the electrical insulation industry, epoxy resin is the most widely used kind, chosen as the base polymer material in the present study. Composites were prepared according to the mixing ratio (MS: MA, 1: 9, 3: 7, 5: 5, 7: 3, 9: 1)of mixture for Heterogeneous Minerals(Micro Silica:MS, Micro Alumina:MA) (MS+MA). We have investigated for AC electrical insulation breakdown characteristics and the dielectric properties (permittivity, dielectric loss, and conductivity) with frequency changes. The electrical AC insulation breakdown performance was improved with the increase of the mixing ratio of MS according to heterogeneous mineral material mixture(MS+MA). As Dielectric properties, the dielectric constant and dielectric loss increased with decreasing frequency and decreased with increasing MS content ratio of heterogeneous mineral mixture. Tensile strength and flexural strength according to the mixing ratio (MS + MA) of epoxy / heterogeneous mineral mixture were studied by mechanical properties. The performance of mechanical tensile and flexural strength was significantly improved as the fill contents ratio of MS increased.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.53-58
• /
• 2001

Constructions on the soft clay layer of low strength and high compression bring out many problems. Recent studies show that strength of the soft clay layer could be substantially improved by mixing quicklime. For the purpose, a series of uniaxial compression tests were performed, using quicklime, in order to analyze strength characteristics. The major test results are summarized following : When water content is 90%, the strength is observed to precipitously increase between 3～14 days, then, the extent slowly increase in relative terms. When water content is 130%, the strength is observed to precipitously increase up to 28 days. When the strength of water content 90% is compared to that of water content 130%, the initial strength of the former is higher than that of the latter. The analyses show that the improvement of soft clay layers can be realized by the mixture of both quicklime and sand, and by the mixture of quicklime only.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.39-47
• /
• 2012

The objective of this study was to develop a strength prediction model using a polynomial regression analysis based on the experimental results obtained from ninety samples. As the results of a correlation analysis between various mixing factors and unconfined compressive strength using SPSS (statistical package for the social sciences), the governing factors in the strength of lightweight soil were found to be the crumb rubber content, bottom ash content,and water-cement ratio. After selecting the governing factors affecting the strength through the correlation analysis, a strength prediction model, which consisted of the selected governing factors, was developed using the polynomial regression analysis. The strengths calculated from the proposed model were similar to those resulting from laboratory tests (R2=87.5%). Therefore, the proposed model can be used to predict the strength of lightweight mixtures with various mixing ratios without time-consuming experimental tests.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.489-492
• /
• 2008

본 연구에서는 공공 및 민간의 전력수요가 증가함에 따라 화력발전소에서 다량으로 발생하고 있는 석탄재의 약 10${\sim}$15%정도를 차지하는 Bottom Ash를 유효재활용하기 위하여 Bottom Ash 굵은골재 혼입에 따른 콘크리트의 기초적 물성 및 강도특성을 분석하였다. 그 결과, Bottom Ash 굵은골재의 혼입률이 증가할수록 슬럼프는 감소하는 경향을 나타내었으며, 혼입하지 않은 경우에 비하여 약 4.5${\sim}$54.2%정도 감소하였다. 이에 비하여 공기량은 Bottom Ash 굵은골재를 혼입함에 따라 거의 영향이 없고 그 차이는 미소한 것으로 나타났다. 블리딩의 경우는 슬럼프의 경향과 유사하였으며 Bottom Ash 굵은골재의 혼입률이 증가함에 따라 초기의 블리딩이 현저하게 감소하였다. 또한, 압축강도는 Bottom Ash 굵은골재의 혼입률이 증가할수록 감소하였으며 혼입률 40%까지는 혼입하지 않은 경우에 비하여 약 1.1${\sim}$5.3%정도 감소하였고, 혼입률 60% 이상에서 급격히 감소하여 압축강도는 Plain의 약 85.2${\sim}$87.7%정도 발현하였다. 따라서, 콘크리트용 굵은골재로서 Bottom Ash 굵은골재를 대량으로 활용하기 위해서는 강도향상의 보강요소를 사용하는 것이 검토되어야 할 것으로 판단된다.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1135-1144
• /
• 2023

In this paper, bending strength and permeability tests were conducted on concrete permeable blocks manufactured by recycling industrial by-products of oyster shell and blast furnace slag to measure and compare bending strength and permeability coefficient, and present experimental research results. To this end, a total of 54 specimens with a size of 200x200x60mm for surface layer and base layer were manufactured, and bending strength and permeability test were carried ourt accoridng to KS F 4419. Eighteen types of mixing designs were implemented by varying the mixing and replacement rates of oyster shells and blast furnace slag. As a result of the experiment, the higher the mixing ratio of oyster shell, the lower the bending strength and the permeability coefficient. Thereafter, a total of three permeable blocks with dimensions of 200x200x60mm were manufactured and subjected to bending strength and permeability tests according to KS F 4419. As a result of the test, the bending strength satisfies the standard of KS F 4419, and the permeability coefficient is 12 times higher than the standard of KS F 4419. It seems that the proper mixing of oyster shells and blast furnace slag increases the amount of air, and further research on durability and economic feasibility of materials used to manufacture permeable blocks is required.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.1-10
• /
• 2013

본 연구에서는 OPC 및 BFS 혼입 콘크리트의 초기재령 압축강도 향상을 위해 산업부산물인 티탄석고, 정수오니를 활용하여 경제성을 만족하면서 콘크리트의 조기강도(재령 1, 3일)를 향상시킬 수 있는 촉진제(이하 HSB) 개발을 위한 기초적 연구를 실시하였다. 조강형 분체의 제조를 위한 산업부산물의 조합 비율은 기초 실험 및 성분분석을 통해 티탄석고(4) : 석회석(3) : 정수오니(3)의 비율로 조합을 확정하였으며, HSB의 혼입률은 사전시험을 거쳐(7~9) %가 적정한 것으로 나타났다. 페이스트 경화체의 SEM 촬영 결과 HSB 혼입을 통한 자극으로 인해 수화반응이 촉진되어 수화생성물이 다량 분포한 것을 SEM 측정을 통해 확인 할 수 있었으며, HSB 혼입 콘크리트 압축강도 측정결과 HSB를 혼입함에 따라 Plain 배합에 비해 초기재령에서 높은 압축강도 발현율을 나타내는 것을 확인할 수 있었다. 또한 GHSB에 비해 FHSB 배합이 더욱 우수한 강도를 나타내었으며, FHSB 치환율이 증가함에 따라 압축강도는 소폭 상승하는 결과를 나타내었다. 한편, HSB 및 혼합시멘트를 사용한 콘크리트의 경우 촉진재 종류에 관계없이 촉진재 치환율 9 %에서 Plain 배합 이상의 조기강도를 발현하는 것으로 나타났으며, 촉진재 종류에 따른 영향을 알아본 결과, GHSB에 비해 FHSB가 재령 1, 3일에는 더욱 우수한 조기강도 발현성능을 나타내었다.

• 한국농공학회지
• /
• 제30권3호
• /
• pp.106-113
• /
• 1988

This study was performed to obtain the basic data which can be applied to use of foamihg mortars. 1. At the mixing ratio 1:1, the highest strengths were showed by foaming mortam, respec - tively. But, it. gradually was decreased in poorer mixing ratio and more addition of foam- ing agent. The decreasing rates of strengths were incresed in poorer mixing ratio and more addition of foaming agent. 2. The strengths were decreased up to 77.0-92.8% by mix-foaming type and 36.7-74.4% by pre-foamed type than cement mortar. 3. At the mixing ratio of 1:1, the lowest air contents were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of air contents were increased in richer mixing ratio and more addition of foaming agent. 4. Air contents were showed up to 26.0-63.8 times by mix-foaming type and 5.8-17.7 times by pre-foamed type than cement mortar, respectively. 5. The correlations between compressive strength and air content were highly significant, respectively. The multiple regression equations of strengths and air content were computed depending on a fuction of mixing ratio and addition of foarning agent. It was highly significant, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.412-419
• /
• 2009

Large quantity of extra soils discharged from excavation site in Songdo area can be treated by hardening agents and utilized in surface stabilized layer overlying thick reclaimed soft soil deposit. Though surface layer stabilization method using cement or lime for very soft soils has been studied in recent years, but studies on moderately soft clayey silt has not been tried. The purpose of this research is to investigate optimum mixing condition for stabilizing Songdo marine soil with low plasiticity. The optimum mixing conditions of hardening agents with Songdo soil such as kind of agents, mixing ratio, initial water content and curing time are investigated by uniaxial compression test and laboratory vane test. The results indicate that strength increases with high mixing ratio and long curing time, while decreases drastically under certain water content before mixing. Finally, optimum mixing condition considering economic efficiency and workability with test results was proposed.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.229-235
• /
• 2018

본 연구에서는 순환골재 콘크리트의 품질안정화를 목표로 기술 개발한 골재 혼합설비를 활용하여 순환골재 및 천연골재를 사전 혼합하였으며, 생산 된 혼합골재를 적용하여 혼합 전과 혼합 후의 콘크리트 특성을 검토하였다. 이렇게 도출된 결과를 토대로 순환골재의 품질 안정화 및 사용 활성화를 위한 새로운 방향을 제시하고자 하였다. 골재 혼합 전 후에 따른 믹서로 비빈 굳지 않은 콘크리트 중의 모르타르와 굵은 골재량의 변화율 시험 결과 사전 골재 혼합 시 혼합 전 콘크리트 대비 모르타르 및 굵은 골재량의 편차가 줄어드는 것으로 확인되었다. 재령 3일과 재령 7일에서의 압축강도 편차 및 평균압축강도는 혼합 전 후 비슷한 결과를 나타냈으며, 28일 강도에서는 재령 3, 7일보다 혼합 전 후 강도 편차가 크게 발생했다. 사전 골재 혼합을 통한 혼합골재 사용 시 강도 편차가 줄어드는 것으로 확인되었으며, 사전 골재 혼합을 통한 혼합골재 사용 시 장기강도 발현이 유리할 것으로 사료된다. 위의 결과를 토대로 순환골재 및 천연골재 사전 혼합을 통해 생산된 혼합골재를 사용한 콘크리트 결과 굵은골재량, 압축강도 편차가 줄어드는 것으로 나타나 사전 골재혼합을 통해 균질한 콘크리트를 생산할 수 있는 것으로 판단된다. 이는 생산되는 순환골재 특성에 따라 천연골재와 사전 혼합을 통해 균질한 골재 특성을 맞춰 생산할 수 있으며, 순환골재의 문제점 중 하나인 품질편차를 해결할 방안으로 고려된다.

• 한국농공학회지
• /
• 제41권1호
• /
• pp.72-78
• /
• 1999

The purpose of this study was to evaluate the properties of unconfined strength of dry soil which was reinforced with polypropylene fiber. It is found that unconfined compressive strength and strain of dry soil without fiber were decreased as water content was increased. As mixing ration of fiber was increased , unconfined compressive strength and failure strain of dry soil reinforced with polypropylene fiber were increased. When mixing ration was larger than 0.5 % , unconfined compressive strength was gradually increased. The longer fiber was, the largest post peak strength was obtained and the larger strain was reached. Tensile strength of dried fiber reinforced soil was larger than that of dry soil without fiber.